Make epca fail on initialization failure instead of panic.

Cc: "Digi International, Inc" <Eng.Linux@digi.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Acked-by: NScott Kilau <scottk@digi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If RAM disk driver initialization fails due to blk_alloc_queue() faulure, the
gendisk structs stored in rd_disks[] will not be freed completely.

This patch resolves that memory leak case by doing alloc_disk() and
blk_alloc_queue() at the same time.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lockdep doesn't like to enable interrupts when they are enabled already.

BUG: warning at kernel/lockdep.c:1814/trace_hardirqs_on() (Not tainted)
 [<c04051ed>] show_trace_log_lvl+0x58/0x16a
 [<c04057fa>] show_trace+0xd/0x10
 [<c0405913>] dump_stack+0x19/0x1b
 [<c043abfb>] trace_hardirqs_on+0xa2/0x11e
 [<c041463c>] apm_bios_call_simple+0xcd/0xfd
 [<c0415242>] apm+0x92/0x5b1
 [<c0402005>] kernel_thread_helper+0x5/0xb
DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
Leftover inexact backtrace:
 [<c04057fa>] show_trace+0xd/0x10
 [<c0405913>] dump_stack+0x19/0x1b
 [<c043abfb>] trace_hardirqs_on+0xa2/0x11e
 [<c041463c>] apm_bios_call_simple+0xcd/0xfd
 [<c0415242>] apm+0x92/0x5b1
 [<c0402005>] kernel_thread_helper+0x5/0xb
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With 64-bit resources on 32-bit platforms, the resource address might be
larger than a void*.  Fix printk to work regardless of resource size.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Handle errors thrown in disk_sysfs_symlinks(), and propagate back to
caller.

The callers and associated functions don't do a real good job of handling
kobject errors anyway (add_partition, register_disk, rescan_partitions), so
this should do until something better comes along.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When IO error happens on metadata buffer, buffer is freed from memory and
later fsync() is called, filesystems like ext2 fail to report EIO.  We

solve the problem by introducing a pointer to associated address space into
the buffer_head.  When a buffer is removed from a list of metadata buffers
associated with an address space, IO error is transferred from the buffer to
the address space, so that fsync can later report it.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later.  That error status is not currently
propagated back.

So:
  Change nlm_fopen to return nlm error codes (rather than a private
  protocol) and define a new nlm_drop_reply code.
  Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
  when this error comes back.
  Cause svc_process to drop a request which returns a status of
  rpc_drop_reply.

[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When an nfs server shuts down, lockd needs to release all the locks even
though the client still holds them.

It should therefore not 'unmonitor' the clients, so that the files in nfs/sm
will still be there when the nfs server restarts, so that those clients will
be told to reclaim their locks.

However the hosts are fully unmonitored, so statd may well remove the files.

lockd has a test for 'sm_sticky' and avoid the unmonitor call if it is set,
but it is currently not set.

So set it when tearing down lockd.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Coverity noticed that the error handling code in the NFSv4 callback client
sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL
pointer.

Coverity: #cid 1397
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We weren't actually checking for SHARE_ACCESS_WRITE, with the result that the
owner could open a non-writeable file for write!

Continue to allow DENY_WRITE only with write access.

Thanks to Jim Rees for reporting the bug.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a client creates a file using an open which sets the mode to 000, or if a
chmod changes permissions after a file is opened, then situations may arise
where an NFS client knows that some IO is permitted (because a process holds
the file open), but the NFS server does not (because it doesn't know about the
open, and only sees that the IO conflicts with the current mode of the file).

As a hack to solve this problem, NFS servers normally allow the owner to
override permissions on IO.  The client can still enforce correct
permissions-checking on open by performing an explicit access check.

In NFSv4 the client can rely on the explicit on-the-wire open instead of an
access check.

Therefore we should not be allowing the owner to override permissions on an
over-the-wire open!

However, we should still allow the owner to override permissions in the case
where the client is claiming an open that it already made either before a
reboot, or while it was holding a delegation.

Thanks to Jim Rees for reporting the bug.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no locking for ->d_revalidate, so fuse_dentry_revalidate() should use
dget_parent() instead of simply dereferencing ->d_parent.

Due to topology changes in the directory tree the parent could become negative
or be destroyed while being used.  There hasn't been any reports about this
yet.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse considered it an error (EIO) if lookup returned a directory inode, to
which a dentry already refered.  This is because directory aliases are not
allowed.

But in a network filesystem this could happen legitimately, if a directory is
moved on a remote client.  This patch attempts to relax the restriction by
trying to first evict the offending alias from the cache.  If this fails, it
still returns an error (EBUSY).

A rarer situation is if an mkdir races with an indenpendent lookup, which
finds the newly created directory already moved.  In this situation the mkdir
should return success, but that would be incorrect, since the dentry cannot be
instantiated, so return EBUSY.

