The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not
implement a QMI interface on port 4, the reservation (RSVD(4)) has been
added to meet other companies that implement QMI on that interface.

LARA-R6 00B USB composition exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
Signed-off-by: NDavide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final
product uses a new USB composition with different PID. 0x90fa PID used
only by LARA-R6 internal prototypes.

Move 0x90fa PID directly in the option_ids array since used by other
Qualcomm based modem vendors as pointed out in:

  https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.comSigned-off-by: NDavide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

Add support for the following Fibocom FM160 composition:

0x0111: MBIM + MODEM + DIAG + AT

T:  Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0111 Rev= 5.04
S:  Manufacturer=Fibocom
S:  Product=Fibocom FM160 Modem_SN:12345678
S:  SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: NReinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

Add support for the AT and diag ports, similar to other qualcomm SDX55
modems. In QDL mode, the modem uses a different device ID and support
is provided by qcserial in commit 11c52d25 ("USB: serial: qcserial:
add EM9191 QDL support").

T:  Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=1199 ProdID=90d3 Rev=00.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Sierra Wireless EM9191
S:  SerialNumber=xxxxxxxxxxxxxxxx
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
Signed-off-by: NBenoît Monin <benoit.monin@gmx.fr>
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <johan@kernel.org>

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

This reverts commit 72a95859.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov

Pull x86 fixes from Borislav Petkov:
 "As usually the case, right after a major release, the tip urgent
  branches accumulate a couple more fixes than normal. And here is the
  x86, a bit bigger, urgent pile.

   - Use the correct CPU capability clearing function on the error path
     in Intel perf LBR

   - A CFI fix to ftrace along with a simplification

   - Adjust handling of zero capacity bit mask for resctrl cache
     allocation on AMD

   - A fix to the AMD microcode loader to attempt patch application on
     every logical thread

   - A couple of topology fixes to handle CPUID leaf 0x1f enumeration
     info properly

   - Drop a -mabi=ms compiler option check as both compilers support it
     now anyway

   - A couple of fixes to how the initial, statically allocated FPU
     buffer state is setup and its interaction with dynamic states at
     runtime"

* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
  perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
  ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
  x86/ftrace: Remove ftrace_epilogue()
  x86/resctrl: Fix min_cbm_bits for AMD
  x86/microcode/AMD: Apply the patch early on every logical thread
  x86/topology: Fix duplicated core ID within a package
  x86/topology: Fix multiple packages shown on a single-package system
  hwmon/coretemp: Handle large core ID value
  x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
  x86/fpu: Exclude dynamic states from init_fpstate
  x86/fpu: Fix the init_fpstate size check with the actual size
  x86/fpu: Configure init_fpstate attributes orderly

Pull io_uring follow-up from Jens Axboe:
 "Currently the zero-copy has automatic fallback to normal transmit, and
  it was decided that it'd be cleaner to return an error instead if the
  socket type doesn't support it.

  Zero-copy does work with UDP and TCP, it's more of a future proofing
  kind of thing (eg for samba)"

* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
  io_uring/net: fail zc sendmsg when unsupported by socket
  io_uring/net: fail zc send when unsupported by socket
  net: flag sockets supporting msghdr originated zerocopy

Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - corsair-psu: Fix typo in USB id description, and add USB ID for new
   PSU

 - pwm-fan: Fix fan power handling when disabling fan control

* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Add USB id of the new HX1500i psu
  hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
  hwmon: (corsair-psu) fix typo in USB id description

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

Pull pci fixes from Bjorn Helgaas:

 - Revert a simplification that broke pci-tegra due to a masking error

 - Update MAINTAINERS for Kishon's email address change and TI
   DRA7XX/J721E maintainer change

* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
  MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
  Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"

Pull missed media updates from Mauro Carvalho Chehab:
 "It seems I screwed-up my previous pull request: it ends up that only
  half of the media patches that were in linux-next got merged in -rc1.

  The script which creates the signed tags silently failed due to
  5.19->6.0 so it ended generating a tag with incomplete stuff.

  So here are the missing parts:

   - a DVB core security fix

   - lots of fixes and cleanups for atomisp staging driver

   - old drivers that are VB1 are being moved to staging to be
     deprecated

   - several driver updates - mostly for embedded systems, but there are
     also some things addressing issues with some PC webcams, in the UVC
     video driver"

* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
  media: sun6i-csi: Move csi buffer definition to main header file
  media: sun6i-csi: Introduce and use video helper functions
  media: sun6i-csi: Add media ops with link notify callback
  media: sun6i-csi: Remove controls handler from the driver
  media: sun6i-csi: Register the media device after creation
  media: sun6i-csi: Pass and store csi device directly in video code
  media: sun6i-csi: Tidy up video code
  media: sun6i-csi: Tidy up v4l2 code
  media: sun6i-csi: Tidy up Kconfig
  media: sun6i-csi: Use runtime pm for clocks and reset
  media: sun6i-csi: Define and use variant to get module clock rate
  media: sun6i-csi: Always set exclusive module clock rate
  media: sun6i-csi: Tidy up platform code
  media: sun6i-csi: Refactor main driver data structures
  media: sun6i-csi: Define and use driver name and (reworked) description
  media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  ...

