提交 · dae409a27788774adb810f7cdb771ba7cce7af8a · openeuler / Kernel

17 4月, 2005 40 次提交

[PATCH] add Big Endian variants of ioread/iowrite · dae409a2

由 James Bottomley 提交于 4月 16, 2005

In the new io infrastructure, all of our operators are expecting the
underlying device to be little endian (because the PCI bus, their main
consumer, is LE).

However, there are a fair few devices and busses in the world that are
actually Big Endian.  There's even evidence that some of these BE bus and
chip types are attached to LE systems.  Thus, there's a need for a BE
equivalent of our io{read,write}{16,32} operations.

The attached patch adds this as io{read,write}{16,32}be.  When it's in,
I'll add the first consume (the 53c700 SCSI chip driver).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dae409a2

[PATCH] efi: eliminate bad section references · c41f5eb3

由 maximilian attems 提交于 4月 16, 2005

Randy please double check especially this one.
there may be a better solution.

Fix efi section references:
 remove __initdata for struct efi efi_phys 
 and struct efi_memory_map memmap

Error: ./arch/i386/kernel/efi.o .text refers to 000000d3 R_386_32
.init.data
Error: ./arch/i386/kernel/efi.o .text refers to 000000ff R_386_32
.init.data

efi_memmap_walk (which is not __init nor static) 
accesses both efi_phys and memmap.
Signed-off-by: Nmaximilian attems <janitor@sternwelten.at>
Acked-by: NRandy Dunlap <rddunlap@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

c41f5eb3

[PATCH] hd: eliminate bad section references · fca44804

由 maximilian attems 提交于 4月 16, 2005

Fix hd section references:
make parse_hd_setup() __init

Error: ./drivers/ide/legacy/hd.o .text refers to 00000943 R_386_PC32
.init.text
Signed-off-by: Nmaximilian attems <janitor@sternwelten.at>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fca44804

[PATCH] pnpbios: eliminate bad section references · ffbe5523

由 maximilian attems 提交于 4月 16, 2005

one of the last buildcheck errors on i386, thanks Randy again for double
checking.

Fix pnpbios section references:
make dmi_system_id pnpbios_dmi_table __initdata

Error: ./drivers/pnp/pnpbios/core.o .data refers to 00000100 R_386_32
.init.text
Error: ./drivers/pnp/pnpbios/core.o .data refers to 0000012c R_386_32
.init.text
Signed-off-by: Nmaximilian attems <janitor@sternwelten.at>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ffbe5523

[PATCH] Fix comment in list.h that refers to nonexistent API · e1ba0dab

由 Paul E. McKenney 提交于 4月 16, 2005

The hlist_for_each_entry_rcu() comment block refers to a nonexistent
hlist_add_rcu() API, needs to change to hlist_add_head_rcu().
Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e1ba0dab

[PATCH] Direct IO async short read fix · 29504ff3

由 Daniel McNeil 提交于 4月 16, 2005

The direct I/O code is mapping the read request to the file system block. If
the file size was not on a block boundary, the result would show the the read
reading past EOF. This was only happening for the AIO case. The non-AIO case
truncates the result to match file size (in direct_io_worker). This patch
does the same thing for the AIO case, it truncates the result to match the
file size if the read reads past EOF.

When I/O completes the result can be truncated to match the file size
without using i_size_read(), thus the aio result now matches the number of
bytes read to the end of file.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

29504ff3

[PATCH] undo do_readv_writev() behavior change · 1f08ad02

由 Dave Hansen 提交于 4月 16, 2005

Bugme bug 4326: http://bugme.osdl.org/show_bug.cgi?id=4326 reports:

executing the systemcall readv with Bad argument
->len == -1) it gives out error EFAULT instead of EINVAL 
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

1f08ad02

[PATCH] officially deprecate register_ioctl32_conversion · 22a685d0

由 Christoph Hellwig 提交于 4月 16, 2005

These have been deprecated since ->compat_ioctl when in, thus only a short
deprecation period.  There's four users left: i2o_config, s390/z90crypy,
s390/dasd and s390/zfcp and for the first two patches are about to be
submitted to get rid of it.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

