- 19 12月, 2013 8 次提交
-
-
由 Christoph Hellwig 提交于
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
We might not have read in the extent list at this point, so make sure we take the ilock exclusively if we have to do so. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Ben Myers 提交于
Although it was removed in commit 051e7cd4, ilock needs to be taken in xfs_readdir because we might have to read the extent list in from disk. This keeps other threads from reading from or writing to the extent list while it is being read in and is still in a transitional state. This has been associated with "Access to block zero" messages on directories with large numbers of extents resulting from excessive filesytem fragmentation, as well as extent list corruption. Unfortunately no test case at this point. Signed-off-by: NBen Myers <bpm@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Equivalent to xfs_ilock_data_map_shared, except for the attribute fork. Make xfs_getbmap use it if called for the attribute fork instead of xfs_ilock_data_map_shared. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Make it clear that we're only locking against the extent map on the data fork. Also clean the function up a little bit. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
We can just use xfs_iunlock without any loss of clarity. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Both the inode number and the generation do not change on a live inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 12 12月, 2013 4 次提交
-
-
由 Dave Chinner 提交于
The function xfs_bmap_isaeof() is used to indicate that an allocation is occurring at or past the end of file, and as such should be aligned to the underlying storage geometry if possible. Commit 27a3f8f2 ("xfs: introduce xfs_bmap_last_extent") changed the behaviour of this function for empty files - it turned off allocation alignment for this case accidentally. Hence large initial allocations from direct IO are not getting correctly aligned to the underlying geometry, and that is cause write performance to drop in alignment sensitive configurations. Fix it by considering allocation into empty files as requiring aligned allocation again. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Ben Myers 提交于
rec.ir_startino is an agino rather than an ino. Use the correct macro when dealing with it in xfs_difree. Signed-off-by: NBen Myers <bpm@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Namjae Jeon 提交于
When I tried to send the patches to XFS Maintainers, I got returned mail included delivery fail message for Dave's mail. Maybe, Dave Chinner mail address is incorrect. I try to fix it correctly. Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
If we are using a large directory block size, and memory becomes fragmented, we can get memory allocation failures trying to kmem_alloc(64k) for a temporary buffer. However, there is not need for a directory buffer sized allocation, as the end result ends up in the inode literal area. This is, at most, slightly less than 2k of space, and hence we don't need an allocation larger than that fora temporary buffer. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 10 12月, 2013 2 次提交
-
-
由 Jie Liu 提交于
xfs_quota(8) will hang up if trying to turn group/project quota off before the user quota is off, this could be 100% reproduced by: # mount -ouquota,gquota /dev/sda7 /xfs # mkdir /xfs/test # xfs_quota -xc 'off -g' /xfs <-- hangs up # echo w > /proc/sysrq-trigger # dmesg SysRq : Show Blocked State task PC stack pid father xfs_quota D 0000000000000000 0 27574 2551 0x00000000 [snip] Call Trace: [<ffffffff81aaa21d>] schedule+0xad/0xc0 [<ffffffff81aa327e>] schedule_timeout+0x35e/0x3c0 [<ffffffff8114b506>] ? mark_held_locks+0x176/0x1c0 [<ffffffff810ad6c0>] ? call_timer_fn+0x2c0/0x2c0 [<ffffffffa0c25380>] ? xfs_qm_shrink_count+0x30/0x30 [xfs] [<ffffffff81aa3306>] schedule_timeout_uninterruptible+0x26/0x30 [<ffffffffa0c26155>] xfs_qm_dquot_walk+0x235/0x260 [xfs] [<ffffffffa0c059d8>] ? xfs_perag_get+0x1d8/0x2d0 [xfs] [<ffffffffa0c05805>] ? xfs_perag_get+0x5/0x2d0 [xfs] [<ffffffffa0b7707e>] ? xfs_inode_ag_iterator+0xae/0xf0 [xfs] [<ffffffffa0c22280>] ? xfs_trans_free_dqinfo+0x50/0x50 [xfs] [<ffffffffa0b7709f>] ? xfs_inode_ag_iterator+0xcf/0xf0 [xfs] [<ffffffffa0c261e6>] xfs_qm_dqpurge_all+0x66/0xb0 [xfs] [<ffffffffa0c2497a>] xfs_qm_scall_quotaoff+0x20a/0x5f0 [xfs] [<ffffffffa0c2b8f6>] xfs_fs_set_xstate+0x136/0x180 [xfs] [<ffffffff8136cf7a>] do_quotactl+0x53a/0x6b0 [<ffffffff812fba4b>] ? iput+0x5b/0x90 [<ffffffff8136d257>] SyS_quotactl+0x167/0x1d0 [<ffffffff814cf2ee>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81abcd19>] system_call_fastpath+0x16/0x1b It's fine if we turn user quota off at first, then turn off other kind of quotas if they are enabled since the group/project dquot refcount is decreased to zero once the user quota if off. Otherwise, those dquots refcount is non-zero due to the user dquot might refer to them as hint(s). Hence, above