msleep() can sleep up to 20ms.

As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add an empty line before return at the end of functions.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Align all function parameters to first open brace when declaring
functions.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

msleep() can sleep up to 20ms.

As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Sort include directives alphabetically to ease maintenance.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Two minor style fixes, align function parameter and remove un-necessary
spaces.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Yet more whitespace and style neatening

o Add blank lines before returns
o Reverse a logic test and return early on error
o Move formats to same line as dev_<level> calls
o Remove an unnecessary period from a logging message
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Update multiline statements to open parenthesis.
Update a ?: to a single line.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement the poll callback for the dvbdev_ci file ops. The ts_poll()
function queries the DVB ring buffers for available data and space, and
reports this as appropriate. Also, set the dvb_device readers, writers
and users to proper values (one reader, one writer, two users).

This fixes the raw CI TS transport in conjunction with TVheadend's
DDCI functionality.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When probing the I2C busses in cineS2_probe(), it's no error when there's
no hardware connected to the probed expansion connector, so print this
informal message with info severity.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Currently, if there's no CXD2099AR attached to any expansion connector of
the ngene hardware, it will complain with this on every module load:

    cxd2099 1-0040: No CXD2099AR detected at 0x40
    cxd2099: probe of 1-0040 failed with error -5
    ngene 0000:02:00.0: CXD2099AR attach failed

This happens due to the logic assuming such hardware is always there and
blindly tries to attach the cxd2099 I2C driver. Rather add a probe
function (in ngene-cards.c with a prototype in ngene.h) to check for
the existence of such hardware before probing, and don't try further if
no CXD2099 was found.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The I2C adapter evaluation (based on chan->number) is duplicated at
several places (tuner_attach_() functions, demod_attach_stv0900() and
cineS2_probe()). Clean this up by wrapping that construct in a separate
function which all users of that can pass the ngene_channel pointer and
get the correct I2C adapter from.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add support for the STV0910/STV6111/LNBH25 based DuoFlex S2 V4 DVB-S2
addon modules by recognizing them from their XO2 type value and using
the auxiliary stv0910, stv6111 and lnbh25 driver to form a complete
DVB frontend.

This also adds autoselection (if MEDIA_SUBDRV_AUTOSELECT) of the STV0910,
STV6111 and LNBH25 demod/tuner/LNB-IC drivers to Kconfig.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Recognize (probe) and support (attach) all Sony CXD28xx based DuoFlex
addon modules/cards, namely the DuoFlex CT2 (CXD2837), ISDB-T (CXD2838),
C2T2 (CXD2843) and C2T2I (CXD2854). Since all these modules are equipped
with a MachXO2 interface, that support is required for the hardware to
work. This functionality utilises the auxiliary cxd2841er and tda18212
drivers.

This also adds autoselection (if MEDIA_SUBDRV_AUTOSELECT) of the CXD2841ER
demod driver to Kconfig. The __maybe_unused annotation can now be removed
from the xo2names array.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Detect and initialise modules equipped with XO2 interfaces (Lattice
MachXO2). This requires a few more I2C transfer functions which this adds
as well. Defines for the different possible (available) module types are
added to ngene.h. The support for the actual tuners contained on these
addon modules is kept separate from this commit and is being added with
the next commits.

The xo2names array is temporarily marked __maybe_unused to silence a
corresponding compiler warning at this stage.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add support for STV0367+TDA18212 based DuoFlex CT addon modules. For this,
add a demod probe function and all necessary demod/tuner attach functions
which use existing auxiliary drivers (stv0367 and tda18212) to support
this hardware. As tda18212 is an I2C client driver, proper cleanup code
is added to the deregistration sequence in ngene-core. To not cause use-
after-free situations when there's a CXD2099 I2C client connected, which
is rather freed in ngene-core.c:cxd_detach(), add i2c_client_fe to struct
ngene_channel to keep track if the i2c_client was allocated by a frontend
driver, rather than the CI code paths. Also move the I2C access functions
to the top of the file and add the required read_regs() function for the
tda18212 ping to work.

This adds autoselection (if MEDIA_SUBDRV_AUTOSELECT) of the STV0367 demod
driver and TDA18212 tuner driver to Kconfig aswell.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make it more clear which demod_type is used for which hardware by having
defines for the possible demod_type values. With that, change the
demod_type evaluation in tuner_attach_probe() to a switch-case instead
of an if() for each possible value.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Convert all printk() and pr_*() kernel log printing to rather use the
dev_*() macros. Not only is it discouraged to use printk() (checkpatch
even complains about that), but also this helps identifying the exact PCI
device for any printed event, and it makes almost all printing shorter
in terms of code style since there's no need to use KERN_* DEVICE_NAME
any more (dev_*() will take care of this).

Since the dprintk macro define isn't used anymore, remove it.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add two more device IDs for cards supported by the ngene driver.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A successful CA module initialisation isn't an error. Change the
log print to info severity accordingly.