The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

Also update the documentation accordingly.
Signed-off-by: NWilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomainSigned-off-by: NGuenter Roeck <linux@roeck-us.net>

Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.

Fixes: 17601bfe ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.

This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: NAndrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: NAlexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: NAlexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: NAlexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM/riscv fixes for 6.1, take #1

- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc

Merge tag 'kvmarm-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #2

- Fix a bug preventing restoring an ITS containing mappings
  for very large and very sparse device topology

- Work around a relocation handling error when compiling
  the nVHE object with profile optimisation

Merge tag 'kvmarm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #1

- Fix for stage-2 invalidation holding the VM MMU lock
  for too long by limiting the walk to the largest
  block mapping size

- Enable stack protection and branch profiling for VHE

- Two selftest fixes

Pull thermal control fix from Rafael Wysocki:
 "This fixes the control CPU selection in the intel_powerclamp thermal
  driver"

* tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel_powerclamp: Use first online CPU as control_cpu

Pull power management fixes from Rafael Wysocki:
 "These fix some issues and clean up code in ARM cpufreq drivers.

  Specifics:

   - Fix module loading in the Tegra124 cpufreq driver (Jon Hunter)

   - Fix memory leak and update to read-only region in the qcom cpufreq
     driver (Fabien Parent)

   - Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent,
     Yang Yingliang)"

* tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sun50i: Switch to use dev_err_probe() helper
  cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper
  cpufreq: imx6q: Switch to use dev_err_probe() helper
  cpufreq: dt: Switch to use dev_err_probe() helper
  cpufreq: qcom: remove unused parameter in function definition
  cpufreq: qcom: fix writes in read-only memory region
  cpufreq: qcom: fix memory leak in error path
  cpufreq: tegra194: Fix module loading

Pull ACPI fixes from Rafael Wysocki:
 "These fix issues introduced during this merge window (ACPI/PCI, device
  enumeration and documentation) and some other ones found recently.

  Specifics:

   - Add missing device reference counting to acpi_get_pci_dev() after
     changing it recently (Rafael Wysocki)

   - Fix resource list walk in acpi_dma_get_range() (Robin Murphy)

   - Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
     override warning message (Jiri Slaby)

   - Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)

   - Fix multiple error records handling in one of the ACPI extlog
     driver code paths (Tony Luck)

   - Prune DSDT override documentation from index after dropping it
     (Bagas Sanjaya)"

* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Fix DMA range assignment
  ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
  ACPI: resource: note more about IRQ override
  ACPI: resource: do IRQ override on LENOVO IdeaPad
  ACPI: extlog: Handle multiple records
  ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
  Documentation: ACPI: Prune DSDT override documentation from index

Pull EFI fixes from Ard Biesheuvel:

 - fixes for the EFI variable store refactor that landed in v6.0

 - fixes for issues that were introduced during the merge window

 - back out some changes related to EFI zboot signing - we'll add a
   better solution for this during the next cycle

* tag 'efi-fixes-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
  efi: libstub: Fix incorrect payload size in zboot header
  efi: libstub: Give efi_main() asmlinkage qualification
  efi: efivars: Fix variable writes without query_variable_store()
  efi: ssdt: Don't free memory if ACPI table was loaded successfully
  efi: libstub: Remove zboot signing from build options

Pull iommu fixes from Joerg Roedel:
 "Intel VT-d fixes:

   - Fix a lockdep splat issue in intel_iommu_init()

   - Allow NVS regions to pass RMRR check

   - Domain cleanup in error path"

* tag 'iommu-fixes-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Clean up si_domain in the init_dmars() error path
  iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
  iommu/vt-d: Use rcu_lock in get_resv_regions
  iommu: Add gfp parameter to iommu_alloc_resv_region

Pull HID fixes from Benjamin Tissoires:

 - a 12 year old bug fix for the Apple Magic Trackpad v1 (José Expósito)

 - a fix for a potential crash on removal of the Playstation controllers
   (Roderick Colenbrander)

 - a few new device IDs and device-specific quirks, most notably support
   of the new Playstation DualSense Edge controller

* tag 'for-linus-2022102101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: lenovo: Make array tp10ubkbd_led static const
  HID: saitek: add madcatz variant of MMO7 mouse device ID
  HID: playstation: support updated DualSense rumble mode.
  HID: playstation: add initial DualSense Edge controller support
  HID: playstation: stop DualSense output work on remove.
  HID: magicmouse: Do not set BTN_MOUSE on double report

Pull cifs fixes from Steve French:

 - memory leak fixes

 - fixes for directory leases, including an important one which fixes a
   problem noticed by git functional tests

 - fixes relating to missing free_xid calls (helpful for
   tracing/debugging of entry/exit into cifs.ko)

 - a multichannel fix

 - a small cleanup fix (use of list_move instead of list_del/list_add)

* tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: fix memory leaks in session setup
  cifs: drop the lease for cached directories on rmdir or rename
  smb3: interface count displayed incorrectly
  cifs: Fix memory leak when build ntlmssp negotiate blob failed
  cifs: set rc to -ENOENT if we can not get a dentry for the cached dir
  cifs: use LIST_HEAD() and list_move() to simplify code
  cifs: Fix xid leak in cifs_get_file_info_unix()
  cifs: Fix xid leak in cifs_ses_add_channel()
  cifs: Fix xid leak in cifs_flock()
  cifs: Fix xid leak in cifs_copy_file_range()
  cifs: Fix xid leak in cifs_create()

Pull nfsd fixes from Chuck Lever:
 "Fixes for patches merged in v6.1"

* tag 'nfsd-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: ensure we always call fh_verify_error tracepoint
  NFSD: unregister shrinker when nfsd_init_net() fails

When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().

But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 ...
 RIP: 0010:memcpy_erms+0x6/0x10
  ? __copy_xstate_to_uabi_buf+0x381/0x870
  fpu_copy_guest_fpstate_to_uabi+0x28/0x80
  kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
  ? __this_cpu_preempt_check+0x13/0x20
  ? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
  kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? __fget_light+0xd4/0x130
  __x64_sys_ioctl+0xe3/0x910
  ? debug_smp_processor_id+0x17/0x20
  ? fpregs_assert_state_consistent+0x27/0x50
  do_syscall_64+0x3f/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.

The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.

Fixes: 2308ee57 ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: NYuan Yao <yuan.yao@intel.com>
Suggested-by: NDave Hansen <dave.hansen@intel.com>
Signed-off-by: NChang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Tested-by: NYuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com

Pull SCSI fixes from James Bottomley:
 "Two small changes, one in the lpfc driver and the other in the core.

  The core change is an additional footgun guard which prevents users
  from writing the wrong state to sysfs and causing a hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix memory leak in lpfc_create_port()
  scsi: core: Restrict legal sdev_state transitions via sysfs

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - fix nvme-hwmon for DMA non-cohehrent architectures (Serge Semin)
      - add a nvme-hwmong maintainer (Christoph Hellwig)
      - fix error pointer dereference in error handling (Dan Carpenter)
      - fix invalid memory reference in nvmet_subsys_attr_qid_max_show
        (Daniel Wagner)
      - don't limit the DMA segment size in nvme-apple (Russell King)
      - fix workqueue MEM_RECLAIM flushing dependency (Sagi Grimberg)
      - disable write zeroes on various Kingston SSDs (Xander Li)

 - fix a memory leak with block device tracing (Ye)

 - flexible-array fix for ublk (Yushan)

 - document the ublk recovery feature from this merge window
   (ZiyangZhang)

 - remove dead bfq variable in struct (Yuwei)

 - error handling rq clearing fix (Yu)

 - add an IRQ safety check for the cached bio freeing (Pavel)

 - drbd bio cloning fix (Christoph)

* tag 'block-6.1-2022-10-20' of git://git.kernel.dk/linux:
  blktrace: remove unnessary stop block trace in 'blk_trace_shutdown'
  blktrace: fix possible memleak in '__blk_trace_remove'
  blktrace: introduce 'blk_trace_{start,stop}' helper
  bio: safeguard REQ_ALLOC_CACHE bio put
  block, bfq: remove unused variable for bfq_queue
  drbd: only clone bio if we have a backing device
  ublk_drv: use flexible-array member instead of zero-length array
  nvmet: fix invalid memory reference in nvmet_subsys_attr_qid_max_show
  nvmet: fix workqueue MEM_RECLAIM flushing dependency
  nvme-hwmon: kmalloc the NVME SMART log buffer
  nvme-hwmon: consistently ignore errors from nvme_hwmon_init
  nvme: add Guenther as nvme-hwmon maintainer
  nvme-apple: don't limit DMA segement size
  nvme-pci: disable write zeroes on various Kingston SSD
  nvme: fix error pointer dereference in error handling
  Documentation: document ublk user recovery feature
  blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping()

Pull io_uring fixes from Jens Axboe:

 - Fix a potential memory leak in the error handling path of io-wq setup
   (Rafael)

 - Kill an errant debug statement that got added in this release (me)

 - Fix an oops with an invalid direct descriptor with IORING_OP_MSG_RING
   (Harshit)

 - Remove unneeded FFS_SCM flagging (Pavel)

 - Remove polling off the exit path (Pavel)

 - Move out direct descriptor debug check to the cleanup path (Pavel)

 - Use the proper helper rather than open-coding cached request get
   (Pavel)

* tag 'io_uring-6.1-2022-10-20' of git://git.kernel.dk/linux:
  io-wq: Fix memory leak in worker creation
  io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd()
  io_uring/rw: remove leftover debug statement
  io_uring: don't iopoll from io_ring_ctx_wait_and_kill()
  io_uring: reuse io_alloc_req()
  io_uring: kill hot path fixed file bitmap debug checks
  io_uring: remove FFS_SCM