operation cause an infinite loop at xfs_qm_dquot_walk() while trying to purge dquot cache. This problem has been around since Linux 3.4, it was introduced by: [ b84a3a96 xfs: remove the per-filesystem list of dquots ] Originally we will release the group dquot pointers because the user dquots maybe carrying around as a hint via xfs_qm_detach_gdquots(). However, with above change, there is no such work to be done before purging group/project dquot cache. In order to solve this problem, this patch introduces a special routine xfs_qm_dqpurge_hints(), and it would release the group/project dquot pointers the user dquots maybe carrying around as a hint, and then it will proceed to purge the user dquot cache if requested. Cc: stable@vger.kernel.org Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
For CRC enabled v5 super block, change a file's ownership can simply trigger an ASSERT failure at xfs_setattr_nonsize() if both group and project quota are enabled, i.e, [ 305.337609] XFS: Assertion failed: !XFS_IS_PQUOTA_ON(mp), file: fs/xfs/xfs_iops.c, line: 621 [ 305.339250] Kernel BUG at ffffffffa0a7fa32 [verbose debug info unavailable] [ 305.383939] Call Trace: [ 305.385536] [<ffffffffa0a7d95a>] xfs_setattr_nonsize+0x69a/0x720 [xfs] [ 305.387142] [<ffffffffa0a7dea9>] xfs_vn_setattr+0x29/0x70 [xfs] [ 305.388727] [<ffffffff811ca388>] notify_change+0x1a8/0x350 [ 305.390298] [<ffffffff811ac39d>] chown_common+0xfd/0x110 [ 305.391868] [<ffffffff811ad6bf>] SyS_fchownat+0xaf/0x110 [ 305.393440] [<ffffffff811ad760>] SyS_lchown+0x20/0x30 [ 305.394995] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f [ 305.399870] RIP [<ffffffffa0a7fa32>] assfail+0x22/0x30 [xfs] This fix adjust the assertion to check if the super block support both quota inodes or not. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 07 12月, 2013 5 次提交
-
-
由 Christoph Hellwig 提交于
Split out a xfs_setattr_time helper to share code between truncate and regular setattr similar to xfs_setattr_mode. I might also have another caller growing for this in the near future. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Remove the pointless tp argument, and properly align the local variable declarations. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
After the previous fix, there still has another ASSERT failure if turning off any type of quota while fsstress is running at the same time. Backtrace in this case: [ 50.867897] XFS: Assertion failed: XFS_IS_GQUOTA_ON(mp), file: fs/xfs/xfs_qm.c, line: 2118 [ 50.867924] ------------[ cut here ]------------ ... <snip> [ 50.867957] Kernel BUG at ffffffffa0b55a32 [verbose debug info unavailable] [ 50.867999] invalid opcode: 0000 [#1] SMP [ 50.869407] Call Trace: [ 50.869446] [<ffffffffa0bc408a>] xfs_qm_vop_create_dqattach+0x19a/0x2d0 [xfs] [ 50.869512] [<ffffffffa0b9cc45>] xfs_create+0x5c5/0x6a0 [xfs] [ 50.869564] [<ffffffffa0b5307c>] xfs_vn_mknod+0xac/0x1d0 [xfs] [ 50.869615] [<ffffffffa0b531d6>] xfs_vn_mkdir+0x16/0x20 [xfs] [ 50.869655] [<ffffffff811becd5>] vfs_mkdir+0x95/0x130 [ 50.869689] [<ffffffff811bf63a>] SyS_mkdirat+0xaa/0xe0 [ 50.869723] [<ffffffff811bf689>] SyS_mkdir+0x19/0x20 [ 50.869757] [<ffffffff8170f7dd>] system_call_fastpath+0x1a/0x1f [ 50.869793] Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 <snip> [ 50.870003] RIP [<ffffffffa0b55a32>] assfail+0x22/0x30 [xfs] [ 50.870050] RSP <ffff88002941fd60> [ 50.879251] ---[ end trace c93a2b342341c65b ]--- We're hitting the ASSERT(XFS_IS_*QUOTA_ON(mp)) in xfs_qm_vop_create_dqattach(), however the assertion itself is not right IMHO. While performing quota off, we firstly clear the XFS_*QUOTA_ACTIVE bit(s) from struct xfs_mount without taking any special locks, see xfs_qm_scall_quotaoff(). Hence there is no guarantee that the desired quota is still active. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
The xfs_quota_priv header file is only included by xfs_qm header and there is no much users for its contents, hence we can move those stuff to xfs_qm header file and kill it. This patch also remove an unused macro DQFLAGTO_TYPESTR. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Jie Liu 提交于
In xfs_qm_scall_trunc_qfiles(), we ignore the error if failed to remove the users quota metadata and proceed to remove groups and projects if they are being there. However, in user space, the remove operation will break and return if failed to remove any kind of quota. Also for v5 super block, we can enabled both group and project quota at the same time, in this case the current error handling will cover the group error with projects but they might failed due to different reasons. It seems we'd better the error handling consistent to the user space and don't trying to remove another kind of quota metadata if the previous operation is failed. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 06 12月, 2013 4 次提交
-
-
由 Mark Tinguely 提交于
Fix the leak of kernel memory in xfs_dir2_node_removename() when xfs_dir2_leafn_remove() returns an error code. Signed-off-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Mark Tinguely 提交于
