- 18 4月, 2013 5 次提交
-
-
由 Daniel Borkmann 提交于
Just a minor edit to simplify the function. No need for this error variable here. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
sctp_outq is embedded into sctp_association, and thus never kmalloced in any way. Also, malloced is always 0, thus kfree() is never called. Therefore, remove that dead piece of code. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
sctp_inq is never kmalloced, since it's integrated into sctp_ep_common and only initialized from eps and assocs. Therefore, remove the dead code from there. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
sctp_ssnmap_init() can only be called from sctp_ssnmap_new() where malloced is always set to 1. Thus, when we call sctp_ssnmap_free() the test for map->malloced evaluates always to true. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch由 David S. Miller 提交于
Jesse Gross says: ==================== A number of improvements for net-next/3.10. Highlights include: * Properly exposing linux/openvswitch.h to userspace after the uapi changes. * Simplification of locking. It immediately makes things simpler to reason about and avoids holding RTNL mutex for longer than necessary. In the near future it will also enable tunnel registration and more fine-grained locking. * Miscellaneous cleanups and simplifications. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2013 16 次提交
-
-
由 Fabio Estevam 提交于
commit 7b7a2bbb (atl1: Remove unneeded PM_OPS definitions) removed the definition of atl1_suspend for the !CONFIG_PM_SLEEP case. So only call atl1_suspend() when CONFIG_PM_SLEEP is defined and fix the following build error from randconfig: drivers/net/ethernet/atheros/atlx/atl1.c: In function 'atl1_shutdown': drivers/net/ethernet/atheros/atlx/atl1.c:2888:2: error: implicit declaration of function 'atl1_suspend' [-Werror=implicit-function-declaration] Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. It consists of a patch by Oliver Hartkopp. In this patch he cleans up the sja1000 header file by using a common prefix for all sja1000 defines. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
Using SIMPLE_DEV_PM_OPS can make the code smaller and simpler. Also change CONFIG_PM to CONFIG_PM_SLEEP. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
If we can't _up() after changing the MTU, report the actual error instead of -ENOMEM. It can be really misleading cause pch_gbe is usually used in scenarios where the memory amount is really small, and thus hiding the real cause. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atzm Watanabe 提交于
This patch allows setting VXLAN destination to unicast address. It allows that VXLAN can be used as peer-to-peer tunnel without multicast. v4: generalize struct vxlan_dev, "gaddr" is replaced with vxlan_rdst. "GROUP" attribute is replaced with "REMOTE". they are based by David Stevens's comments. v3: move a new attribute REMOTE into the last of an enum list based by Stephen Hemminger's comments. v2: use a new attribute REMOTE instead of GROUP based by Cong Wang's comments. Signed-off-by: NAtzm Watanabe <atzm@stratosphere.co.jp> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
There is no need to add a dozen unions each time at the start of the function. So, do this once and use it instead. Thus, we can remove some duplicate code and make it more readable. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dilip Daya 提交于
sctp: Add buffer utilization fields to /proc/net/sctp/assocs This patch adds the following fields to /proc/net/sctp/assocs output: - sk->sk_wmem_alloc as "wmema" (transmit queue bytes committed) - sk->sk_wmem_queued as "wmemq" (persistent queue size) - sk->sk_sndbuf as "sndbuf" (size of send buffer in bytes) - sk->sk_rcvbuf as "rcvbuf" (size of receive buffer in bytes) When small DATA chunks containing 136 bytes data are sent the TX_QUEUE (assoc->sndbuf_used) reaches a maximum of 40.9% of sk_sndbuf value when peer.rwnd = 0. This was diagnosed from sk_wmem_alloc value reaching maximum value of sk_sndbuf. TX_QUEUE (assoc->sndbuf_used), sk_wmem_alloc and sk_wmem_queued values are incremented in sctp_set_owner_w() for outgoing data chunks. Having access to the above values in /proc/net/sctp/assocs will provide