- 15 5月, 2019 8 次提交
-
-
由 Jérôme Glisse 提交于
Use the mmu_notifier_range_blockable() helper function instead of directly dereferencing the range->blockable field. This is done to make it easier to change the mmu_notifier range field. This patch is the outcome of the following coccinelle patch: %<------------------------------------------------------------------- @@ identifier I1, FN; @@ FN(..., struct mmu_notifier_range *I1, ...) { <... -I1->blockable +mmu_notifier_range_blockable(I1) ...> } ------------------------------------------------------------------->% spatch --in-place --sp-file blockable.spatch --dir . Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com> Reviewed-by: NRalph Campbell <rcampbell@nvidia.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Baoquan He 提交于
The input parameter 'phys_index' of memory_block_action() is actually the section number, but not the phys_index of memory_block. This is a relic from the past when one memory block could only contain one section. Rename it to start_section_nr. And also in remove_memory_section(), the 'node_id' and 'phys_device' arguments are not used by anyone. Remove them. Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.comSigned-off-by: NBaoquan He <bhe@redhat.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Reviewed-by: NOscar Salvador <osalvador@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Weiny 提交于
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS DAX pages being mapped. Link: http://lkml.kernel.org/r/20190328084422.29911-8-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-8-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Weiny 提交于
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS DAX pages being mapped. Link: http://lkml.kernel.org/r/20190328084422.29911-7-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-7-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NDan Williams <dan.j.williams@intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Weiny 提交于
Use the new FOLL_LONGTERM to get_user_pages_fast() to protect against FS DAX pages being mapped. [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-6-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-6-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-6-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Weiny 提交于
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NMike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ira Weiny 提交于
Pach series "Add FOLL_LONGTERM to GUP fast and use it". HFI1, qib, and mthca, use get_user_pages_fast() due to its performance advantages. These pages can be held for a significant time. But get_user_pages_fast() does not protect against mapping FS DAX pages. Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which retains the performance while also adding the FS DAX checks. XDP has also shown interest in using this functionality.[1] In addition we change get_user_pages() to use the new FOLL_LONGTERM flag and remove the specialized get_user_pages_longterm call. [1] https://lkml.org/lkml/2019/3/19/939 "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Secondly, it depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an aside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. This patch (of 7): This patch starts a series which aims to support FOLL_LONGTERM in get_user_pages_fast(). Some callers who would like to do a longterm (user controlled pin) of pages with the fast variant of GUP for performance purposes. Rather than have a separate get_user_pages_longterm() call, introduce FOLL_LONGTERM and change the longterm callers to use it. This patch does not change any functionality. In the short term "longterm" or user controlled pins are unsafe for Filesystems and FS DAX in particular has been blocked. However, callers of get_user_pages_fast() were not "protected". FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it requires vmas to determine if DAX is in use. NOTE: In merging with the CMA changes we opt to change the get_user_pages() call in check_and_migrate_cma_pages() to a call of __get_user_pages_locked() on the newly migrated pages. This makes the code read better in that we are calling __get_user_pages_locked() on the pages before and after a potential migration. As a side affect some of the interfaces are cleaned up but this is not the primary purpose of the series. In review[1] it was asked: <quote> > This I don't get - if you do lock down long term mappings performance > of the actual get_user_pages call shouldn't matter to start with. > > What do I miss? A couple of points. First "longterm" is a relative thing and at this point is probably a misnomer. This is really flagging a pin which is going to be given to hardware and can't move. I've thought of a couple of alternative names but I think we have to settle on if we are going to use FL_LAYOUT or something else to solve the "longterm" problem. Then I think we can change the flag to a better name. Second, It depends on how often you are registering memory. I have spoken with some RDMA users who consider MR in the performance path... For the overall application performance. I don't have the numbers as the tests for HFI1 were done a long time ago. But there was a significant advantage. Some of which is probably due to the fact that you don't have to hold mmap_sem. Finally, architecturally I think it would be good for everyone to use *_fast. There are patches submitted to the RDMA list which would allow the use of *_fast (they reworking the use of mmap_sem) and as soon as they are accepted I'll submit a patch to convert the RDMA core as well. Also to this point others are looking to use *_fast. As an asside, Jasons pointed out in my previous submission that *_fast and *_unlocked look very much the same. I agree and I think further cleanup will be coming. But I'm focused on getting the final solution for DAX at the moment. </quote> [1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965 [ira.weiny@intel.com: v3] Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.comSigned-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Williams 提交于
