Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a2 for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

Pull staging tree update from Greg Kroah-Hartman:
 "Here is the big staging tree update for the 3.7-rc1 merge window.

  There are a few patches in here that are outside of the staging area,
  namely HID and IIO patches, but all of them have been acked by the
  relevant subsystem maintainers.  The IIO stuff is still coming in
  through this tree as it hasn't entirely moved out of the staging tree,
  but is almost there.

  Other than that, there wa a ton of work on the comedi drivers to make
  them more readable and the correct style.  Doing that removed a lot of
  code, but we added a new driver to the staging tree, so we didn't end
  up with a net reduction this time around:

   662 files changed, 51649 insertions(+), 26582 deletions(-)

  All of these patches have been in the linux-next tree already.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
  staging: comedi: jr3_pci: fix iomem dereference
  staging: comedi: drivers: use comedi_fc.h cmdtest helpers
  Staging: winbond: usb_free_urb(NULL) is safe
  Staging: winbond: checkpatch cleanup
  Staging: winbond: Removed undesired spaces, lines and tabs
  Staging: winbond: Typo corrections in comments
  Staging: winbond: Changed c99 comments to c89 comments
  staging: r8712u: Do not queue cloned skb
  staging: comedi: ni_mio_common: always lock in ni_ai_poll()
  staging: comedi: s626: add FIXME comment
  staging: comedi: s626: don't dereference insn->data
  staging: comedi: s526: fix if() check in s526_gpct_winsn()
  staging: comedi: s626: cleanup comments in s626_initialize()
  staging: comedi: s626: remove clear of kzalloc'ed data
  staging: comedi: s626: remove 'WDInterval' from private data
  staging: comedi: s626: remove 'ChargeEnabled' from private data
  staging: comedi: s626: remove 'IsBoardRevA' comment
  staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
  staging: comedi: s626: remove 'allocatedBuf' from private data
  staging: comedi: s626: add final attach message
  ...

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...

Pull char/misc driver merge from Greg Kroah-Hartman:
 "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
  window.

  Nothing major, just a number of driver updates and fixes, all of which
  have been in the linux-next releases for a while now either in my
  tree, or in Andrew's (the lis3l driver changes came from his tree last
  week).

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits)
  drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d: remove lis3lv02d driver DT init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code
  drivers/misc/lis3lv02d: add generic DT matching code
  lis3lv02d: fix some comments specific to lis331dlh driver
  MISC: hpilo, remove pci_disable_device
  pcmcia: synclink_cs: fix potential tty NULL dereference
  drivers/char/mmtimer.c: Remove useless kfree
  drivers/char: removes unnecessary semicolon
  char/misc: remove CONFIG_EXPERIMENTAL dependencies
  mei: don't print buffer as a string
  mei: struct mei_message_data doesn't have to be packed
  mei: add error messages for open count errors
  misc: use module_spi_driver
  tifm: use module_pci_driver
  misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
  mei: add lynx point pci device ids
  mei: fix max number of open handles
  mei: rename struct pci_dev *mei_device to mei_pdev
  ...

Pull clk framework update from Michael Turquette:
 "The common clk framework changes for 3.7 are dominated by ARM platform
  ports to the framework along with one MIPS port, one MFD port, one
  minor framework enhancement and one helper function for platforms
  expressing their clock data through device tree."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: add of_clk_src_onecell_get() support
  clk: ux500: Define smp_twd clock for u8500
  mfd: dbx500: Provide a more accurate smp_twd clock
  clk: ux500: Support for prmcu_rate clock
  clk: Provide option for clk_get_rate to issue hw for new rate
  clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
  ARM: ux500: Switch to use common clock framework
  clk: ux500: Clock definitions for u8500
  clk: ux500: First version of clock definitions for ux500
  clk: ux500: Adapt PRCMU and PRCC clocks for common clk
  clk: versatile: make config option boolean
  clk: add Loongson1B clock support
  arm: mmp: make all SOCs use common clock by default
  clk: mmp: add clock definition for mmp2
  clk: mmp: add clock definition for pxa910
  clk: mmp: add clock definition for pxa168
  clk: mmp: add mmp specific clocks
  clk: convert ARM RealView to common clk
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
    - Clear host bridge resource info to avoid issue when releasing
      (Yinghai Lu)
    - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
    - Use standard list ops for acpi_pci_drivers (Jiang Liu)