Cc: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some local variables will be set to an appropriate value before usage.
Thus omit explicit initialisations at the beginning of these functions.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Acked-by: NAlexey Klimov <klimov.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The values on this array never changes. Make it const.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the ts bus control function moved higher, enabling it
after configuring frontend and removeing ts_bus_ctrl callback.

While here, also add an error checking and re-add a comment
that were removed by commit 44587774 ("media: si2168:
Add ts bus coontrol, turn off bus on sleep").

[mchehab@s-opensource.com: I ended by applying the first version,
 instead of the right one. So, this patch contains the diff and
 the v2 changelog instead]

Fixes: 44587774 ("media: si2168: Add ts bus coontrol, turn off bus on sleep")
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Rework both DiSEqC send functions (send_master_cmd() and send_burst()) to
utilise the new SET_REG() and SET_FIELD() macros. Esp. due to SET_FIELD(),
this makes sure that not all bits (with unrelated purposes) are always
rewritten, but only those needed for sending DiSEqC commands. In
send_burst(), this makes sure that DISEQC_MODE isn't changed from 3 to 2
inbetween when sending SEC_MINI_A. Also, change both functions to write
DISEQC_MODE first before setting DIS_PRECHARGE. This makes diseqc control
work more reliable for "fullblown" DiSEqC strings in VDR's diseqc.conf in
combination with certain multiswitches.

Fixes: 448461af ("media: dvb-frontends/stv0910: implement diseqc_send_burst")
Reported-by: NHelmut Auer <post@helmutauer.de>
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Tested-by: NHelmut Auer <post@helmutauer.de>
Tested-by: NRichard Scobie <rascobie@slingshot.co.nz>
Tested-by: NDietmar Spingler <d_spingler@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

According to the TODO file, this driver only landed in staging because of
the way device nodes and data transfers are handled. Besides that this way
(use of secX devices) has become sort of standard to date (ie. VDR
supports this literally since ages via the ddci plugin, TVHeadend received
this functionality lately, and minisatip being currently worked on
regarding this), most importantly this I2C client only driver isn't even
responsible for setting up device nodes, not for handling data
transfer and so on, but only serves as interface for the dvb_ca_en50221
subsystem, just like every other DVB card out in the wild, with hard-wired
or such flexible CA interfaces. And, it would even work with cards having
the cxd2099 controller hard-wired.

Also, this driver received quite some love and even is a proper I2C client
driver by now. So, as this driver acts as a EN50221 frontend device, move
it to dvb-frontends. There is no need to keep it buried in staging.

This commit also updates all affected Kconfig and Makefile's, and adds
MEDIA_AUTOSELECT depends to ddbridge and ngene.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Change the way the cxd2099 hardware is being attached to the new I2C
client interface way.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Convert the cxd2099 driver to use regmap for I2C accesses, removing all
own i2c_*() functions. With that, make the driver a proper I2C client
driver. This also adds the benefit of having a proper cleanup function
(cxd2099_remove() in this case) that takes care of resource cleanup
upon I2C client deregistration.

At this point, keep the static inline declared cxd2099_attach()
function so that drivers using the legacy/proprietary style attach way
still compile, albeit lacking the cxd2099 driver functionality. This
is taken care of in the next two patches.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Deduplicate the checks for a valid ptr in port->en, and also handle the
default case to also catch eventually yet unsupported CI hardware.
Signed-off-by: NDaniel Scheller <d.scheller@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The PLAT_S5P symbol was removed in commit d78c16cc ("ARM: SAMSUNG:
Remove remaining legacy code").

Remove the PLAT_S5P dependency from VIDEO_SAMSUNG_S5P_CEC.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Signed-off-by: NUlf Magnusson <ulfalizer@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Thoses files are unused since commit b3b96144 ("V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the PCI ID list")
8 year after, we could remove it.
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

bsp_i2c.h is unused since commit ffe7c4f9 ("[media] drx-j: Get rid of drx39xyj/bsp_tuner.h")
Remove it from tree.
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of directly accessing to dmadev->device_prep_interleaved_dma() use
the dmaengine_prep_interleaved_dma() wrapper instead.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Hauppauge Solo/Dual HD DVB models use a si2157 tuner, which is set to
produce inverted spectrum. This configures the si2168 DVB demod for
inverted spectrum on both affected models.

[mchehab@s-opensource.com: rebased on the top of upstream]
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some tuners produce inverted spectrum, but the si2168 is not
currently set up to accept it. This adds an optional parameter
to set the frontend up to receive inverted spectrum.

Parameter is optional and only boards who enable inversion
will utilize this.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

While experimenting with older compiler versions, I ran
into a warning that no longer shows up on gcc-4.8 or newer:

drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format':
drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds

This is an off-by-one bug, leading to an access before the start of the
array, while newer compilers silently assume this undefined behavior
cannot happen and leave the loop at index 0 if no other entry matches.

As Sylvester explains, we actually need to ensure that the
value is within the range, so this reworks the loop to be
easier to parse correctly, and an additional check to fall
back on the first format value for any unexpected input.

I found an existing gcc bug for it and added a reduced version
of the function there.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3
Fixes: babde1c2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The driver outputs on success, but is silent on failure. Give
one message that probe failed.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>