- 16 8月, 2008 2 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
With gcc 4.3 and later, a pointer that has already been dereferenced is assumed not to be null since it should have caused a segmentation fault otherwise, hence any subsequent test against NULL is optimized away. Current inline asm constraint used in the implementation of prefetch() makes gcc believe that the pointer is dereferenced even though the PLD instruction does not load any data and does not cause a segmentation fault on null pointers, which causes all sorts of interesting results when reaching the end of a linked lists for example. Let's use a better constraint to properly represent the actual usage of the pointer value. Problem reported by Chris Steel. Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 8月, 2008 6 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
... otherwise these fail to build. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Paul Walmsley 提交于
Commit 2ccdd1e7 doesn't add v7wbi_possible_flags and v7wbi_always_flags to possible_tlb_flags and always_tlb_flags. This causes the L2 cache flush in clean_pmd_entry() (intended for Feroceon only) to execute on ARMv7, and the CPU hangs. This patch is required for OMAP3 boards to boot. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stefan Schmidt 提交于
Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two small whitespace issues while being there. Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Calling the undefined instruction handler functions with a spinlock held is a recipe for must_sleep() warnings. Avoid it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Fix Poodle ASoC compilation by providing Poodle LoCoMo GPIO names. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 8月, 2008 3 次提交
-
-
由 Russell King 提交于
Convert the existing dma_sync_single_for_* APIs to the new range based APIs, and make the dma_sync_single_for_* API a superset of it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
OMAP at least gets the return type(s) for the DMA translation functions wrong, which can lead to subtle errors. Avoid this by moving the DMA translation functions to asm/dma-mapping.h, and converting them to inline functions. Fix the OMAP DMA translation macros to use the correct argument and result types. Also, remove the unnecessary casts in dmabounce.c. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
-
- 09 8月, 2008 29 次提交
-
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
This patch will truncate and/or ignore memory banks if their kernel direct mappings would (partially) overlap with the vmalloc area or the mappings between the vmalloc area and the address space top, to prevent crashing during early boot if there happens to be more RAM installed than we are expecting. Since the start of the vmalloc area is not at a fixed address (but the vmalloc end address is, via the per-platform VMALLOC_END define), a default area of 128M is reserved for vmalloc mappings, which can be shrunk or enlarged by passing an appropriate vmalloc= command line option as it is done on x86. On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe000000, two 512M RAM banks and vmalloc=128M (the default), this patch gives: Truncating RAM at 20000000-3fffffff to -35ffffff (vmalloc region overlap). Memory: 512MB 352MB = 864MB total On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe800000, two 256M RAM banks and vmalloc=768M, this patch gives: Truncating RAM at 00000000-0fffffff to -0e7fffff (vmalloc region overlap). Ignoring RAM at 10000000-1fffffff (vmalloc region overlap). Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Tested-by: NRiku Voipio <riku.voipio@iki.fi>
-
由 Saeed Bishara 提交于
Signed-off-by: NSaeed Bishara <saeed@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Saeed Bishara 提交于
Signed-off-by: NSaeed Bishara <saeed@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
The QNAP TS-109/TS-209 and TS-409 devices need RTC_DRV_S35390A. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
Enable RTC_DRV_PCF8563 in the Orion defconfig since this driver is needed by the HP mv2120. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
Enable KEYBOARD_GPIO in the Orion defconfig because a number of Orion devices, such as the HP mv2120, define gpio-keys buttons. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
The reset button on the QNAP TS-409 is available through gpio. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
Use key codes for the buttons on the TS-209/TS-409 that make more sense than the current values. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NByron Bradley <byron.bbradley@gmail.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Martin Michlmayr 提交于
Export the four red SATA LEDs on the QNAP TS-409 that are connected through gpio. Since the boot loader apparently sets the SATA LEDs 2-4 to red and the SATA LED can only be red or green (but not both), exporting the red SATA LEDs (which automatically turns them off upon boot) makes the green SATA presence/activity indication visible. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NSylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
On D0 5281 SoCs, we need to disable the wait-for-interrupt instruction due to an erratum. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com> Acked-by: NMartin Michlmayr <tbm@cyrius.com>
-
-
由 Ben Dooks 提交于
Update the status of the S3C24XX GPIO now we have moved to supporting GPIOLIB Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update SD/MMC status now that the driver is merged. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update supported and in-progress cpu list. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update documentation in arch/arm/plat-s3c24xx Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
s3c_lookup_cpu is only used at init time, so make it __init. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The cats_map_irq() function in the Simtec CATS support code is mapping IRQ 255 (invalid IRQ) into what is a supposedly valid interrupt numner which can cause problems with other devices then seeing an interrupt they cannot claim. If the IRQ number if >= 255, then return -1 as this is not something we can map. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Huang Weiyi 提交于
Removed duplicated include file <linux/mtd/mtd.h> and <linux/mtd/partitions.h> in arch/arm/mach-s3c2412/mach-jive.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Krzysztof Helt 提交于
This patch fixes compilation error if no s3c2410 processor is selected but the s3c244x is selected. The function s3c2410_baseclk_add() is now available for all Samsung cpus. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> [ben-linux@fluff.org: Whitespace and description fixups] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Lennert Buytenhek 提交于
This patch performs the equivalent include directory shuffle for plat-orion, and fixes up all users. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ][2/2] preregister support for powernow-k8 [CPUFREQ][1/2] whitespace fix for powernow-k8 [CPUFREQ] Update MAINTAINERS to reflect new mailing list. [CPUFREQ] Fix warning in elanfreq [CPUFREQ] Fix -Wshadow warning in conservative governor. [CPUFREQ] Remove EXPERIMENTAL annotation from VIA C7 powersaver kconfig.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] list entry can not return null turn cifs_setattr into a multiplexor that calls the correct function move file time and dos attribute setting logic into new function spin off cifs_setattr with unix extensions to its own function [CIFS] Code cleanup in old sessionsetup code [CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg change CIFSSMBSetTimes to CIFSSMBSetPathInfo [CIFS] fix trailing whitespace bundle up Unix SET_PATH_INFO args into a struct and change name Fix missing braces in cifs_revalidate() remove locking around tcpSesAllocCount atomic variable [CIFS] properly account for new user= field in SPNEGO upcall string allocation [CIFS] remove level of indentation from decode_negTokenInit [CIFS] cifs send2 not retrying enough in some cases on full socket [CIFS] oid should also be checked against class in cifs asn
-
由 Randy Dunlap 提交于
Fix fatal multi-line kernel-doc error in list.h: function short description must be on one line. Error(linux-2.6.27-rc2-git3//include/linux/list.h:318): duplicate section name 'Description' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Mark Langsdorf 提交于
This patch provides support for the _PSD ACPI object in the Powernow-k8 driver. Although it looks like an invasive patch, most of it is simply the consequence of turning the static acpi_performance_data structure into a pointer. AMD has tested it on several machines over the past few days without issue. [trivial checkpatch warnings fixed up by davej] [X86_POWERNOW_K8_ACPI=n buildfix from Randy Dunlap] Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com> Tested-by: NFrank Arnold <frank.arnold@amd.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mark Langsdorf 提交于
Trivial whitespace fix for powernow-k8. Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
Mailing list moved to vger. Signed-off-by: NDave Jones <davej@redhat.com>
-