  Device hotplug
    - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang
      Liu)
    - Remove fakephp driver (Bjorn Helgaas)
    - Fix VGA ref count in hotplug remove path (Yinghai Lu)
    - Allow acpiphp to handle PCIe ports without native hotplug (Jiang
      Liu)
    - Implement resume regardless of pciehp_force param (Oliver Neukum)
    - Make pci_fixup_irqs() work after init (Thierry Reding)

  Miscellaneous
    - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
    - Factor out PCI Express Capability accessors (Jiang Liu)
    - Add pcibios_window_alignment() so powerpc EEH can use generic
      resource assignment (Gavin Shan)
    - Make pci_error_handlers const (Stephen Hemminger)
    - Cleanup drivers/pci/remove.c (Bjorn Helgaas)
    - Improve Vendor-Specific Extended Capability support (Bjorn
      Helgaas)
    - Use standard list ops for bus->devices (Bjorn Helgaas)
    - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
    - Reassign invalid bus number ranges (Intel DP43BF workaround)
      (Yinghai Lu)"

* tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits)
  PCI: acpiphp: Handle PCIe ports without native hotplug capability
  PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots
  PCI/ACPI: Protect acpi_pci_roots list with mutex
  PCI/ACPI: Use acpi_pci_root info rather than looking it up again
  PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface
  PCI/ACPI: Protect acpi_pci_drivers list with mutex
  PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges
  PCI/ACPI: Use normal list for struct acpi_pci_driver
  PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots
  PCI: Fix default vga ref_count
  ia64/PCI: Clear host bridge aperture struct resource
  x86/PCI: Clear host bridge aperture struct resource
  PCI: Stop all children first, before removing all children
  Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
  PCI: Provide a default pcibios_update_irq()
  PCI: Discard __init annotations for pci_fixup_irqs() and related functions
  PCI: Use correct type when freeing bus resource list
  PCI: Check P2P bridge for invalid secondary/subordinate range
  PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes
  xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()
  ...

Pull arm64 support from Catalin Marinas:
 "Linux support for the 64-bit ARM architecture (AArch64)

  Features currently supported:
   - 39-bit address space for user and kernel (each)
   - 4KB and 64KB page configurations
   - Compat (32-bit) user applications (ARMv7, EABI only)
   - Flattened Device Tree (mandated for all AArch64 platforms)
   - ARM generic timers"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
  arm64: ptrace: remove obsolete ptrace request numbers from user headers
  arm64: Do not set the SMP/nAMP processor bit
  arm64: MAINTAINERS update
  arm64: Build infrastructure
  arm64: Miscellaneous header files
  arm64: Generic timers support
  arm64: Loadable modules
  arm64: Miscellaneous library functions
  arm64: Performance counters support
  arm64: Add support for /proc/sys/debug/exception-trace
  arm64: Debugging support
  arm64: Floating point and SIMD
  arm64: 32-bit (compat) applications support
  arm64: User access library functions
  arm64: Signal handling support
  arm64: VDSO support
  arm64: System calls handling
  arm64: ELF definitions
  arm64: SMP support
  arm64: DMA mapping API
  ...

Pull s390 updates from Martin Schwidefsky:
 "The main new feature is machine support for System zEC12 including
  transactional memory, runtime instrumentation, support for scm block
  devices via eadm subchannels, and support for CEX4 crypto cards.

  In addition there are some nice improvements: bpf jit compiler, arch
  backend for cmpxchg_double, relative exception table entries, dasd
  partition detection independent from the dasd driver ioctls, and cpu
  cache information in /proc/cpuinfo and /sys/device/cpu.

  And last but not least a series of cleanup patches from Heiko."

Fix up trivial add-add conflict in arch/s390/Kconfig due to commit
b952741c ("cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING")

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (76 commits)
  s390: update defconfig
  s390/jump label,nss: let shared kernel support depend on !JUMP_LABEL
  s390/disassembler: fix decoding of risblg instruction
  s390/bpf,jit: add support for BPF_S_ANC_ALU_XOR_X instruction
  s390/traps: move call to print_modules() out of show_regs()
  s390/mm: mark free_initrd_mem() as __init
  s390/dasd: check count address during online setting
  drivers/s390/char/monreader.c: fix error return code
  s390/cmpxchg,percpu: implement cmpxchg_double()
  s390/percpu: implement this_cpu_add_return()
  s390/percpu: implement this_cpu_xchg()
  s390/kexec: remove CONFIG_KEXEC
  s390/irq: use designated initializers for irq class array
  s390: add uninitialized_var() to suppress false positive compiler warnings
  s390/crashdump: move fill_cpu_elf_notes() prototype to header file
  s390/process: add missing header include
  s390/ptrace: add missing ifdef
  s390/ipl,decrompressor: disable branch profiling
  s390/perf_events: compile only for CONFIG_64BIT
  s390/tape: remove even more tape block leftovers
  ...