Starting with c6f3c5ee ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") vmf_insert_pfn_pmd() internally calls pmdp_set_access_flags(). That helper enforces a pmd aligned @address argument via VM_BUG_ON() assertion. Update the implementation to take a 'struct vm_fault' argument directly and apply the address alignment fixup internally to fix crash signatures like: kernel BUG at arch/x86/mm/pgtable.c:515! invalid opcode: 0000 [#1] SMP NOPTI CPU: 51 PID: 43713 Comm: java Tainted: G OE 4.19.35 #1 [..] RIP: 0010:pmdp_set_access_flags+0x48/0x50 [..] Call Trace: vmf_insert_pfn_pmd+0x198/0x350 dax_iomap_fault+0xe82/0x1190 ext4_dax_huge_fault+0x103/0x1f0 ? __switch_to_asm+0x40/0x70 __handle_mm_fault+0x3f6/0x1370 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 handle_mm_fault+0xda/0x200 __do_page_fault+0x249/0x4f0 do_page_fault+0x32/0x110 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 Link: http://lkml.kernel.org/r/155741946350.372037.11148198430068238140.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: c6f3c5ee ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") Signed-off-by: NDan Williams <dan.j.williams@intel.com> Reported-by: NPiotr Balcer <piotr.balcer@intel.com> Tested-by: NYan Ma <yan.ma@intel.com> Tested-by: NPankaj Gupta <pagupta@redhat.com> Reviewed-by: NMatthew Wilcox <willy@infradead.org> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 5月, 2019 11 次提交
-
-
由 Jakub Kicinski 提交于
Add missing kdoc for app member. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiong Wang 提交于
NFP shift instruction has something special. If shift direction is left then shift amount of 1 to 31 is specified as 32 minus the amount to shift. But no need to do this for indirect shift which has shift amount be 0. Even after we do this subtraction, shift amount 0 will be turned into 32 which will eventually be encoded the same as 0 because only low 5 bits are encoded, but shift amount be 32 will fail the FIELD_PREP check done later on shift mask (0x1f), due to 32 is out of mask range. Such error has been observed when compiling nfp/bpf/jit.c using gcc 8.3 + O3. This issue has started when indirect shift support added after which the incoming shift amount to __emit_shf could be 0, therefore it is at that time shift amount adjustment inside __emit_shf should have been tightened. Fixes: 991f5b36 ("nfp: bpf: support logic indirect shifts (BPF_[L|R]SH | BPF_X)") Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Pablo Cascón <pablo.cascon@netronome.com Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NJiong Wang <jiong.wang@netronome.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Kefeng Wang 提交于
drivers/net/ethernet/aquantia/atlantic/aq_drvinfo.o: In function `aq_drvinfo_init': aq_drvinfo.c:(.text+0xe8): undefined reference to `devm_hwmon_device_register_with_info' Fix it by using #if IS_REACHABLE(CONFIG_HWMON). Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
If you are using a function that does a swap in place, you cannot just reuse the buffer on the assumption that it has not been changed. Signed-off-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
When writing to the phy on BE architectures an internal data structure was directly given, leading to it being byte swapped in the wrong way for the CPU in 50% of all cases. A temporary buffer must be used. Signed-off-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
If the MTU is large enough, the first write to the device is just repeated. On BE architectures, however, the first word of the command will be swapped a second time and garbage will be written. Avoid that. Signed-off-by: NOliver Neukum <oneukum@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
Miroslav pointed that with NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on macvlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: 254c0a2b ("macvlan: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to real device") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
When a queue(tfile) is detached through __tun_detach(), we move the last enabled tfile to the position where detached one sit but don't NULL out last position. We expect to synchronize the datapath through tun->numqueues. Unfortunately, this won't work since we're lacking sufficient mechanism to order or synchronize the access to tun->numqueues. To fix this, NULL out the last position during detaching and check RCU protected tfile against NULL instead of checking tun->numqueues in datapath. Cc: YueHaibing <yuehaibing@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: weiyongjun (A) <weiyongjun1@huawei.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c8d68e6b ("tuntap: multiqueue support") Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Fixes: 96f84061("tun: add eBPF based queue selection method") Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cheng Han 提交于
net: ethernet: stmmac: dwmac4_prog_mtl_tx_algorithms() missing write operation The value of MTL_OPERATION_MODE is not written back Signed-off-by: NCheng Han <hancheng2009@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Make sure ptp dt node exists before accessing it in case of NULL pointer call trace. Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2019 21 次提交
-
-
由 Neil Armstrong 提交于