Previously checking for a directory alias and instantiation of the dentry
weren't done atomically in lookup/mkdir, hence two such calls racing with each
other could create aliased directories.  To prevent this introduce a new
per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations
with a directory inode.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a spurious BUG in an unlikely race, where at least three parallel lookups
return the same inode, but with different file type.  This has not yet been
observed in real life.

Allowing unlimited retries could delay fuse_iget() indefinitely, but this is
really for the broken userspace filesystem to worry about.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An inode could be returned by independent parallel lookups, in this case an
update of the lookup counter could be lost resulting in a memory leak in
userspace.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Unless someone reads the documentation for write_seqcount_{begin,end} it is
not obvious, that i_size_write() needs locking.  Especially, that lack of such
locking can result in a system hang.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse didn't always call i_size_write() with i_mutex held which caused rare
hangs on SMP/32bit.  This bug has been present since fuse-2.2, well before
being merged into mainline.

The simplest solution is to protect i_size_write() with the per-connection
spinlock.  Using i_mutex for this purpose would require some restructuring of
the code and I'm not even sure it's always safe to acquire i_mutex in all
places i_size needs to be set.

Since most of vmtruncate is already duplicated for other reasons, duplicate
the remaining part as well, making all i_size_write() calls internal to fuse.

Using i_size_write() was unnecessary in fuse_init_inode(), since this function
is only called on a newly created locked inode.

Reported by a few people over the years, but special thanks to Dana Henriksen
who was persistent enough in helping me debug it.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce desc->name and eliminate the handle_irq_name() hack.  Add
set_irq_chip_and_handler_name() to set the flow type and name at once.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix this:

make[3]: *** No rule to make target
`/mnt/md0/devel/linux-git/include/linux/version.h', needed by
`/mnt/md0/devel/linux-git-obj/usr/include/linux/version.h'.  Stop.
make[2]: *** [linux] Error 2
make[1]: *** [headers_install] Error 2
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct the following bugs introduced by commit
67cc0161:

- remove one remaining and now incorrect baud_table[] usage
- "baud +=" is no longer correct

The former bug was spotted by the Coverity checker.

Rolf Eike Beer spotted a bug in the initial version of my patch.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My fancy new swsusp IO code had a big memory leak.  It's somewhat invisible
because the whole mem_map[] gets overwritten after resume, but it can cause us
to get low on memory during the actual suspend process.

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/acpi/processor_idle.c:1112: warning: 'smp_callback' defined but not used

Cc: Len Brown <lenb@kernel.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A recent change to the vmalloc() code accidentally resulted in us passing
__GFP_ZERO into the slab allocator.  But we only wanted __GFP_ZERO for the
actual pages whcih are being vmalloc()ed, and passing __GFP_ZERO into slab is
not a rational thing to ask for.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix October-only BCD-to-binary conversion bug:

	0x08 -> 7
	0x09 -> 8
	0x10 -> 15 (!)
	0x11 -> 19

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7361

Cc: Raphael Assenat <raph@raphnet.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove dependency of w1 subsytem from connector, only w1_con must depend on
it.  With attached patch applied to vanilla 2.6.19-git things works fine.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: <dmb@pochta.ru>
Cc: Greg KH <greg@kroah.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Adrian Bunk <bunk@stusta.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to encode a decode the 'file' part of a handle.  We simply use the
inode number and generation number to construct the filehandle.

The generation number is the time when the file was created.  As inode numbers
cycle through the full 32 bits before being reused, there is no real chance of
the same inum being allocated to different files in the same second so this is
suitably unique.  Using time-of-day rather than e.g.  jiffies makes it less
likely that the same filehandle can be created after a reboot.

In order to be able to decode a filehandle we need to be able to lookup by
inum, which means that the inode needs to be added to the inode hash table
(tmpfs doesn't currently hash inodes as there is never a need to lookup by
inum).  To avoid overhead when not exporting, we only hash an inode when it is
first exported.  This requires a lock to ensure it isn't hashed twice.

This code is separate from the patch posted in June06 from Atal Shargorodsky
which provided the same functionality, but does borrow slightly from it.

Locking comment: Most filesystems that hash their inodes do so at the point
where the 'struct inode' is initialised, and that has suitable locking
(I_NEW).  Here in shmem, we are hashing the inode later, the first time we
need an NFS file handle for it.  We no longer have I_NEW to ensure only one
thread tries to add it to the hash table.

Cc: Atal Shargorodsky <atal@codefidence.com>
Cc: Gilad Ben-Yossef <gilad@codefidence.com>
Signed-off-by: NDavid M. Grimes <dgrimes@navisite.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This library function should be in obj-y and not in lib-y.  But when we do
that it clashes unpleasantly with the assembly-language implementation in the
ia64 architecture.

Instead of trying to fix it all up, just remove the generic carta_random32 in
the expectation that the recently-made-generic random32() will suffice.

If/when perfmon is migrated to random32, ia64's private carta_random32
implementation can also be removed.

Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make net_random() more widely available by calling it random32

akpm: hopefully this will permit the removal of carta_random32.  That needs
confirmation from Stephane - this code looks somewhat more computationally
expensive, and has a different (ie: callee-stateful) interface.

[akpm@osdl.org: lots of build fixes, cleanups]
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Actually, the decimal representation of a 32-bit signed number can take 12
bytes, including the \0.

And then some code adds a \n as well, so let's give it 13 bytes.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The integer divisions in the timer accounting code can round the result
down to 0.  Adding 0 is without effect and the signal delivery stops.

Clamp the division result to minimum 1 to avoid this.

Problem was reported by Seongbae Park <spark@google.com>, who provided
also an inital patch.

Roland sayeth:

  I have had some more time to think about the problem, and to reproduce it
  using Toyo's test case.  For the record, if my understanding of the problem
  is correct, this happens only in one very particular case.  First, the
  expiry time has to be so soon that in cputime_t units (usually 1s/HZ ticks)
  it's < nthreads so the division yields zero.  Second, it only affects each
  thread that is so new that its CPU time accumulation is zero so now+0 is
  still zero and ->it_*_expires winds up staying zero.  For the VIRT and PROF
  clocks when cputime_t is tick granularity (or the SCHED clock on
  configurations where sched_clock's value only advances on clock ticks), this
  is not hard to arrange with new threads starting up and blocking before they
  accumulate a whole tick of CPU time.  That's what happens in Toyo's test
  case.

  Note that in general it is fine for that division to round down to zero,
  and set each thread's expiry time to its "now" time.  The problem only
  arises with thread's whose "now" value is still zero, so that now+0 winds up
  0 and is interpreted as "not set" instead of ">= now".  So it would be a
  sufficient and more precise fix to just use max(ticks, 1) inside the loop
  when setting each it_*_expires value.

  But, it does no harm to round the division up to one and always advance
  every thread's expiry time.  If the thread didn't already fire timers for
  the expiry time of "now", there is no expectation that it will do so before
  the next tick anyway.  So I followed Thomas's patch in lifting the max out
  of the loops.

  This patch also covers the reload cases, which are harder to write a test
  for (and I didn't try).  I've tested it with Toyo's case and it fixes that.

[toyoa@mvista.com: fix: min_t -> max_t]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Seongbae Park <spark@google.com>
Cc: Peter Mattis <pmattis@google.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have seen mdadm oops after successfully unloading md module.

This patch privents from unloading md module while
mdadm is polling /proc/mdstat.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAkinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If remove_mapping() failed to remove the page from its mapping, don't go and
mark it not uptodate!  Makes kernel go dead.

(Actually, I don't think the ClearPageUptodate is needed there at all).

Says Nick Piggin:

   "Right, it isn't needed because at this point the page is guaranteed
    by remove_mapping to have no references (except us) and cannot pick
    up any new ones because it is removed from pagecache.

    We can delete it."
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is Eric Sesterhenn's jbd patch applied to jbd2.
Commit: 41716c7c

His words:

Since commit d1807793 we dereference a NULL
pointer.  Coverity id #1432.  We set journal to NULL, and use it directly
afterwards.
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid possible PIT livelock issues seen on SMP systems (and reported by
Andi), by not allowing it as a clocksource on SMP boxes.

However, since the PIT may no longer be present, we have to properly handle
the cases where SMP systems have TSC skew and fall back from the TSC.
Since the PIT isn't there, it would "fall back" to the TSC again.  So this
changes the jiffies rating to 1, and the TSC-bad rating value to 0.

Thus you will get the following behavior priority on i386 systems:

tsc		[if present & stable]
hpet		[if present]
cyclone		[if present]
acpi_pm		[if present]
pit		[if UP]
jiffies

Rather then the current more complicated:
tsc		[if present & stable]
hpet		[if present]
cyclone		[if present]
acpi_pm		[if present]
pit		[if cpus < 4]
tsc		[if present & unstable]
jiffies
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I will be taking over after Russell King as the new maintainer of the
MMC layer.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In general, lockdep warnings are intended to be non-fatal, so I have put in
various practical limits on internal data structure failure modes.  We haven't
had a /single/ lockdep-internal crash ever since lockdep went upstream [the
unwinder crashes are outside of lockdep], and that's largely due to the good
internal checks it does.

Recursion within the dependency graph is currently limited to 20, that's
probably not enough on some many-CPU boxes - this patch doubles it to 40.  I
have written the lockdep functions to have as small stackframes as possible,
so 40 should be OK too.  (The practical recursion limit should be somewhere
between 100 and 200 entries.  If we hit that then I'll change the algorithm to
be iteration-based.  Graph walking logic is so easy to program via recursion,
so i'd like to keep recursion as long as possible.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove reference to PAGE_SIZE that causes errors if PAGE_SIZE != 4096
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>