Pull x86/microcode changes from Ingo Molnar:
 "The biggest changes are to AMD microcode patching: add code for
  caching all microcode patches which belong to the current family on
  which we're running, in the kernel.

  We look up the patch needed for each core from the cache at
  patch-application time instead of holding a single patch per-system"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Fix use after free in free_cache()
  x86, microcode, AMD: Rewrite patch application procedure
  x86, microcode, AMD: Add a small, per-family patches cache
  x86, microcode, AMD: Add reverse equiv table search
  x86, microcode: Add a refresh firmware flag to ->request_microcode_fw
  x86, microcode, AMD: Read CPUID(1).EAX on the correct cpu
  x86, microcode, AMD: Check before applying a patch
  x86, microcode, AMD: Remove useless get_ucode_data wrapper
  x86, microcode: Straighten out Kconfig text
  x86, microcode: Cleanup cpu hotplug notifier callback
  x86, microcode: Drop uci->mc check on resume path
  x86, microcode: Save an indentation level in reload_for_cpu

Pull x86/platform changes from Ingo Molnar:
 "This cleans up some Xen-induced pagetable init code uglies, by
  generalizing new platform callbacks and state: x86_init.paging.*"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Document x86_init.paging.pagetable_init()
  x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done()
  x86: Move paging_init() call to x86_init.paging.pagetable_init()
  x86: Rename pagetable_setup_start() to pagetable_init()
  x86: Remove base argument from x86_init.paging.pagetable_setup_start

Pull x86/mm changes from Ingo Molnar:
 "The biggest change is new TLB partial flushing code for AMD CPUs.
  (The v3.6 kernel had the Intel CPU side code, see commits
  e0ba94f1..effee4b9.)

  There's also various other refinements around the TLB flush code"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Distinguish TLB shootdown interrupts from other functions call interrupts
  x86/mm: Fix range check in tlbflush debugfs interface
  x86, cpu: Preset default tlb_flushall_shift on AMD
  x86, cpu: Add AMD TLB size detection
  x86, cpu: Push TLB detection CPUID check down
  x86, cpu: Fixup tlb_flushall_shift formatting

Pull x86/MCE update from Ingo Molnar:
 "Various MCE robustness enhancements.

  One of the changes adds CMCI (Corrected Machine Check Interrupt) poll
  mode on Intel Nehalem+ CPUs, which mode is automatically entered when
  the rate of messages is too high - and exited once the storm is over.

  An MCE events storm will roughly look like this:

   [ 5342.740616] mce: [Hardware Error]: Machine check events logged
   [ 5342.746501] mce: [Hardware Error]: Machine check events logged
   [ 5342.757971] CMCI storm detected: switching to poll mode
   [ 5372.674957] CMCI storm subsided: switching to interrupt mode

  This should make such events more survivable"

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Provide boot argument to honour bios-set CMCI threshold
  x86, MCE: Remove unused defines
  x86, mce: Enable MCA support by default
  x86/mce: Add CMCI poll mode
  x86/mce: Make cmci_discover() quiet
  x86: mce: Remove the frozen cases in the hotplug code
  x86: mce: Split timer init
  x86: mce: Serialize mce injection
  x86: mce: Disable preemption when calling raise_local()

Pull x86/fpu update from Ingo Molnar:
 "The biggest change is the addition of the non-lazy (eager) FPU saving
  support model and enabling it on CPUs with optimized xsaveopt/xrstor
  FPU state saving instructions.

  There are also various Sparse fixes"

Fix up trivial add-add conflict in arch/x86/kernel/traps.c

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: fix kvm's usage of kernel_fpu_begin/end()
  x86, fpu: remove cpu_has_xmm check in the fx_finit()
  x86, fpu: make eagerfpu= boot param tri-state
  x86, fpu: enable eagerfpu by default for xsaveopt
  x86, fpu: decouple non-lazy/eager fpu restore from xsave
  x86, fpu: use non-lazy fpu restore for processors supporting xsave
  lguest, x86: handle guest TS bit for lazy/non-lazy fpu host models
  x86, fpu: always use kernel_fpu_begin/end() for in-kernel FPU usage
  x86, kvm: use kernel_fpu_begin/end() in kvm_load/put_guest_fpu()
  x86, fpu: remove unnecessary user_fpu_end() in save_xstate_sig()
  x86, fpu: drop_fpu() before restoring new state from sigframe
  x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels
  x86, fpu: Consolidate inline asm routines for saving/restoring fpu state
  x86, signal: Cleanup ifdefs and is_ia32, is_x32