Recovery builds a list of items on the transaction's r_itemq head. Normally these items are committed and freed. But in the event of a recovery error, these allocations are leaked. If the error occurs during item reordering, then reconstruct the r_itemq list before deleting the list to avoid leaking the entries that were on one of the temporary lists. Signed-off-by: NMark Tinguely <tinguely@sgi.com> Reviewed-by: NBen Myers <bpm@sgi.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Currently notify_change directly updates i_version for size updates, which not only is counter to how all other fields are updated through struct iattr, but also breaks XFS, which need inode updates to happen under its own lock, and synchronized to the structure that gets written to the log. Remove the update in the common code, and it to btrfs and ext4, XFS already does a proper updaste internally and currently gets a double update with the existing code. IMHO this is 3.13 and -stable material and should go in through the XFS tree. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAndreas Dilger <adilger@dilger.ca> Acked-by: NJan Kara <jack@suse.cz> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChris Mason <clm@fb.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dave Chinner 提交于
This loop in xfs_growfs_data_private() is incorrect for V4 superblocks filesystems: for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++) agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK); For V4 filesystems, we don't have a agfl header structure, and so XFS_AGFL_SIZE() returns an entire sector's worth of entries, which we then index from an offset into the sector. Hence: buffer overrun. This problem was introduced in 3.10 by commit 77c95bba ("xfs: add CRC checks to the AGFL") which changed the AGFL structure but failed to update the growfs code to handle the different structures. Fix it by using the correct offset into the buffer for both V4 and V5 filesystems. Cc: <stable@vger.kernel.org> Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NJie Liu <jeff.liu@oracle.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 05 12月, 2013 5 次提交
-
-
由 Jie Liu 提交于
For discard operation, we should return EINVAL if the given range length is less than a block size, otherwise it will go through the file system to discard data blocks as the end range might be evaluated to -1, e.g, # fstrim -v -o 0 -l 100 /xfs7 /xfs7: 9811378176 bytes were trimmed This issue can be triggered via xfstests/generic/288. Also, it seems to get the request queue pointer via bdev_get_queue() instead of the hard code pointer dereference is not a bad thing. Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Dan Carpenter 提交于
If we allocate less than sizeof(struct attrlist) then we end up corrupting memory or doing a ZERO_PTR_SIZE dereference. This can only be triggered with CAP_SYS_ADMIN. Reported-by: NNico Golde <nico@ngolde.de> Reported-by: NFabian Yamaguchi <fabs@goesec.de> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@redhat.com.> Signed-off-by: NBen Myers <bpm@sgi.com>
-
由 Eric Sandeen 提交于
The "verbose" argument to xfs_setsize_buftarg_flags() has been unused since: ffe37436 xfs: stop using the page cache to back the buffer cache Remove it, and fold the function into xfs_setsize_buftarg() now that there's no need for different types of callers. Fix inconsistent comment spacing while we're at it. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 30 11月, 2013 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64由 Linus Torvalds 提交于
Pull ARM64 fixes from Catalin Marinas: - Remove preempt_count modifications in the arm64 IRQ handling code since that's already dealt with in generic irq_enter/irq_exit - PTE_PROT_NONE bit moved higher up to avoid overlapping with the hardware bits (for PROT_NONE mappings which are pte_present) - Big-endian fixes for ptrace support - Asynchronous aborts unmasking while in the kernel - pgprot_writecombine() change to create Normal NonCacheable memory rather than Device GRE * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Move PTE_PROT_NONE higher up arm64: Use Normal NonCacheable memory for writecombine arm64: debug: make aarch32 bkpt checking endian clean arm64: ptrace: fix compat registes get/set to be endian clean arm64: Unmask asynchronous aborts when in kernel mode arm64: dts: Reserve the memory used for secondary CPU release address arm64: let the core code deal with preempt_count
