- 18 7月, 2011 4 次提交
-
-
由 Trond Myklebust 提交于
Allow the number of available slots to grow with the TCP window size. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This throttles the allocation of new slots when the socket is busy reconnecting and/or is out of buffer space. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 7月, 2011 2 次提交
-
-
由 J. Bruce Fields 提交于
Embed the necessary alias into the module rather than waiting for someone to add it to /etc/modprobe.conf Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Somebody working on this code asked what the deal was with NFSv4, since this comment notes that it's v2/v3's statelessness that requires sillyrename. Shouldn't hurt to document the answer. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 7月, 2011 11 次提交
-
-
由 Trond Myklebust 提交于
This is not part of an external ABI... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that the backchannel exports conform to the existing sunrpc practice. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Change explicit references to CONFIG_NFS_V4_1 to implicit ones Get rid of the unnecessary defines in backchannel_rqst.c and bc_svc.c: the Makefile takes care of those dependency. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of completely reinitialising the struct nfs_pageio_descriptor. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in differences in block sizes when falling back to write through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we recoalese to take into account differences in block sizes when falling back to read through the MDS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If an attempt to do pNFS fails, and we have to fall back to writing through the MDS, then we may want to re-coalesce the requests that we already have since the block size for the MDS read/writes may be different to that of the DS read/writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Instead of looking up the rsize and wsize, the routines that generate the RPC requests should really be using the pg_bsize, since that is what we use when deciding whether or not to coalesce write requests... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and do the same for nfs_flush_multi/one. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 7月, 2011 23 次提交
-
-
由 Trond Myklebust 提交于
Split them up into two parts: one which sets up the struct nfs_read/write_data, the other which sets up the actual RPC call or pNFS call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we're writing back data, and the FLUSH_STABLE flag is set, then we always want to use NFS_FILE_SYNC, since we're always in a situation where we're doing page reclaim, and so we want to free up the page as quickly as possible. If we're in the FLUSH_COND_STABLE case, then we either want to use another unstable write (if we have to do a commit anyway) or again, we want to use NFS_FILE_SYNC because we know that we have no more pages to write out. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Mark all deviceids established under an expired MDS clientid as invalid. Stop all new i/o through DS and send through the MDS. Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts established under the expired MDS clientid. Remove the MDS clientid deviceid and data servers reference Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Since we take a reference to it, we really ought to pass the a pointer to the layout header in the arguments instead of assuming that NFS_I(inode)->layout will forever point to the correct object. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Boaz Harrosh 提交于
* Some leftovers from ancient times. * This file will only define common types and client API. Remove server from comments Signed-off-by: Boaz Harrosh <Boaz Harrosh bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Ask for whole file layouts. Until support for layout segments is fully supported in the file layout code, discard non-whole file layouts. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The fact that the global device id cache holds a reference to the nfs4_deviceid_node until it is invisible to rcu lookups implies that we can always assume that the reference count is non-zero in _find_get_deviceid. Also clean up nfs4_put_deviceid_node and the removal of the device id from the cache. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we always get a layout before setting up the i/o request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to ensure that the layouts are set up before we can decide to coalesce requests. To do so, we want to further split up the struct nfs_pageio_descriptor operations into an initialisation callback, a coalescing test callback, and a 'do i/o' callback. This patch cleans up the existing callback methods before adding the 'initialisation' callback. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
When recovering open files and locks, the stateid should be tested against the server and freed if it is invalid. This patch adds new recovery functions for NFS v4.1. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
FREE_STATEID is used to tell the server that we want to free a stateid that no longer has any locks associated with it. This allows the client to reclaim locks without encountering edge conditions documented in section 8.4.3 of RFC 5661. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch adds in the xdr for doing a TEST_STATEID call with a single stateid. RFC 5661 allows multiple stateids to be tested in a single call, but only testing one keeps things simpler for now. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find the secflavor for the initial mount. If the server doesn't support SECINFO_NO_NAME then I fall back on the "guess and check" method used for v4.0 mounts. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
Layouts should be tracked per nfs_server (aka superblock) instead of per struct nfs_client, which may have multiple FSIDs associated with it. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
We support IPv4 and IPv6 now. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
can be skipped if the "eir_server_scope" from the exchange_id proc differs from previous calls. Also, in the future server_scope will be useful for determining whether client trunking is available Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
Don't just use the first addr in the multipath list - instead, loop over addresses when calling nfs4_set_ds_client() (which calls connect) until it is successful. Although this is not real multipath support, it's a quick fix to handle when an MDS sends a list of addresses for a DS and some of the addr families are unsupported or misconfigured (like no routable ipv6 addr assigned). This will attempt all paths to the DS before giving up, instead of immediately falling back to the MDS. As before, an error encountered after a successful connect() will cause all i/o to fall back to the MDS. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
This parses and stores all addresses associated with each data server, laying the groundwork for supporting multipath to data servers. - Skips over addresses that cannot be parsed (ie IPv6 addrs if v6 is not enabled). Only fails if none of the addresses are recognizable - Currently only uses the first address that parsed cleanly - Tested against pynfs server (modified to support multipath) Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
Handle ipv6 remote addresses from GETDEVICEINFO - supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies - added ds_remotestr to avoid having to handle different AFs in every dprintk - tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs - tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to refuse to accept IPv6 addresses Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Vasily Averin 提交于
lockd: server returns status 50331648 it's quite hard to understand that number in this message is 3 in big endian Signed-off-by: NVasily Averin <vvs@sw.ru> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Vasily Averin 提交于
common dprint_status() macro is used in all callbacks but not in call_decode() Signed-off-by: NVasily Averin <vvs@sw.ru> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ben Greear 提交于
Because struct rpcbind_args *map was declared static, if two threads entered this method at the same time, the values assigned to map could be sent two two differen tasks. This could cause all sorts of problems, include use-after-free and double-free of memory. Fix this by removing the static declaration so that the map pointer is on the stack. Signed-off-by: NBen Greear <greearb@candelatech.com> Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-