This would need updating to make prctl be the new default, but it's
simpler to delete it and refer to the dup.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201105001406.13005-2-aarcange@redhat.com

Switch the kernel default of SSBD and STIBP to the ones with
CONFIG_SECCOMP=n (i.e. spec_store_bypass_disable=prctl
spectre_v2_user=prctl) even if CONFIG_SECCOMP=y.

Several motivations listed below:

- If SMT is enabled the seccomp jail can still attack the rest of the
  system even with spectre_v2_user=seccomp by using MDS-HT (except on
  XEON PHI where MDS can be tamed with SMT left enabled, but that's a
  special case). Setting STIBP become a very expensive window dressing
  after MDS-HT was discovered.

- The seccomp jail cannot attack the kernel with spectre-v2-HT
  regardless (even if STIBP is not set), but with MDS-HT the seccomp
  jail can attack the kernel too.

- With spec_store_bypass_disable=prctl the seccomp jail can attack the
  other userland (guest or host mode) using spectre-v2-HT, but the
  userland attack is already mitigated by both ASLR and pid namespaces
  for host userland and through virt isolation with libkrun or
  kata. (if something if somebody is worried about spectre-v2-HT it's
  best to mount proc with hidepid=2,gid=proc on workstations where not
  all apps may run under container runtimes, rather than slowing down
  all seccomp jails, but the best is to add pid namespaces to the
  seccomp jail). As opposed MDS-HT is not mitigated and the seccomp
  jail can still attack all other host and guest userland if SMT is
  enabled even with spec_store_bypass_disable=seccomp.

- If full security is required then MDS-HT must also be mitigated with
  nosmt and then spectre_v2_user=prctl and spectre_v2_user=seccomp
  would become identical.

- Setting spectre_v2_user=seccomp is overall lower priority than to
  setting javascript.options.wasm false in about:config to protect
  against remote wasm MDS-HT, instead of worrying about Spectre-v2-HT
  and STIBP which again is already statistically well mitigated by
  other means in userland and it's fully mitigated in kernel with
  retpolines (unlike the wasm assist call with MDS-HT).

- SSBD is needed to prevent reading the JIT memory and the primary
  user being the OpenJDK. However the primary user of SSBD wouldn't be
  covered by spec_store_bypass_disable=seccomp because it doesn't use
  seccomp and the primary user also explicitly declined to set
  PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS despite it easily
  could. In fact it would need to set it only when the sandboxing
  mechanism is enabled for javaws applets, but it still declined it by
  declaring security within the same user address space as an
  untenable objective for their JIT, even in the sandboxing case where
  performance would be a lesser concern (for the record: I kind of
  disagree in not setting PR_SPEC_STORE_BYPASS in the sandbox case and
  I prefer to run javaws through a wrapper that sets
  PR_SPEC_STORE_BYPASS if I need). In turn it can be inferred that
  even if the primary user of SSBD would use seccomp, they would
  invoke it with SECCOMP_FILTER_FLAG_SPEC_ALLOW by now.

- runc/crun already set SECCOMP_FILTER_FLAG_SPEC_ALLOW by default, k8s
  and podman have a default json seccomp allowlist that cannot be
  slowed down, so for the #1 seccomp user this change is already a
  noop.

- systemd/sshd or other apps that use seccomp, if they really need
  STIBP or SSBD, they need to explicitly set the
  PR_SET_SPECULATION_CTRL by now. The stibp/ssbd seccomp blind
  catch-all approach was done probably initially with a wishful
  thinking objective to pretend to have a peace of mind that it could
  magically fix it all. That was wishful thinking before MDS-HT was
  discovered, but after MDS-HT has been discovered it become just
  window dressing.

- For qemu "-sandbox" seccomp jail it wouldn't make sense to set STIBP
  or SSBD. SSBD doesn't help with KVM because there's no JIT (if it's
  needed with TCG it should be an opt-in with
  PR_SET_SPECULATION_CTRL+PR_SPEC_STORE_BYPASS and it shouldn't
  slowdown KVM for nothing). For qemu+KVM STIBP would be even more
  window dressing than it is for all other apps, because in the
  qemu+KVM case there's not only the MDS attack to worry about with
  SMT enabled. Even after disabling SMT, there's still a theoretical
  spectre-v2 attack possible within the same thread context from guest
  mode to host ring3 that the host kernel retpoline mitigation has no
  theoretical chance to mitigate. On some kernels a
  ibrs-always/ibrs-retpoline opt-in model is provided that will
  enabled IBRS in the qemu host ring3 userland which fixes this
  theoretical concern. Only after enabling IBRS in the host userland
  it would then make sense to proceed and worry about STIBP and an
  attack on the other host userland, but then again SMT would need to
  be disabled for full security anyway, so that would render STIBP
  again a noop.

