- 25 2月, 2014 2 次提交
-
-
由 Sergei Shtylyov 提交于
Define the Lager board dependent part of the Ether device node. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Sergei Shtylyov 提交于
Define the generic R8A7790 part of the Ether device node. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 18 2月, 2014 4 次提交
-
-
由 Wolfram Sang 提交于
Activate the shiny new riic driver for i2c2. Tested by accessing the eeprom on the genmai board. Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: resolved conflict] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 17 2月, 2014 5 次提交
-
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
These values are inherited, so don't need to be specified again. Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Wolfram Sang 提交于
These values are inherited, so don't need to be specified again. Signed-off-by: NWolfram Sang <wsa@sang-engineering.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The DU device has no DT bindings yet, instantiate it as a platform device for now. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NMagnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: broken out of larger patch that included board changes] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The DU device has no DT bindings yet, instantiate it as a platform device for now. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NMagnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: broken out of larger patch that included board changes] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 13 2月, 2014 4 次提交
-
-
由 Geert Uytterhoeven 提交于
"ARM: shmobile: r8a7778: add I2C support on DTSI" was applied twice: commit ae4273ec commit 3acb51b9Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Add pinctrl and SPI devices for QSPI on Lager. Add Spansion s25fl512s SPI FLASH and MTD partitions. Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 06 2月, 2014 3 次提交
-
-
由 Geert Uytterhoeven 提交于
Add pinctrl and SPI devices for QSPI on Koelsch. Add Spansion s25fl512s SPI FLASH and MTD partitions. Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 04 2月, 2014 17 次提交
-
-
由 Laurent Pinchart 提交于
Replace the hardcoded value 4 with IRQ_TYPE_LEVEL_HIGH. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Remove the -generic suffix that has been added by mistake from the serial port compatible strings. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Valentine Barshak 提交于
This enables SATA1 in Lager device tree. SATA0 is not available on Lager since its pinmux is fixed to USB3.0. Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Valentine Barshak 提交于
This adds SATA[01] device nodes to r8a7790.dtsi Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Valentine Barshak 提交于
This enables SATA0 in Koelsch device tree. SATA1 is not available on Koelsch since its pinmux configuration is fixed to PCIe. Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Valentine Barshak 提交于
This adds SATA[01] device nodes to r8a7791.dtsi. Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: NValentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The platform code serial port instantiation mechanism is kept for the non-DT platforms only. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Add all serial ports marked as disabled. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Add the missing thermal MSTP clock to the thermal device node. Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
Add the missing thermal MSTP clock to the thermal device node. Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Takashi Yoshii 提交于
Fix dts to have memory 1GiB @ 0_4000_0000 + 1GiB @ 2_0000_0000 according to Koelsch's hardware manual. Signed-off-by: NTakashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The Koelsh reference device tree is going away, copy the missing GPIO keys device node to the Koeslch device tree file. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
The dts file has been superseded by r8a7791-koelsch.dts and been removed from the ARCH_SHMOBILE_LEGACY dtb target. Remove it. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 03 2月, 2014 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The three major changes in this patchset is a implementation for flexible userspace memory maps, cache-flushing fixes (again), and a long-discussed ABI change to make EWOULDBLOCK the same value as EAGAIN. parisc has been the only platform where we had EWOULDBLOCK != EAGAIN to keep HP-UX compatibility. Since we will probably never implement full HP-UX support, we prefer to drop this compatibility to make it easier for us with Linux userspace programs which mostly never checked for both values. We don't expect major fall-outs because of this change, and if we face some, we will simply rebuild the necessary applications in the debian archives" * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: add flexible mmap memory layout support parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc parisc: convert uapi/asm/stat.h to use native types only parisc: wire up sched_setattr and sched_getattr parisc: fix cache-flushing parisc/sti_console: prefer Linux fonts over built-in ROM fonts
-
由 Mikulas Patocka 提交于
HPFS needs to load 4 consecutive 512-byte sectors when accessing the directory nodes or bitmaps. We can't switch to 2048-byte block size because files are allocated in the units of 512-byte sectors. Previously, the driver would allocate a 2048-byte area using kmalloc, copy the data from four buffers to this area and eventually copy them back if they were modified. In the current implementation of the buffer cache, buffers are allocated in the pagecache. That means that 4 consecutive 512-byte buffers are stored in consecutive areas in the kernel address space. So, we don't need to allocate extra memory and copy the content of the buffers there. This patch optimizes the code to avoid copying the buffers. It checks if the four buffers are stored in contiguous memory - if they are not, it falls back to allocating a 2048-byte area and copying data there. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: NHelge Deller <deller@gmx.de>
-