For the PWM controller in the Meson G12A SoC, the EE domain and AO domain have different clock sources. This patch tries to describe them in the DT compatible data. The two AO PWM controller has different clock source, but the first AO controller (A & B) can reuse the AXG parents name. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Uwe Kleine-König 提交于
A call to ->request() is always paired by a call to ->free() before a given device is disposed. So the simplification that usually is possible when using devm_*() functions cannot be used here. So use plain kzalloc() and kfree() for improved runtime behaviour and reduced memory footprint. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> [thierry.reding@gmail.com: fix build failure] Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Uwe Kleine-König 提交于
After a PWM is disposed by its user the per chip data becomes invalid. Clear the data in common code instead of the device drivers to get consistent behaviour. Before this patch only three of nine drivers cleaned up here. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Anson Huang 提交于
i.MX7ULP has TPM(Low Power Timer/Pulse Width Modulation Module) inside, it can support multiple PWM channels, all the channels share same counter and period setting, but each channel can configure its duty and polarity independently. There are several TPM modules in i.MX7ULP, the number of channels in TPM modules are different, it can be read from each TPM module's PARAM register. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Reviewed-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Anson Huang 提交于
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Martin Blumenstingl 提交于
Holding the spin-lock for all of the code in meson_pwm_apply() can result in a "BUG: scheduling while atomic". This can happen because clk_get_rate() (which is called from meson_pwm_calc()) may sleep. Only hold the spin-lock when modifying registers to solve this. The reason why we need a spin-lock in the driver is because the REG_MISC_AB register is shared between the two channels provided by one PWM controller. The only functions where REG_MISC_AB is modified are meson_pwm_enable() and meson_pwm_disable() so the register reads/writes in there need to be protected by the spin-lock. The original code also used the spin-lock to protect the values in struct meson_pwm_channel. This could be necessary if two consumers can use the same PWM channel. However, PWM core doesn't allow this so we don't need to protect the values in struct meson_pwm_channel with a lock. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Bichao Zheng 提交于
There is an abnormally low about 20ms,when setting duty repeatedly. Because setting the duty will disable PWM and then enable. Delete this operation now. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by: NBichao Zheng <bichao.zheng@amlogic.com> [ Dropped code instead of hiding it behind a comment ] Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Martin Blumenstingl 提交于
The pre-divider allows configuring longer PWM periods compared to using the input clock directly. The pre-divider is 7 bit wide, meaning it's maximum value is 128 (the register value is off-by-one: 0x7f or 127). Change the loop to also allow for the maximum possible value to be considered valid. Fixes: 211ed630 ("pwm: Add support for Meson PWM Controller") Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Marek Behun 提交于
This adds support for the mailbox via which the kernel can communicate with the firmware running on the secure processor of the Armada 37xx SOC. The rWTM secure processor has access to internal eFuses and cryptographic circuits, such as the Entropy Bit Generator to generate true random numbers. Signed-off-by: NMarek Behun <marek.behun@nic.cz> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Fabien Dessenne 提交于
On failure of_irq_get() returns a negative value or zero, which is not handled as an error in the existing implementation. Instead of using this API, use platform_get_irq() that returns exclusively a negative value on failure. Also, do not output an error log in case of defer probe error. Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Anson Huang 提交于
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: NAnson Huang <Anson.Huang@nxp.com> Reviewed-by: NMukesh Ojha <mojha@codeaurora.org> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Mauro Carvalho Chehab 提交于
Rename the sparc documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. There is an except from a document under oradax dir. It doesn't seem to make much sense to convert this one to ReST, so let's add it as an included document. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
After a recent chat with Dave we agreed to try to finally kill off the legacy IDE code base. Set a two year grace period in which we try to move everyone over. There are a few pieces of hardware not supported by libata yet, but for many of them we aren't even sure if there are any users. For those that have users we have usually found a volunteer to add libata support. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
NFP does not register devlink ports for representors (without the "devlink: expose PF and VF representors as ports" series there are no port flavours to expose them as). Commit c25f08ac ("nfp: remove ndo_get_port_parent_id implementation") went to far in removing ndo_get_port_parent_id for representors. This causes redirection offloads to fail, and switch_id attribute missing. Reintroduce the ndo_get_port_parent_id callback for representor ports. Fixes: c25f08ac ("nfp: remove ndo_get_port_parent_id implementation") Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Serge Semin 提交于