a better understanding of SCTP buffer management. With patch applied, example output when peer.rwnd = 0 where: ASSOC ffff880132298000 is sender ffff880125343000 is receiver ASSOC SOCK STY SST ST HBKT ASSOC-ID TX_QUEUE RX_QUEUE \ ffff880132298000 ffff880124a0a0c0 2 1 3 29325 1 214656 0 \ ffff880125343000 ffff8801237d7700 2 1 3 36210 2 0 524520 \ UID INODE LPORT RPORT LADDRS <-> RADDRS HBINT INS OUTS \ 0 25108 3455 3456 *10.4.8.3 <-> *10.5.8.3 7500 2 2 \ 0 27819 3456 3455 *10.5.8.3 <-> *10.4.8.3 7500 2 2 \ MAXRT T1X T2X RTXC wmema wmemq sndbuf rcvbuf 4 0 0 72 525633 440320 524288 524288 4 0 0 0 1 0 524288 524288 Signed-off-by: NDilip Daya <dilip.daya@hp.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Devendra Naga 提交于
the work has been scheduled from interrupt, and not been cancelled when the driver is unloaded, which doesn't remove the work item from the global workqueue. call the cancel_work_sync when the driver is removed (rmmod'ed). Cc: Sriram <srk@ti.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Vinay Hegde <vinay.hegde@ti.com> Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Update debugging messages to a more current style. Emit these debugging messages at KERN_DEBUG instead of KERN_DEFAULT. Add and use neigh_dbg(level, fmt, ...) macro Add dynamic_debug capability via pr_debug Convert embedded function names to "%s: ", __func__ Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sascha Herrmann 提交于
Implemented separate irq handling for edge and level type interrupt configuration. For edge type interrupts calls to disable_irq_nosync() and enable_irq() are removed. The at86rf230 resets the irq line only after the irq status register is read. Disabling the irq can lock the driver in situations where a irq is set by the radio while the driver is still reading the frame buffer. With irq_type configuration set to 0 the original behavior is preserverd. Additional the irq filter register is set to filter out all unused interrupts and the irq status register is read in the probe function to clear the irq line. Signed-off-by: NSascha Herrmann <sascha@ps.nvbi.de> Conflicts: drivers/net/ieee802154/at86rf230.c Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sascha Herrmann 提交于
Add option to at86rf230 platform data to configure the type of the interrupt used by the driver. The irq polarity of the device will be configured accordingly. Signed-off-by: NSascha Herrmann <sascha@ps.nvbi.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
SIMPLE_DEV_PM_OPS macro can handle !CONFIG_PM_SLEEP case nicely, so there is no need to define PM_OPS for both CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP cases. Remove the unneeded definitions. Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2013 11 次提交
-
-
由 Oliver Hartkopp 提交于
This is a follow up patch to: f901b6bc can: sja1000: fix define conflict on SH That patch fixed a define conflict between the SH architecture and the sja1000 driver, by addind a prefix to one macro only. This patch consistently renames the prefix of the SJA1000 controller registers from "REG_" to "SJA1000_". Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Pravin B Shelar 提交于
Rather than defining ovs specific stats struct (vport_percpu_stats), we can use existing pcpu_tstats to achieve exactly same functionality. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com>
-
由 Pravin B Shelar 提交于
Currently OVS uses combination of genl and rtnl lock to protect datapath state. This was done due to networking stack locking. But this has complicated locking and there are few lock ordering issues with new tunneling protocols. Following patch simplifies locking by introducing new ovs mutex and now this lock is used to protect entire ovs state. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NJesse Gross <jesse@nicira.com>
-
由 David S. Miller 提交于
