Some machines (like MBAs) might use a tiled framebuffer but not enable
display swizzling at boot time.  We want to preserve that configuration
if possible to prevent a boot time mode set.  On IVB+ it shouldn't
affect performance anyway since the memory controller does internal
swizzling anyway.

For most other configs we'll be able to enable swizzling at boot time,
since the initial framebuffer won't be tiled, thus we won't see any
corruption when we enable it.

v2: preserve swizzling if BIOS had it set (Daniel)
v3: preserve swizzling only if we inherited a tiled framebuffer (Daniel)
    check display swizzle setting in detect_bit_6_swizzle (Daniel)
    use gen6 as cutoff point (Daniel)
v4: fixup swizzle preserve again, had wrong init order (Daniel)
Reported-by: NKristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During S4 freeze we don't call intel_suspend_complete(), which would
save the gunit HW state, but during S4 thaw/restore events we call
intel_resume_prepare() which restores it, thus ending up in a corrupted
HW state.

Fix this by calling intel_suspend_complete() from the corresponding
freeze_late event handler.

The issue was introduced in
commit 016970be
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date:   Wed Aug 13 23:07:06 2014 +0530

CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As the workaround list has the value as initialization time
constant, we can do the simple checking on the go without
negleting igt.
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we build the workaround list in ring initialization
and decouple it from the actual writing of values, we
gain the ability to decide where and how we want to apply
the values.

The advantage of this will become more clear when
we need to initialize workarounds on older gens where
it is not possible to write all the registers through ring
LRIs.

v2: rebase on newest bdw workarounds

Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NArun Siluvery <arun.siluvery@linux.intel.com>
[danvet: Resolve tiny conflict in comments and ocd alignments a bit.]
[danvet2: Remove bogus force_wake_get call spotted by Paulo and QA.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The whole file is only built with CONFIG_COMPAT=y.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The legacy DRM suspend logic (effective in UMS) doesn't handle any S4 thaw
events so we don't need to care about it either. Only S3 suspend and S4
freeze events are handled. Leave an assert behind to be sure.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For consistency, since that's the rule followed for internal functions.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For consistency, since that's the rule followed for internal functions.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For consistency, since that's the rule followed for internal functions.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the ironlake mode set code, there was two instances of a loop through
encoders to find out if one of them has INTEL_OUTPUT_LVDS type. Simplify
the code by deleting some lines and use intel_pipe_has_type() instead.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Too many new drm driver writers seem to look at i915 for inspiration.
But we have two ways to do mmap, so discourage readers from the old,
ugly version. In a new driver we'd just expose two mmap offsets per
object, one for the gtt map and the other for the cpu map.

v2: Make it clear that i915 does cpu mmaps this way for past
cluelessness^W^W historical reasons. Asked for by Jani.

Cc: "Cheng, Yao" <yao.cheng@intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's clean this a bit

v2: Rebase after other Mika's patch that removed some BDW production workarounds.
v3: Removed stepping info.
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just a couple more macros that assume that they were being passed a
struct drm_device when they want a struct drm_i915_private. Use our
magic macro to ease transitioning over to using drm_i915_privates
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add support for 180 degree rotation for primary and sprite planes
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we are not able to free anything (the shrinker leaves nothing on the
global object lists), do not log anything. This is useful when other
subsystems are being stress-tested for their oom behaviour and i915.ko
is shouting into the logs about doing nothing.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The shrinker reports the number of pages freed, but we try to log the
number of bytes - which leads to some nonsense values being reportedly
freed during oom.
Reported-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Avoid to expose RC6 and RC6pp to the platforms that doesn't support it.
So powertop can be changed to show RC6p and RC6pp only on the platforms
they are available.

v2: Simplify by merging RC6p and RC6pp groups and respect the spec that
mentions deep and deepest RC6 on SNB and IVB although they keep disabled
by default.

v3: Remove unecessary space.

v4: RC6p and RC6pp is only for SNB and IVB; unify debug msg and use
    has_rc6p() on sanitize options instead of is gen 6 and ivb.

v5: yet another fix on has_rc6p macro. final is_gen6 or is_ivb! To make sure
    we are excluding hsw and baytrail.

References: https://bugs.freedesktop.org/show_bug.cgi?id=84524
Cc: Josh Triplett <josh.triplett@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Even if the fb is the same we should still check if the sizes are
valid to be set.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move check inside intel_crtc_cursor_set_obj() to
intel_check_cursor_plane(), we only use it there so move them out to
make the merge of intel_crtc_cursor_set_obj() into
intel_check_cursor_plane() easier.

This is another step toward the atomic modesetting support and unification
of plane operations such pin/unpin of fb objects on i915.

v2: take Ville's comment: move crtc_{w,h} assignment a bit down in the
code
v3: take Ville's comment: kept only the restructuring changes, the rest of
the code was moved to a separated patch since it is a bug fix (we weren't
checking sizes when the fb was the same)
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
[danvet: Fixup commit message mixup.]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that universal planes are in place we don't need this plane unref on
failures.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fold intel_pipe_set_base() in the update primary plane path merging
pieces of code that are common to both paths.