22a685d0

[PATCH] kill #ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER in signal.c · 6cae60fe

由 Christoph Hellwig 提交于 4月 16, 2005

Now that no architectures defines HAVE_ARCH_GET_SIGNAL_TO_DELIVER anymore
this can go away.  It was a transitional hack only.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

6cae60fe

[PATCH] quota: possible bug in quota format v2 support · e821d94d

由 Niu YaWei 提交于 4月 16, 2005

Don't put root block of quota tree to the free list (when quota file is
completely empty).  That should not actually happen anyway (somebody should
get accounted for the filesystem root and so quota file should never be
empty) but better prevent it here than solve magical quota file
corruption.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e821d94d

[PATCH] quota: fix possible oops on quotaoff · 31e7ad6a

由 Jan Kara 提交于 4月 16, 2005

Remove dquot structures from quota file on quotaon - quota code does not
expect them to be there.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

31e7ad6a

[PATCH] ext2 corruption - regression between 2.6.9 and 2.6.10 · e072c6f2

由 Bernard Blackham 提交于 4月 16, 2005

Whilst trying to stress test a Promise SX8 card, we stumbled across
some nasty filesystem corruption in ext2. Our tests involved
creating an ext2 partition, mounting, running several concurrent
fsx's over it, umounting, and fsck'ing, all scripted[1]. The fsck
would always return with errors.

This regression was traced back to a change between 2.6.9 and
2.6.10, which moves the functionality of ext2_put_inode into
ext2_clear_inode. The attached patch reverses this change, and
eliminated the source of corruption.

Mingming Cao <cmm@us.ibm.com> said:

I think his patch for ext2 is correct. The corruption on ext3 is not the same
issue he saw on ext2. I believe that's the race between discard reservation
and reservation in-use that we already fixed it in 2.6.12- rc1.

For the problem related to ext2, at the time when we design reservation for
ext3, we decide we only need to discard the reservation at the last file
close, so we have ext3_discard_reservation on iput_final- >ext3_clear_inode.

The ext2 handle discard preallocation differently at that time, it discard the
preallocation at each iput(), not in input_final(), so we think it's
unnecessary to thrash it so frequently, and the right thing to do, as we did
for ext3 reservation, discard preallocation on last iput(). So we moved the
ext2_discard_preallocation from ext2_put_inode(0 to ext2_clear_inode.

Since ext2 preallocation is doing pre-allocation on disk, so it is possible
that at the unmount time, someone is still hold the reference of the inode, so
the preallocation for a file is not discard yet, so we still mark those blocks
allocated on disk, while they are not actually in the inode's block map, so
fsck will catch/fix that error later.

This is not a issue for ext3, as ext3 reservation(pre-allocation) is done in
memory.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e072c6f2

[PATCH] fix up newly added jsm driver · 614a7d6a

由 Christoph Hellwig 提交于 4月 16, 2005

 - plug various leaks and use after frees in the remove and
   initialization failure path (some still left)
 - remove useless global list of boards and use pci_set_drvdata instead
 - unobsfucate init path by merging functions together
 - kill various totally useless state variables
 - .. probably more I forgot

Note that the tty part still generates lots of sparse warnings and there's
still a totally useless layer of function pointer indirections, but maybe
someone else will fix that bit up.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

614a7d6a

[PATCH] use cheaper elv_queue_empty when unplug a device · a2997382

由 Ken Chen 提交于 4月 16, 2005

In function __generic_unplug_device(), kernel can use a cheaper function
elv_queue_empty() instead of more expensive elv_next_request to find
whether the queue is empty or not.  blk_run_queue can also made conditional
on whether queue's emptiness before calling request_fn().
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

a2997382

[PATCH] fix module_param_string() calls · 975e046c

由 Bert Wesarg 提交于 4月 16, 2005

This patch fix 3 calls to module_param_string() in
driver/media/video/tuner-core.c and drivers/media/video/tda9887.c.  In all
three places, the len and the perm parameter was switched.
Signed-off-by: NBert Wesarg <wesarg@informatik.uni-halle.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