Vlad Yasevich says: ==================== Current dev_[uc|mc]_addr_sync() API currently correctly syncs the addresses to the first device. Any subsequent calls to sync will not do anything since the synched variable will be set. This variable is used as an optimization to skip over addresses that have been synched. There are some devices (ex: team) that attempt to do the above. There is other work in progress that needs to above to work corretly. The short series introduces dev_[uc|mc]_addr_synch_multiple() that allows multiple calls to sync to multiple different devices. Original API is left alone and still has the limitation. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Team drivers attempts to sync addresses to each of the port devices; however, the current api doesn't really perform the sync for any device after the first one. Switch to using the new api that will actually sync the addresses to all ports. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The current implementation of dev_uc_sync/unsync() assumes that there is a strict 1-to-1 relationship between the source and destination of the sync. In other words, once an address has been synced to a destination device, it will not be synced to any other device through the sync API. However, there are some virtual devices that aggreate a number of lower devices and need to sync addresses to all of them. The current API falls short there. This patch introduces a new dev_uc_sync_multiple() api that can be called in the above circumstances and allows sync to work for every invocation. CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Since dead only holds two states (0,1), make it a bool instead of a 'char', which is more appropriate for its purpose. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
There is actually no need to keep this member in the structure, because after init it's always 1 anyway, thus always kfree called. This seems to be an ancient leftover from the very initial implementation from 2.5 times. Only in case the initialization of an association fails, we leave base.malloced as 0, but we nevertheless kfree it in the error path in sctp_association_new(). Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
The first backtrace appears on tx path with DMA mapping operations debug enabled. [ 345.637919] ------------[ cut here ]------------ [ 345.637971] WARNING: at lib/dma-debug.c:937 check_unmap+0x4df/0x910() [ 345.637977] Hardware name: System Name [ 345.637987] sis900 0000:00:01.1: DMA-API: device driver failed to check map error[device address=0x000000000d4aed02] [si ze=60 bytes] [mapped as single] [ 345.637993] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 [ 345.638022] Pid: 0, comm: swapper Not tainted 3.9.0-rc6+ #4 [ 345.638028] Call Trace: [ 345.638042] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638059] [<c102b19c>] warn_slowpath_common+0x7c/0xa0 [ 345.638070] [<c122097f>] ? check_unmap+0x4df/0x910 [ 345.638081] [<c102b23e>] warn_slowpath_fmt+0x2e/0x30 [ 345.638092] [<c122097f>] check_unmap+0x4df/0x910 [ 345.638107] [<c100bfeb>] ? save_stack_trace+0x2b/0x50 [ 345.638120] [<c107238e>] ? mark_lock+0x31e/0x5d0 [ 345.638132] [<c1072b2c>] ? __lock_acquire+0x4ec/0x7d0 [ 345.638143] [<c1220f6d>] debug_dma_unmap_page+0x6d/0x80 [ 345.638166] [<cf834dec>] sis900_interrupt+0x49c/0x860 [sis900] [ 345.638195] [<c1094b73>] handle_irq_event_percpu+0x43/0x1c0 [ 345.638206] [<c1094d1e>] ? handle_irq_event+0x2e/0x60 [ 345.638217] [<c1094d27>] handle_irq_event+0x37/0x60 [ 345.638235] [<c10973f0>] ? irq_set_chip_data+0x40/0x40 [ 345.638246] [<c1097442>] handle_level_irq+0x52/0xa0 [ 345.638251] <IRQ> [<c1003629>] ? do_IRQ+0x39/0xa0 [ 345.638293] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638347] [<d08c2c52>] ? br_flood_forward+0x12/0x20 [bridge] [ 345.638364] [<d08c2d40>] ? br_dev_queue_push_xmit+0x60/0x60 [bridge] [ 345.638381] [<d08c3b2b>] ? br_handle_frame_finish+0x25b/0x280 [bridge] [ 345.638399] [<d08c3ce3>] ? br_handle_frame+0x193/0x290 [bridge] [ 345.638416] [<d08c3b50>] ? br_handle_frame_finish+0x280/0x280 [bridge] [ 345.638431] [<c13b3c87>] ? __netif_receive_skb_core+0x1d7/0x710 [ 345.638442] [<c13b3b19>] ? __netif_receive_skb_core+0x69/0x710 [ 345.638454] [<c13b41e1>] ? __netif_receive_skb+0x21/0x70 [ 345.638464] [<c13b42b5>] ? process_backlog+0x85/0x130 [ 345.638476] [<c13b4bbb>] ? net_rx_action+0xfb/0x1d0 [ 345.638497] [<c1032768>] ? __do_softirq+0xa8/0x1f0 [ 345.638527] [<c147daad>] ? _raw_spin_unlock+0x1d/0x20 [ 345.638538] [<c10038c0>] ? handle_irq+0x20/0xd0 [ 345.638550] [<c1032f27>] ? irq_exit+0x97/0xa0 [ 345.638560] [<c1003632>] ? do_IRQ+0x42/0xa0 [ 