Basically the the pin/unpin procedures are the same for both paths
and some checks can also be shared (some of the were moved to the
check() stage)

v2: take Ville's comments:
	- remove unnecessary plane check
	- move mutex lock to inside the conditional
	- make the pin fail message a debug one
	- add a fixme for the fastboot hack
	- call intel_frontbuffer_flip() after FBC update

v3: take more Ville's comments:
	- fold update code under if (intel_crtc->active), and do the
	visible/!visible split inside.
	- check ret inside the same conditional we assign it

v4: don't use intel_enable_primary_hw_plane(), the primary_enabled
check inside will break page flips

v5: take more Ville's comments:
	- set primary_enabled to true and add BDW hack
	- unify if (old_fb) and if (old_fb != fb)

v6: take more Ville's comments:
	- make was_primary bool and fix its check
	- add the BDW vblank wait comment
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As stated in the few previous commits, IS_ULT/ULX() is better
per-platform as it has different consequences depending on the platform.

We now can get rid of it.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

IS_ULT() wasn't taking into account SKL so we had a warn with SPT-LP.

We don't realy need those checks here, and as we don't need to introduce
IS_SKL_ULT/ULX() at the moment, let's just drop them.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hsw_get_cdclk_freq() is really just HSW, so we can use IS_HSW_ULT()
instead of IS_ULT() there.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The quality of being a ULT or ULX package doesn't tell anything across
generations and so a global IS_ULT() macro doesn't make much sense, esp.
as we're adding new products.

So, spell out which ULT/ULX SKUs we are talking about here, namely HSW
and BDW.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HAS_IPS() has a '|| IS_BROADWELL()', no need to check for IS_BDW_ULT().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to add the BDW pci ULT/ULX checks inside a if (IS_HASWELL(dev))
code path.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Fix spelling fail.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This simplifies the code in the vlv irq handler. Also this now
means that we correctly filter underruns on gen2-4.

And as the real upshot I need to document one less function for
the fifo underrun code.

v2: Shorten one long line.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Way too much copypasta all over. And this also clarifies a bit what's
going on since it separates the "do we have an underrun irq" from the
"should we report the underrun" check.

v2: Fix excessively long lines.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

It's the new rule!
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prep work for some nice documentation. Requires that we export the
display irq enable/disable functions on ilk/ibx. But we already export
them for vlv/i915. So not more inconsistency.

v2: Rebase on top of skl stage 1.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This reverts commit 8c50f10d.

It's not yet solid and Dave objected to pulling the tree in its
current state.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: http://mid.mail-archive.com/CAPM=9ty2r1MLE=wzC-_vNSUzXVqAyXiGgocpSV9qOp0gzpK3xA@mail.gmail.com
References: http://lists.freedesktop.org/archives/intel-gfx/2014-October/053926.htmlAcked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

So I've sent the first pull request to Dave and I expect his request
for a merge tree any second now ;-)

More seriously I have some pending patches for 3.19 that depend upon
both trees, hence backmerge. Conflicts are all trivial.

Conflicts:
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/intel_display.c

v2: Of course I've forgotten the fixup script for the silent conflict.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Fix short vs. long hpd detection for non-g4x and non-pch split
platforms.

Broken since introduction in
commit 13cf5504
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Jun 18 11:29:35 2014 +1000

    drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On CHV the display DDC pins may be muxed to an alternate function if
there's no need for DDC on a specific port, which is the case for eDP
ports since there's no way to plug in a DP++ HDMI dongle.

This causes problems when trying to determine if the port is present
since the the DP_DETECTED bit is the latched state of the DDC SDA pin
at boot. If the DDC pins are muxed to an alternate function the bit
may indicate that the port isn't present.

To work around this look at the VBT as well as the DP_DETECTED bit
to determine if we should attempt registering an eDP port. Do this
only for ports B and C since port D doesn't support eDP (no PPS/BLC).

In theory someone could also wire up a normal DP port w/o DDC lines.
That would just mean that simple DP++ HDMI dongles wouldn't work
on such a port. With this change we would still fail to register
such DP ports. But let's hope no one wires their board in such a way,
and if they do we can extend the VBT checks to cover normal DP ports
as well.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84265Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We were missing the pipe B/C vblank bits! Take a look at
gen8_de_irq_postinstall for a comparison.

This should fix a bunch of IGT tests.

There are a few more things we could improve on this code, but this
should be the minimal fix to unblock us.

v2: s/extra_iir/extra_ier/ because IIR doesn't make sense (Ville)

Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=83640
Testcase: igt/*
Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Move the duplicated DIV_ROUND_CLOSEST_ULL macro into the intel_drv.h
header file so that it can be shared between intel_display.c
and intel_panel.c.
Signed-off-by: NU. Artie Eoff <ullysses.a.eoff@intel.com>
Reviewed-By: NJoe Konno <joe.konno@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Improper truncated integer division in the scale() function causes
actual_brightness != brightness. This (partial) work-around should be
sufficient for a majority of use-cases, but it is by no means a complete
solution.

TODO: Determine how best to scale "user" values to "hw" values, and
vice-versa, when the ranges are of different sizes. That would be a
buggy scenario even with this work-around.

The issue was introduced in the following (v3.17-rc1) commit:

    6dda730e drm/i915: respect the VBT minimum backlight brightness

Note that for easier backporting this commit adds a duplicated macro.
A follow-up cleanup patch rectifies this for 3.18+

v2: (thanks to Chris Wilson) clarify commit message, use rounded division
macro

v3: -DIV_ROUND_CLOSEST() fails to build with CONFIG_X86_32=y. (Jani)
    -Use DIV_ROUND_CLOSEST_ULL() instead. (Damien)
    -v1 and v2 originally authored by Joe Konno.
Signed-off-by: NU. Artie Eoff <ullysses.a.eoff@intel.com>
Cc: stable@vger.kernel.org
Reviewed-By: NJoe Konno <joe.konno@intel.com>
[danvet: Add backporting note.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>