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "One performance improvement and a few bug fixes. Two of the fixes deal with the clock related problems we have seen on recent kernels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: handle asce-type exceptions as normal page fault s390,time: revert direct ktime path for s390 clockevent device s390/time,vdso: convert to the new update_vsyscall interface s390/uaccess: add missing page table walk range check s390/mm: optimize copy_page s390/dasd: validate request size before building CCW/TCW request s390/signal: always restore saved runtime instrumentation psw bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Some easy but needed fixes for i2c drivers since rc1" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm2835: Linking platform nodes to adapter nodes i2c: omap: raw read and write endian fix i2c: i2c-bcm-kona: Fix module build i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C i2c: bcm-kona: remove duplicated include i2c: davinci: raw read and write endian fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fixes from Tejun Heo: "This contains one important fix. The NUMA support added a while back broke ordering guarantees on ordered workqueues. It was enforced by having single frontend interface with @max_active == 1 but the NUMA support puts multiple interfaces on unbound workqueues on NUMA machines thus breaking the ordered guarantee. This is fixed by disabling NUMA support on ordered workqueues. The above and a couple other patches were sitting in for-3.12-fixes but I forgot to push that out, so they ended up waiting a bit too long. My aplogies. Other fixes are minor" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues workqueue: fix comment typo for __queue_work() workqueue: fix ordered workqueues in NUMA setups workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "libata device removal path was removing parent device node before its child, which is mostly harmless but triggers warning after recent sysfs changes. Rafael's patch fixes the order. Other than that, minor controller-specific fixes and device ID additions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ATA: Fix port removal ordering ahci: add Marvell 9230 to the AHCI PCI device list ata: fix acpi_bus_get_device() return value check pata_arasan_cf: add missing clk_disable_unprepare() on error path ahci: add support for IBM Akebono platform device
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Fixes for three issues. - cgroup destruction path could swamp system_wq possibly leading to deadlock. This actually seems to happen in the wild with memcg because memcg destruction path adds nested dependency on system_wq. Resolved by isolating cgroup destruction work items on its dedicated workqueue. - Possible locking context deadlock through seqcount reported by lockdep - Memory leak under certain conditions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix cgroup_subsys_state leak for seq_files cpuset: Fix memory allocator deadlock cgroup: use a dedicated workqueue for cgroup destruction
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Quite a few HD-Audio fixes, a WUSB audio fix and a fix for FireWire audio. The HD-audio part contains a couple of fixes for the generic parser, and these are the only intrusive fixes. The rest are mostly device-specific fixes" * tag 'sound-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add LFE chmap to ASUS ET2700 ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700 ALSA: hda - limit mic boost on Asus UX31[A,E] ALSA: hda - Check leaf nodes to find aamix amps ALSA: hda - Fix hp-mic mode without VREF bits ALSA: hda - Create Headhpone Mic Jack Mode when really needed ALSA: usb: use multiple packets per urb for Wireless USB inbound audio ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Conexant codec ALSA: hda - Drop bus->avoid_link_reset flag ALSA: hda/realtek - Set pcbeep amp for ALC668 ALSA: hda/realtek - Add support of ALC231 codec ALSA: firewire-lib: fix wrong value for FDF field as an empty packet
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs dentry reference count fix from Al Viro. This fixes a possible inode_permission NULL pointer dereference (and other problems) that were due to the root dentry count being decremented too much. In commit 48a066e7 ("RCU'd vfsmounts") the placement of clearing the LOOKUP_RCU bit changed, and we then returned failure of incrementing the lockref on the parent dentry with LOOKUP_RCU cleared. But that meant we needed to go through the same cleanup routines that the later failures did wrt LOOKUP_ROOT and nd->root. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix bogus path_put() of nd->root after some unlazy_walk() failures
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm qxl leak fix from Dave Airlie: "As usual 5 mins after I send a trivial pull fix I find a real bug! This fixes a memory leak and I'd like to get it into stable queue asap" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/qxl: fix memory leak in release list handling
-
- 29 11月, 2013 2 次提交
-
-
由 Catalin Marinas 提交于
PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by: NSteve Capper <steve.capper@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Tested-by: NSteve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> # 3.11+
-
由 Catalin Marinas 提交于
This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-