975e046c

[PATCH] kernel/param.c: don't use .max when .num is NULL in param_array_set() · 31143a12

由 Bert Wesarg 提交于 4月 16, 2005

there seems to be a bug, at least for me, in kernel/param.c for arrays with
.num == NULL.  If .num == NULL, the function param_array_set() uses &.max
for the call to param_array(), wich alters the .max value to the number of
arguments.  The result is, you can't set more array arguments as the last
time you set the parameter.

example:

# a module 'example' with
# static int array[10] = { 0, };
# module_param_array(array, int, NULL, 0644);

$ insmod example.ko array=1,2,3
$ cat /sys/module/example/parameters/array
1,2,3
$ echo "4,3,2,1" > /sys/module/example/parameters/array
$ dmesg | tail -n 1
kernel: array: can take only 3 arguments
Signed-off-by: NBert Wesarg <wesarg@informatik.uni-halle.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

31143a12

[PATCH] AYSNC IO using singals other than SIGIO · fc9c9ab2

由 Bharath Ramesh 提交于 4月 16, 2005

A question on sigwaitinfo based IO mechanism in multithreaded applications.

I am trying to use RT signals to notify me of IO events using RT signals
instead of SIGIO in a multithreaded applications. I noticed that there was
some discussion on lkml during november 1999 with the subject of the
discussion as "Signal driven IO". In the thread I noticed that RT signals
were being delivered to the worker thread. I am running 2.6.10 kernel and
I am trying to use the very same mechanism and I find that only SIGIO being
propogated to the worker threads and RT signals only being propogated to
the main thread and not the worker threads where I actually want them to be
propogated too. On further inspection I found that the following patch
which I have attached solves the problem.

I am not sure if this is a bug or feature in the kernel.

Roland McGrath <roland@redhat.com> said:

This relates only to fcntl F_SETSIG, which is a Linux extension. So there is
no POSIX issue. When changing various things like the normal SIGIO signalling
to do group signals, I was concerned strictly with the POSIX semantics and
generally avoided touching things in the domain of Linux inventions. That's
why I didn't change this when I changed the call right next to it. There is
no reason I can see that F_SETSIG-requested signals shouldn't use a group
signal like normal SIGIO does. I'm happy to ACK this patch, there is nothing
wrong with its change to the semantics in my book. But neither POSIX nor I
care a whit what F_SETSIG does.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fc9c9ab2

[PATCH] possible use-after-free of bio · 4a534f93

由 Jens Axboe 提交于 4月 16, 2005

There is a possibility that a bio will be accessed after it has been freed
on SCSI.  It happens if you submit a bio with BIO_SYNC marked and the
auto-unplugging kicks the request_fn, SCSI re-enables interrupts in-between
so if the request completes between the add_request() in __make_request()
and the bio_sync() call, we could be looking at a dead bio.  It's a slim
race, but it has been triggered in the Real World.

So assign bio_sync() to a local variable instead.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

4a534f93

[PATCH] uml: fix compilation for __CHOOSE_MODE addition · 9c340d80

由 Paolo 'Blaisorblade' Giarrusso 提交于 4月 16, 2005

I had added the __CHOOSE_MODE syntax to fix some warnings with newer GCC's
in the uml-fix-cond-expr-as-lvalues-warning patch.

Here is the update from the version I sent to make it work also when only
one mode (TT or SKAS) is enabled.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

9c340d80

[PATCH] swsusp: SMP fix · 43117a08

由 Alexander Nyberg 提交于 4月 16, 2005

Fix some smp_processor_id-in-preemptible warnings
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

43117a08

[PATCH] fix few remaining u32 vs. pm_message_t problems · bf2049f9