- last but not the least: the lack of "spec_store_bypass_disable=prctl
  spectre_v2_user=prctl" means the moment a guest boots and
  sshd/systemd runs, the guest kernel will write to SPEC_CTRL MSR
  which will make the guest vmexit forever slower, forcing KVM to
  issue a very slow rdmsr instruction at every vmexit. So the end
  result is that SPEC_CTRL MSR is only available in GCE. Most other
  public cloud providers don't expose SPEC_CTRL, which means that not
  only STIBP/SSBD isn't available, but IBPB isn't available either
  (which would cause no overhead to the guest or the hypervisor
  because it's write only and requires no reading during vmexit). So
  the current default already net loss in security (missing IBPB)
  which means most public cloud providers cannot achieve a fully
  secure guest with nosmt (and nosmt is enough to fully mitigate
  MDS-HT). It also means GCE and is unfairly penalized in performance
  because it provides the option to enable full security in the guest
  as an opt-in (i.e. nosmt and IBPB). So this change will allow all
  cloud providers to expose SPEC_CTRL without incurring into any
  hypervisor slowdown and at the same time it will remove the unfair
  penalization of GCE performance for doing the right thing and it'll
  allow to get full security with nosmt with IBPB being available (and
  STIBP becoming meaningless).

Example to put things in prospective: the STIBP enabled in seccomp has
never been about protecting apps using seccomp like sshd from an
attack from a malicious userland, but to the contrary it has always
been about protecting the system from an attack from sshd, after a
successful remote network exploit against sshd. In fact initially it
wasn't obvious STIBP would work both ways (STIBP was about preventing
the task that runs with STIBP to be attacked with spectre-v2-HT, but
accidentally in the STIBP case it also prevents the attack in the
other direction). In the hypothetical case that sshd has been remotely
exploited the last concern should be STIBP being set, because it'll be
still possible to obtain info even from the kernel by using MDS if
nosmt wasn't set (and if it was set, STIBP is a noop in the first
place). As opposed kernel cannot leak anything with spectre-v2 HT
because of retpolines and the userland is mitigated by ASLR already
and ideally PID namespaces too. If something it'd be worth checking if
sshd run the seccomp thread under pid namespaces too if available in
the running kernel. SSBD also would be a noop for sshd, since sshd
uses no JIT. If sshd prefers to keep doing the STIBP window dressing
exercise, it still can even after this change of defaults by opting-in
with PR_SPEC_INDIRECT_BRANCH.

Ultimately setting SSBD and STIBP by default for all seccomp jails is
a bad sweet spot and bad default with more cons than pros that end up
reducing security in the public cloud (by giving an huge incentive to
not expose SPEC_CTRL which would be needed to get full security with
IBPB after setting nosmt in the guest) and by excessively hurting
performance to more secure apps using seccomp that end up having to
opt out with SECCOMP_FILTER_FLAG_SPEC_ALLOW.

The following is the verified result of the new default with SMT
enabled:

(gdb) print spectre_v2_user_stibp
$1 = SPECTRE_V2_USER_PRCTL
(gdb) print spectre_v2_user_ibpb
$2 = SPECTRE_V2_USER_PRCTL
(gdb) print ssb_mode
$3 = SPEC_STORE_BYPASS_PRCTL
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201104235054.5678-1-aarcange@redhat.comAcked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/lkml/AAA2EF2C-293D-4D5B-BFA6-FF655105CD84@redhat.comAcked-by: NWaiman Long <longman@redhat.com>
Link: https://lore.kernel.org/lkml/c0722838-06f7-da6b-138f-e0f26362f16a@redhat.com

Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea000 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.

It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.

Famous last words.

Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is.  It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.

Let's see what odd architecture did something else strange in this area
to break things.  But my arm64 cross build is clean.

Fixes: 9caea000 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: NNathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Borislav Petkov:

 - Prevent a infinite loop in the MCE recovery on return to user space,
   which was caused by a second MCE queueing work for the same page and
   thereby creating a circular work list.

