It is supported by all drivers
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The ring is used for looping back tx powersave filtered frames, so it could
use some more room, in case more than one aggregate was queued
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The hardware should only start processing the ring after at least one
buffer has been added
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Avoids a theoretical corner case where the hardware could try to process
a stale descriptor after a watchdog reset
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Define MT_DRV_RX_DMA_HDR flag in drv_flag in order to not skip rx frame
dma header since new devices (e.g. mt7663u) reports rx frame info in the
usb dma header
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This is a preliminary patch to support mt7663u usb dongles
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76u_skb_dma_info utility routine in mt76-usb module in order
to be reused adding mt7663u support
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

7663u devices rely on a different endpoint mapping. Take it into account
in mt76u_alloc_tx routine
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce extended utility routines to read/write data o usb bus. New
devices (e.g. mt7663u) will rely on both upper and lower part of the
register address. Add ext parameter to mt76u_init signature in order to
reuse the code adding mt7663u support.
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add mt76u_alloc_mcu_queue  utility routine to allocate mcu hw rx queue.
This is a preliminary patch to support new devices (e.g. mt7663u) that
rely on a hw queue for mcu messages
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Resume all possible rx queues after suspend. This is a preliminary patch
to support mt7663u devices
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add mt76_queue parameter to mt76u_rx_urb_alloc signature since this
routine will be used to allocate urbs for mcu hw queue used by new
chipset generation (e.g. mt7663u). Check sg_max_size in in
mt76u_urb_alloc in order to use linear urb for mcu queue
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76u_alloc_rx_queue routine to allocate rx hw queue.
This is a preliminary patch to support new devices (e.g. mt7663u) that
rely on a hw queue for mcu messages
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Stop/free all configured rx queues (data/mcu) in
mt76u_stop_rx/mt76u_free_rx. This is a preliminary patch to support new
devices (e.g. mt7663u) that rely on a hw queue for mcu messages
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76u_free_rx_queue utility routine to free rx hw queue.
This is a preliminary patch to support new devices (e.g. mt7663u) that
rely on a hw queue for mcu messages
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mcu buffer allocation in mt76x2u/mt76x0u drivers since newer
chipsets (e.g. mt7663u) does not rely on synchronous mcu communication
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add queue_id parameter to mt76u_submit_rx_buffers in order to reuse it
adding mt7663u support
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

In order to reuse mt76u_complete_rx for both data and mcu rx queue, rely
on mt76_queue as urb context in mt76u_complete_rx. Moreover set usb rx
endoint according to rx queue in mt76u_submit_rx_buf. This is a
preliminary patch to add mt7663u support
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76_queue parameter to mt76u_refill_rx signature in order to
reuse it for mcu hw rx queue
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Rely on mt76_queue pointer in mt76u_get_next_rx_entry in order to add
support for new devices (e.g 7663u) that reports fw events through hw rx
mcu queue
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce mt76u_process_rx_queue routine to process rx hw queue.
This is a preliminary patch to support new devices (e.g. mt7663u) that
rely on a hw queue for mcu messages
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

New devices (e.g. mt7663u) do not rely on stats workqueue to load tx
statistics but will be reported by the firmware. Check tx_status_data
pointer in mt76u_tx_tasklet in order to reuse tx tasklet for new devices
Co-developed-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Starting from 'commit ee8040139ab1 ("mt76: do not overwrite
max_tx_fragments if it has been set")' we can avoid overwriting
max_tx_fragments for mt76x02u devices
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Rely on mac80211 airitme utility routines and remove mt76 duplicated code
to estimate tx/rx airtime
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Acked-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Get rid of mt76_dfs_start_rdd unused declaration
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76-core module since now all
drivers support Channel Switch Announcement
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

The field 'u16 len' should be __le16.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce dfs radar pattern specs in mt7615 driver in order to make
dfs debugging easier. Radar pulse/pattern thresholds are taken from
vendor SDK.
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Remove tracing leftover target in mt76x2 Makefile
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Introduce token tracing support in mt7615_mac_tx_free routine
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move mac_txdone tracepoint in common code in order to
be reused by mt7603 and mt7615 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Move dev_irq tracepoint in common code in order to be reused by mt7603
and mt7615 drivers
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add a get_stats() callback for mib statistics.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Update per-phy mib counters every 500ms.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This adds a get_tsf() callback for ibss.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Add a set_antenna callback to setup per phy tx/rx streams.
Signed-off-by: NShayne Chen <shayne.chen@mediatek.com>
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

No need to send both MCU_EXT_CMD_SET_RX_PATH and MCU_EXT_CMD_CHANNEL_SWITCH
together to MCU.

Split them out by passing the proper command in the corresponding flow.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

MT7615 supports dual-wiphy which means that it can run on 2.4G and 5GHz
channels simultaneously, and driver should configure each band.

Add missing register settings, and refine band related definitions to
avoid duplicate codes.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Fix the following compilation warning in mt76_eeprom_override routine
when CONFIG_OF is not set and label 'out' is not actually used

drivers/net/wireless/mediatek/mt76/eeprom.c: In function ‘mt76_eeprom_override’:
drivers/net/wireless/mediatek/mt76/eeprom.c:100:1: warning: label ‘out’ defined but not used [-Wunused-label]
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>