345.638580] [<c104d003>] ? hrtimer_start+0x23/0x30 [ 345.638580] [<c1484631>] ? common_interrupt+0x31/0x36 [ 345.638580] [<c1008703>] ? default_idle+0x33/0xc0 [ 345.638580] [<c10086ac>] ? cpu_idle+0x4c/0x70 [ 345.638580] [<c14787e0>] ? rest_init+0xa0/0xb0 [ 345.638580] [<c1478740>] ? reciprocal_value+0x50/0x50 [ 345.638580] [<c16b5bcf>] ? start_kernel+0x28f/0x320 [ 345.638580] [<c16b54e0>] ? repair_env_string+0x60/0x60 [ 345.638580] [<c16b5269>] ? i386_start_kernel+0x39/0xa0 [ 345.638580] ---[ end trace a244264b69b8a7ae ]--- [ 345.638580] Mapped at: [ 345.638580] [<c1221c65>] debug_dma_map_page+0x65/0x110 [ 345.638580] [<cf8355a9>] sis900_start_xmit+0x129/0x210 [sis900] [ 345.638580] [<c13b2527>] dev_hard_start_xmit+0x1b7/0x530 [ 345.638580] [<c13cc32e>] sch_direct_xmit+0x8e/0x280 [ 345.638580] [<c13b4e39>] dev_queue_xmit+0x1a9/0x5b0 Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Ferre 提交于
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Original-idea-by: <yongjun_wei@trendmicro.com.cn> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Rapoport 提交于
The multicast and broadcast packets may have RTCF_LOCAL set in rt_flags and therefore will be sent out bypassing encapsulation. This breaks delivery of packets sent to the vxlan multicast group. Disabling encapsulation bypass for multicasts and broadcasts fixes the issue. Signed-off-by: NMike Rapoport <mike.rapoport@ravellosystems.com> Tested-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Tested-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2013 6 次提交
-
-
由 Daniel Borkmann 提交于
Commit 10b96f73 (``tcp_memcontrol: remove a redundant statement in tcp_destroy_cgroup()'') says ``We read the value but make no use of it.'', but forgot to remove the variable declaration as well. This was a follow-up commit of 3f134619 (``memcg: decrement static keys at real destroy time'') that removed the read of variable 'val'. This fixes therefore: CC net/ipv4/tcp_memcontrol.o net/ipv4/tcp_memcontrol.c: In function ‘tcp_destroy_cgroup’: net/ipv4/tcp_memcontrol.c:67:6: warning: unused variable ‘val’ [-Wunused-variable] Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Currently, sock_tx_timestamp() always returns 0. The comment that describes the sock_tx_timestamp() function wrongly says that it returns an error when an invalid argument is passed (from commit 20d49473, ``net: socket infrastructure for SO_TIMESTAMPING''). Make the function void, so that we can also remove all the unneeded if conditions that check for such a _non-existant_ error case in the output path. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Rapoport 提交于
Currently "bridge fdb show dev vxlan0" lists loopback address as "1.0.0.127". Using htonl(INADDR_LOOPBACK) rather than passing it directly to vxlan_snoop fixes the problem. Signed-off-by: NMike Rapoport <mike.rapoport@ravellosystems.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Remove unnecessary macros that duplicate generic kernel functions. When a struct net_device is available: Convert printks to netdev_<level> Convert netif_msg_<foo> and ugeth_<level> to netif_<level> Add pr_fmt. Standardize on newlines at end of format. Remove some duplicated newlines from output. Coalesce formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use a more current logging style. Convert pr_<level> to netdev_<level> when a struct net_device is available. Add pr_fmt and neaten other formats too. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use a more current logging message style. Convert the printks where a struct net_device is available to netdev_<level>. Convert the other printks to pr_<level> and add pr_fmt where appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2013 2 次提交
-
-
由 Eric Dumazet 提交于
We can move th->check computation out of the loop, as compiler doesn't know each skb initially share same tcp headers after skb_segment() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
Currently when booting a mx6 device we get the following on boot: registered PHC device on eth%d Fix it by printing the network device name only after it gets registered, so that the following can be read now: fec 2188000.ethernet eth0: registered PHC device 0 Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-