 - Make kern_addr_valid() handle existing PMD entries, which are marked
   not present in the higher level page table, correctly instead of
   blindly dereferencing them.

 - Pass a valid address to sanitize_phys(). This was caused by the
   mixture of inclusive and exclusive ranges. memtype_reserve() expect
   'end' being exclusive, but sanitize_phys() wants it inclusive. This
   worked so far, but with end being the end of the physical address
   space the fail is exposed.

 - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
   exceed the previous maximum.

* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid infinite loop for copy from user recovery
  x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
  x86/platform: Increase maximum GPIO number for X86_64
  x86/pat: Pass valid address to sanitize_phys()

Pull perf event fix from Thomas Gleixner:
 "A single fix for the perf core where a value read with READ_ONCE() was
  checked and then reread which makes all the checks invalid. Reuse the
  already read value instead"

* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Reuse value read using READ_ONCE instead of re-reading it

Pull locking fixes from Thomas Gleixner:
 "A set of updates for the RT specific reader/writer locking base code:

   - Make the fast path reader ordering guarantees correct.

   - Code reshuffling to make the fix simpler"

[ This plays ugly games with atomic_add_return_release() because we
  don't have a plain atomic_add_release(), and should really be cleaned
  up, I think    - Linus ]

* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwbase: Take care of ordering guarantee for fastpath reader
  locking/rwbase: Extract __rwbase_write_trylock()
  locking/rwbase: Properly match set_and_save_state() to restore_state()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes when scv (System Call Vectored) is used to make a syscall
   when a transaction is active, on Power9 or later.

 - Fix bad interactions between rfscv (Return-from scv) and Power9
   fake-suspend mode.

 - Fix crashes when handling machine checks in LPARs using the Hash MMU.

 - Partly revert a recent change to our XICS interrupt controller code,
   which broke the recently added Microwatt support.

Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.

* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xics: Set the IRQ chip data for the ICS native backend
  powerpc/mce: Fix access error in mce handler
  KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
  powerpc/64s: system call rfscv workaround for TM bugs
  selftests/powerpc: Add scv versions of the basic TM syscall tests
  powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state

Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix bugs in checkkconfigsymbols.py

 - Fix missing sys import in gen_compile_commands.py

 - Fix missing FORCE warning for ARCH=sh builds

 - Fix -Wignored-optimization-argument warnings for Clang builds

 - Turn -Wignored-optimization-argument into an error in order to stop
   building instead of sprinkling warnings

* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
  x86/build: Do not add -falign flags unconditionally for clang
  kbuild: Fix comment typo in scripts/Makefile.modpost
  sh: Add missing FORCE prerequisites in Makefile
  gen_compile_commands: fix missing 'sys' package
  checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
  checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit

Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix ip display in 'perf script' when output type != attr->type.

 - Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
   fixing the build with libbpf v0.6+.

 - Make use of FD() robust in libperf, fixing a segfault with 'perf stat
   --iostat list'.

 - Initialize addr_location:srcline pointer to NULL when resolving
   callchain addresses.

 - Fix fused instruction logic for assembly functions in 'perf
   annotate'.

* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
  libperf evsel: Make use of FD robust.
  perf machine: Initialize srcline string member in add_location struct
  perf script: Fix ip display when type != attr->type
  perf annotate: Fix fused instr logic for assembly functions

The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().

That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.

Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there.  But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.

If somebody actually uses this driver on an alpha and this fixes it for
you, please email me.  Because that is just incredibly bizarre.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the previous commit (9caea000: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.

Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.

Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.

Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.

Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().

Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/Signed-off-by: NHelge Deller <deller@gmx.de>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 27da370e.

Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.

Revert the problematic commit until fixed.

Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/Reported-and-tested-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Emma Anholt <emma@anholt.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commits

  9984d666 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84b: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/Reported-and-tested-by: NMichael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Similar to commit 589834b3 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").

Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:

$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]

When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.

To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:

clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]

To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.

Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/
Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: NRamji Jiyani <ramjiyani@google.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

make:

    arch/sh/boot/Makefile:87: FORCE prerequisite is missing

Add the missing FORCE prerequisites for all build targets identified by
"make help".

Fixes: e1f86d7b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

We need to import the 'sys' package since the script has called
sys.exit() method.

Fixes: 6ad7cbc0 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: NKortan <kortanzh@gmail.com>
Reviewed-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.

However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.

This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.

Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.

However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)

The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
Signed-off-by: NAriel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

As opposed to the --diff option, --commit can get ref names instead of
commit hashes.