It's prone to problems if delay is cleared out for other than RGMII modes. So lets set/clear the TX-delay in the config register only if actually RGMII-like interface mode is requested. This only concerns rtl8211f chips. Signed-off-by: NSerge Semin <fancer.lancer@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Serge Semin 提交于
There are two chip pins named TXDLY and RXDLY which actually adds the 2ns delays to TXC and RXC for TXD/RXD latching. Alas this is the only documented info regarding the RGMII timing control configurations the PHY provides. It turns out the same settings can be setup via MDIO registers hidden in the extension pages layout. Particularly the extension page 0xa4 provides a register 0x1c, which bits 1 and 2 control the described delays. They are used to implement the "rgmii-{id,rxid,txid}" phy-mode. The hidden RGMII configs register utilization was found in the rtl8211e U-boot driver: https://elixir.bootlin.com/u-boot/v2019.01/source/drivers/net/phy/realtek.c#L99 There is also a freebsd-folks discussion regarding this register: https://reviews.freebsd.org/D13591 It confirms that the register bits field must control the so called configuration pins described in the table 12-13 of the official PHY datasheet: 8:6 = PHY Address 5:4 = Auto-Negotiation 3 = Interface Mode Select 2 = RX Delay 1 = TX Delay 0 = SELRGV Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NSerge Semin <fancer.lancer@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
This provides a new input driver for supporting the power button on Basin Cove PMIC, found on Intel Merrifield-based devices. The driver follows the design used in intel_chtdc_ti_pwrbtn.c module. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Chris Chiu 提交于
Some of latest ASUS laptops support new fn-lock mode switching. This commit detect whether if the fn-lock option is enabled in BIOS setting, and toggle the fn-lock mode via a new WMI DEVID 0x00100023 when the corresponding notify code captured. The ASUS fn-lock mode switch is activated by pressing Fn+Esc. When on, keys F1 to F12 behave as applicable, with meanings defined by the application being used at the time. When off, F1 to F12 directly triggers hardware features, well known audio volume up/down, brightness up/down...etc, which were triggered by holding down Fn key and F-keys. Because there's no way to retrieve the fn-lock mode via existing WMI methods per ASUS spec, driver need to initialize and keep the fn-lock mode by itself. Signed-off-by: NChris Chiu <chiu@endlessm.com> Reviewed-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Hans de Goede 提交于
When the ideapad-laptop driver was first written it was written for laptops which had a hardware rfkill switch. So when the first ideapad laptops showed up without a hw rfkill switch and it turned out that in this case the ideapad firmware interface would always report the wifi being hardware- blocked, a DMI id list of models which lack a hw rfkill switch was started (by yours truly). Things were done this way to avoid regressing existing models with a hw rfkill switch. In hindsight this was a mistake. Lenovo releases a lot of ideapad models every year and even the latest models still use the "VPC2004" ACPI interface the ideapad-laptop driver binds to. Having a hw rfkill switch is quite rare on modern hardware, so all these new models need to be added to the no_hw_rfkill_list, leading to a never ending game of whack a mole. Worse the failure mode when not present on the list, is very bad. In this case the ideapad-laptop driver will report the wifi as being hw-blocked, at which points NetworkManager does not even try to use it and the user ends up with non working wifi. This leads to various Linux fora on the internet being filled with wifi not working on ideapad laptops stories, which does not make Linux look good. The failure mode when we flip the default to assuming that a hw rfkill switch is not present OTOH is quite benign. When we properly report the wifi as being hw-blocked on ideapads which do have the hw-switch; and it is in the wifi-off position, then at least when using NetworkManager + GNOME3 the user will get a "wifi disabled in hardware" message when trying to connect to the wifi from the UI. If OTOH we assume there is no hardware rfkill switch, then the user will get an empty list for the list of available networks. Although the empty list vs the "wifi disabled in hardware" message is a regression, it is a very minor regression and it can easily be fixed on a model by model basis by filling the new hw_rfkill_list this commit introduces. Therefor this commit removes the ever growing no_hw_rfkill_list, flipping the default to assuming there is no hw rfkill switch and adding a new hw_rfkill_list. Thereby fixing the wifi not working on all the current ideapad and yoga models which are not on the list yet and also fixing it for all future ideapad and yoga models using the "VPC2004" ACPI interface. Note once this patch has been accepted upstream. I plan to write a blog post asking for users of ideapads and yoga's with a hw rfkill switch to step forward, so that we can populate the new hw_rfkill_list with the few older yoga and ideapad models which actually have a hw rfkill switch. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1703338Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Benjamin Renz 提交于
Add touchscreen platform data for the 'jumper ezpad 6 pro b' touchscreen. Signed-off-by: NBenjamin Renz <appswert@gmail.com> [hdegoede@redhat.com: Cleanup commit msg, fix some checkpatch warnings] Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-
由 Pavel Machek 提交于
Make error returns more consistent... no behaviour change intended. Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
-