Pull x86/EFI changes from Ingo Molnar:
 "EFI loader robustness enhancements plus smaller fixes"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix the ACPI BGRT driver for images located in EFI boot services memory
  efi: Add a function to look up existing IO memory mappings
  efi: Defer freeing boot services memory until after ACPI init
  x86, EFI: Calculate the EFI framebuffer size instead of trusting the firmware
  efifb: Skip DMI checks if the bootloader knows what it's doing
  efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable
  efi: Build EFI stub with EFI-appropriate options
  X86: Improve GOP detection in the EFI boot stub

Pull x86 debug update from Ingo Molnar:
 "Various small enhancements"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Dump family, model, stepping of the boot CPU
  x86/iommu: Use NULL instead of plain 0 for __IOMMU_INIT
  x86/iommu: Drop duplicate const in __IOMMU_INIT
  x86/fpu/xsave: Keep __user annotation in casts
  x86/pci/probe_roms: Add missing __iomem annotation to pci_map_biosrom()
  x86/signals: ia32_signal.c: add __user casts to fix sparse warnings
  x86/vdso: Add __user annotation to VDSO32_SYMBOL
  x86: Fix __user annotations in asm/sys_ia32.h

Merge branches 'x86-cpu-for-linus' and 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/cpu and x86/cpufeature from Ingo Molnar:
 "One tiny cleanup, and prepare for SMAP (Supervisor Mode Access
  Prevention) support on x86"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Remove the useless branch in c_start()

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpufeature: Add feature bit for SMAP

Pull x86/cleanups from Ingo Molnar:
 "Smaller cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch/x86: Remove unecessary semicolons
  x86, boot: Remove obsolete and unused constant RAMDISK

Pull x86/build changes from Ingo Molnar:
 "defconfig and kconfig cleanups/fixes"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Clean up Kconfig defaults
  x86/Kconfig: Turn off DEBUG_NX_TEST module in defconfigs
  x86/Kconfig: Turn off CONFIG_BLK_DEV_RAM
  x86/Kconfig: Disable CONFIG_CRC_T10DIF in defconfigs
  x86/Kconfig: Switch to ext4 in defconfigs
  x86/Kconfig: Update defconfigs to current results of "make savedefconfig"

Pull x86/asm changes from Ingo Molnar:
 "The one change that stands out is the alternatives patching change
  that prevents us from ever patching back instructions from SMP to UP:
  this simplifies things and speeds up CPU hotplug.

  Other than that it's smaller fixes, cleanups and improvements."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Unspaghettize do_trap()
  x86_64: Work around old GAS bug
  x86: Use REP BSF unconditionally
  x86: Prefer TZCNT over BFS
  x86/64: Adjust types of temporaries used by ffs()/fls()/fls64()
  x86: Drop unnecessary kernel_eflags variable on 64-bit
  x86/smp: Don't ever patch back to UP if we unplug cpus

Pull x86/apic changes from Ingo Molnar:
 "Smaller fixes and cleanups"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/api: Rename mp_register_lapic in a comment
  x86/irq/i8259: Fix incorrect comment
  x86: dt: Use linear irq domain for ioapic(s)

Pull timer changes from Ingo Molnar:
 "Timer enhancements, generalizations and cleanups from Tejun Heo, in
  preparation for workqueue facility enhancements."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Implement TIMER_IRQSAFE
  timer: Clean up timer initializers
  timer: Relocate declarations of init_timer_on_stack_key()
  timer: Generalize timer->base flags handling

Pull scheduler changes from Ingo Molnar:
 "Continued quest to clean up and enhance the cputime code by Frederic
  Weisbecker, in preparation for future tickless kernel features.

  Other than that, smallish changes."

Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  cputime: Make finegrained irqtime accounting generally available
  cputime: Gather time/stats accounting config options into a single menu
  ia64: Reuse system and user vtime accounting functions on task switch
  ia64: Consolidate user vtime accounting
  vtime: Consolidate system/idle context detection
  cputime: Use a proper subsystem naming for vtime related APIs
  sched: cpu_power: enable ARCH_POWER
  sched/nohz: Clean up select_nohz_load_balancer()
  sched: Fix load avg vs. cpu-hotplug
  sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix nohz_idle_balance()
  sched: Remove useless code in yield_to()
  sched: Add time unit suffix to sched sysctl knobs
  sched/debug: Limit sd->*_idx range on sysctl
  sched: Remove AFFINE_WAKEUPS feature flag
  s390: Remove leftover account_tick_vtime() header
  cputime: Consolidate vtime handling on context switch
  sched: Move cputime code to its own file
  cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING
  tile: Remove SD_PREFER_LOCAL leftover
  ...