When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.

However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.

Prevent the user from using HEAD refs.

A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
Signed-off-by: NAriel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>

We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.

But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.

So move the extended-precision divide code to be a regular library
function, just like all the regular division code is.  That way ie is
available regardless of math-emulation.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.

This was marked broken back in 2017 by commit 1883c9f4 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.

There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable.  That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: NUlrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.

For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Signed-off-by: NAndrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.

  $ sudo gdb --args perf stat --iostat  list
  ...
  Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
  50      {
  (gdb) bt
   #0  perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
   #1  0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
      threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
   #2  0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
      at util/evsel.c:2045
   #3  0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
      at util/evsel.c:2065
   #4  0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
      config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
   #5  0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:833
   #6  0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
      at builtin-stat.c:1048
   #7  0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
   #8  0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
      argv=0x7fffffffe4a0) at perf.c:313
   #9  0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
   #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
   #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
  ...
  (gdb) c
  Continuing.
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
  /bin/dmesg | grep -i perf may provide additional information.

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
  166                     if (FD(evsel, cpu, thread) >= 0)

v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
    backward.
Signed-off-by: NIan Rogers <irogers@google.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:

  # perf top --sort comm -g --ignore-callees=do_idle

terminates with:

  #0  0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
  #1  0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
  #2  0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
  #3  hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
  #4  0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
      sample_self=sample_self@entry=true) at util/hist.c:657
  #5  0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
      sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
  #6  0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
      at util/hist.c:1056
  #7  iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
  #8  0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
      at util/hist.c:1231
  #9  0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
      at builtin-top.c:842
  #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
  #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
  #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
  #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
  #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
  #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
  #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
  #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
  #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6

If you look at the frame #2, the code is:

488	 if (he->srcline) {
489          he->srcline = strdup(he->srcline);
490          if (he->srcline == NULL)
491              goto err_rawdata;
492	 }

If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.

Also, if you look at the commit 1fb7d06a, it adds the srcline property
into the struct, but not initializing it everywhere needed.

Committer notes:

Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():

2181         if (al.sym != NULL) {
2182                 if (perf_hpp_list.parent && !*parent &&
2183                     symbol__match_regex(al.sym, &parent_regex))
2184                         *parent = al.sym;
2185                 else if (have_ignore_callees && root_al &&
2186                   symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187                         /* Treat this symbol as the root,
2188                            forgetting its callees. */
2189                         *root_al = al;
2190                         callchain_cursor_reset(cursor);
2191                 }
2192         }

And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:

1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212                          int max_stack_depth, void *arg)
1213 {
1214         int err, err2;
1215         struct map *alm = NULL;
1216
1217         if (al)
1218                 alm = map__get(al->map);
1219
1220         err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221                                         iter->evsel, al, max_stack_depth);
1222         if (err) {
1223                 map__put(alm);
1224                 return err;
1225         }
1226
1227         err = iter->ops->prepare_entry(iter, al);
1228         if (err)
1229                 goto out;
1230
1231         err = iter->ops->add_single_entry(iter, al);
1232         if (err)
1233                 goto out;
1234

That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:

        iter->ops->add_single_entry(iter, al);

will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!
Signed-off-by: NMichael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: NJuri Lelli <jlelli@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

set_print_ip_opts() was not being called when type != attr->type
because there is not a one-to-one relationship between output types
and attr->type. That resulted in ip not printing.

The attr_type() function is removed, and the match of attr->type to
output type is corrected.

Example on ADL using taskset to select an atom cpu:

 # perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname
 Linux
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ]

 Before:

  # perf script | head
         taskset   428 [-01] 10394.179041:          1 cpu_atom/cpu-cycles/:
         taskset   428 [-01] 10394.179043:          1 cpu_atom/cpu-cycles/:
         taskset   428 [-01] 10394.179044:         11 cpu_atom/cpu-cycles/:
         taskset   428 [-01] 10394.179045:        407 cpu_atom/cpu-cycles/:
         taskset   428 [-01] 10394.179046:      16789 cpu_atom/cpu-cycles/:
         taskset   428 [-01] 10394.179052:     676300 cpu_atom/cpu-cycles/:
           uname   428 [-01] 10394.179278:    4079859 cpu_atom/cpu-cycles/:

 After:

  # perf script | head
         taskset   428 10394.179041:          1 cpu_atom/cpu-cycles/:  ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
         taskset   428 10394.179043:          1 cpu_atom/cpu-cycles/:  ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
         taskset   428 10394.179044:         11 cpu_atom/cpu-cycles/:  ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
         taskset   428 10394.179045:        407 cpu_atom/cpu-cycles/:  ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
         taskset   428 10394.179046:      16789 cpu_atom/cpu-cycles/:  ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
         taskset   428 10394.179052:     676300 cpu_atom/cpu-cycles/:      7f829ef73800 cfree+0x0 (/lib/libc-2.32.so)
           uname   428 10394.179278:    4079859 cpu_atom/cpu-cycles/:  ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms])
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NKan Liang <kan.liang@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.

When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.

The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line.  And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.

Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.

Before:
         │    cmpq    %rcx, RIP+8(%rsp)
    0.00 │      cmp    %rcx,0x88(%rsp)
         │    je      .Lerror_bad_iret      <--- Source line
    0.14 │   ┌──je     b4                   <--- Instruction line
         │   │movl    %ecx, %eax

After:
         │    cmpq    %rcx, RIP+8(%rsp)
    0.00 │   ┌──cmp    %rcx,0x88(%rsp)
         │   │je      .Lerror_bad_iret
    0.14 │   ├──je     b4
         │   │movl    %ecx, %eax
Reviewed-by: NJin Yao <yao.jin@linux.intel.com>
Signed-off-by: NRavi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull s390 fixes from Vasily Gorbik:

 - Fix potential out-of-range access during secure boot facility
   detection.

 - Fully validate the VMA before calling follow_pte() in pci code.

 - Remove arch specific WARN_DYNAMIC_STACK config option.

 - Fix zcrypto kernel doc comments.

 - Update defconfigs.

* tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: remove WARN_DYNAMIC_STACK
  s390/ap: fix kernel doc comments
  s390: update defconfigs
  s390/sclp: fix Secure-IPL facility detection
  s390/pci_mmio: fully validate the VMA before calling follow_pte()

Pull devicetree fixes from Rob Herring:

 - Revert fw_devlink tracking 'phy-handle' links. This broke at least a
   few platforms. A better solution is being worked on.

 - Add Samsung UFS binding which fell thru the cracks

 - Doc reference fixes from Mauro

 - Fix for restricted DMA error handling

* tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: arm: Fix Toradex compatible typo
  of: restricted dma: Fix condition for rmem init
  dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference
  dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference
  dt-bindings: ufs: Add bindings for Samsung ufs host
  Revert "of: property: fw_devlink: Add support for "phy-handle" property"

The TGA boards were based on the DECchip 21030 PCI graphics accelerator
used mainly for alpha, and existed in a TURBOchannel (TC) version for
the DECstation (MIPS) workstations.

However, the config option for the TGA code is a bit confused, and says

	depends on FB && (ALPHA || TC)

because people didn't really want to enable the option for random PCI
environments, so the "ALPHA" stands in for that case (while the TC case
is then the MIPS DECstation case).

So that config dependency is kind of a mixture of architecture and bus
choices.  But it's incorrect, in that there were non-PCI-based alpha
hardware, and then the driver just causes warnings:

  drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function]
   1532 | static void tgafb_unregister(struct device *dev)
        |             ^~~~~~~~~~~~~~~~
  drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function]
   1387 | static int tgafb_register(struct device *dev)
        |            ^~~~~~~~~~~~~~

so let's make the config option dependencies a bit more explict:

	depends on FB
	depends on PCI || TC
	depends on ALPHA || TC

where that first "FB" is the software configuration dependency, the
second "PCI || TC" is the hardware bus dependency, while that final
"ALPHA || TC" dependency is the "don't bother asking except for these
situations.

We could make that third case have "COMPILE_TEST" as an option, and mark
the register/unregister functions as __maybe_unused, but I'm not sure
it's really worth it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Jensen IO functions are overly copmplicated because some of the IO
addresses refer to special 'local IO' ports, and they get accessed
differently.

That then makes gcc not actually inline them, and since they were marked
"extern inline" when included through the regular <asm/io.h> path, and
then only marked "inline" when included from sys_jensen.c, you never
necessarily got a body for the IO functions at all.

The intent of the sys_jensen.c code is to actually get the non-inlined
copy generated, so remove the 'inline' from the magic macro that is
supposed to sort this all out.

Also, do not mix 'extern inline' functions (that may or may not be
inlined and will not generate a function body if they are not) with
'static inline' (that _will_ generate a function body when not inlined).
Because gcc will complain about this situation:

   error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static

because gcc basically doesn't know whether to generate a body for that
static inline function or not for that call site.

So make all of these use that __EXTERN_INLINE marker.  Gcc will
generally not inline these things on use, and then generate the function
body out-of-line in sys_jensen.c.

This makes the core IO functions build for the alpha Jensen config.

Not that the rest then builds, because it turns out Jensen also doesn't
enable PCI, which then makes other drievrs very unhappy, but that's a
separate issue.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in

  drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
   1200 | static int tegra_slink_runtime_resume(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
   1188 | static int tegra_slink_runtime_suspend(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~

mark the functions __maybe_unused to make the build happy.

This hits the alpha allmodconfig build (and others).
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix board compatible typo reported by dtbs_check.

Fixes: f4d1577e ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: NDavid Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.czSigned-off-by: NRob Herring <robh@kernel.org>

of_dma_set_restricted_buffer fails to handle negative return values from
of_property_count_elems_of_size, e.g. when the property does not exist.
This results in an attempt to assign a non-existent reserved memory
region to the device and a warning being printed. Fix the condition to
take negative values into account.

Fixes: f3cfd136 ("of: restricted dma: Don't fail device probe on rmem init failure")
Cc: Will Deacon <will@kernel.org>
Signed-off-by: NDavid Brazdil <dbrazdil@google.com>
Acked-by: NWill Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210917131423.2760155-1-dbrazdil@google.comSigned-off-by: NRob Herring <robh@kernel.org>

Pull power management fixes from Rafael Wysocki:
 "These fix two cpufreq issues, one in the intel_pstate driver and one
  in the core.

  Specifics:

   - Prevent intel_pstate from avoiding to use HWP, even if instructed
     to do so via the kernel command line, when HWP has been enabled
     already by the platform firmware (Doug Smythies).

   - Prevent use-after-free from occurring in the schedutil cpufreq
     governor on exit by fixing a core helper function that attempts to
     access memory associated with a kobject after calling kobject_put()
     on it (James Morse)"

* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
  cpufreq: intel_pstate: Override parameters if HWP forced by BIOS

Pull dma-mapping fixes from Christoph Hellwig:

 - page align size in sparc32 arch_dma_alloc (Andreas Larsson)

 - tone down a new dma-debug message (Hamza Mahfooz)

 - fix the kerneldoc for dma_map_sg_attrs (me)

* tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping:
  sparc32: page align size in arch_dma_alloc
  dma-debug: prevent an error message from causing runtime problems
  dma-mapping: fix the kerneldoc for dma_map_sg_attrs

Pull PCI fixes from Bjorn Helgaas:

 - Defer VPD sizing until we actually need the contents; fixes a
   boot-time slowdown reported by Dave Jones (Bjorn Helgaas)

 - Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a
   virtio-iommu boot regression (Jean-Philippe Brucker)

 - Add AMD GPU multi-function power dependencies; fixes runtime power
   management, including GPU resume and temp and fan sensor issues (Evan
   Quan)

 - Update VMD maintainer to Nirmal Patel (Jon Derrick)

* tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add Nirmal Patel as VMD maintainer
  PCI: Add AMD GPU multi-function power dependencies
  PCI/ACPI: Don't reset a fwnode set by OF
  PCI/VPD: Defer VPD sizing until first access

Pull io_uring iov_iter retry fixes from Jens Axboe:
 "This adds a helper to save/restore iov_iter state, and modifies
  io_uring to use it.

  After that is done, we can now kill the iter->truncated addition that
  we added for this release. The io_uring change is being overly
  cautious with the save/restore/advance, but better safe than sorry and
  we can always improve that and reduce the overhead if it proves to be
  of concern. The only case to be worried about in this regard is huge
  IO, where iteration can take a while to iterate segments.

  I spent some time writing test cases, and expanded the coverage quite
  a bit from the last posting of this. liburing carries this regression
  test case now:

      https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c

  which exercises all of this. It now also supports provided buffers,
  and explicitly tests for end-of-file/device truncation as well.

  On top of that, Pavel sanitized the IOPOLL retry path to follow the
  exact same pattern as normal IO"

* tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block:
  io_uring: move iopoll reissue into regular IO path
  Revert "iov_iter: track truncated size"
  io_uring: use iov_iter state save/restore helpers
  iov_iter: add helper to save iov_iter state