Pull perf fix from Ingo Molnar:
 "Leftover perf/urgent fix from the v3.6 cycle"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix typo in uncore_pmu_to_box

Pull perf update from Ingo Molnar:
 "Lots of changes in this cycle as well, with hundreds of commits from
  over 30 contributors.  Most of the activity was on the tooling side.

  Higher level changes:

   - New 'perf kvm' analysis tool, from Xiao Guangrong.

   - New 'perf trace' system-wide tracing tool

   - uprobes fixes + cleanups from Oleg Nesterov.

   - Lots of patches to make perf build on Android out of box, from
     Irina Tirdea

   - Extend ftrace function tracing utility to be more dynamic for its
     users.  It allows for data passing to the callback functions, as
     well as reading regs as if a breakpoint were to trigger at function
     entry.

     The main goal of this patch series was to allow kprobes to use
     ftrace as an optimized probe point when a probe is placed on an
     ftrace nop.  With lots of help from Masami Hiramatsu, and going
     through lots of iterations, we finally came up with a good
     solution.

   - Add cpumask for uncore pmu, use it in 'stat', from Yan, Zheng.

   - Various tracing updates from Steve Rostedt

   - Clean up and improve 'perf sched' performance by elliminating lots
     of needless calls to libtraceevent.

   - Event group parsing support, from Jiri Olsa

   - UI/gtk refactorings and improvements from Namhyung Kim

   - Add support for non-tracepoint events in perf script python, from
     Feng Tang

   - Add --symbols to 'script', similar to the one in 'report', from
     Feng Tang.

  Infrastructure enhancements and fixes:

   - Convert the trace builtins to use the growing evsel/evlist
     tracepoint infrastructure, removing several open coded constructs
     like switch like series of strcmp to dispatch events, etc.
     Basically what had already been showcased in 'perf sched'.

   - Add evsel constructor for tracepoints, that uses libtraceevent just
     to parse the /format events file, use it in a new 'perf test' to
     make sure the libtraceevent format parsing regressions can be more
     readily caught.

   - Some strange errors were happening in some builds, but not on the
     next, reported by several people, problem was some parser related
     files, generated during the build, didn't had proper make deps, fix
     from Eric Sandeen.

   - Introduce struct and cache information about the environment where
     a perf.data file was captured, from Namhyung Kim.

   - Fix handling of unresolved samples when --symbols is used in
     'report', from Feng Tang.

   - Add union member access support to 'probe', from Hyeoncheol Lee.

   - Fixups to die() removal, from Namhyung Kim.

   - Render fixes for the TUI, from Namhyung Kim.

   - Don't enable annotation in non symbolic view, from Namhyung Kim.

   - Fix pipe mode in 'report', from Namhyung Kim.

   - Move related stats code from stat to util/, will be used by the
     'stat' kvm tool, from Xiao Guangrong.

   - Remove die()/exit() calls from several tools.

   - Resolve vdso callchains, from Jiri Olsa

   - Don't pass const char pointers to basename, so that we can
     unconditionally use libgen.h and thus avoid ifdef BIONIC lines,
     from David Ahern

   - Refactor hist formatting so that it can be reused with the GTK
     browser, From Namhyung Kim

   - Fix build for another rbtree.c change, from Adrian Hunter.

   - Make 'perf diff' command work with evsel hists, from Jiri Olsa.

   - Use the only field_sep var that is set up: symbol_conf.field_sep,
     fix from Jiri Olsa.

   - .gitignore compiled python binaries, from Namhyung Kim.

   - Get rid of die() in more libtraceevent places, from Namhyung Kim.

   - Rename libtraceevent 'private' struct member to 'priv' so that it
     works in C++, from Steven Rostedt

   - Remove lots of exit()/die() calls from tools so that the main perf
     exit routine can take place, from David Ahern

   - Fix x86 build on x86-64, from David Ahern.

   - {int,str,rb}list fixes from Suzuki K Poulose

   - perf.data header fixes from Namhyung Kim

   - Allow user to indicate objdump path, needed in cross environments,
     from Maciek Borzecki

   - Fix hardware cache event name generation, fix from Jiri Olsa

   - Add round trip test for sw, hw and cache event names, catching the
     problem Jiri fixed, after Jiri's patch, the test passes
     successfully.

   - Clean target should do clean for lib/traceevent too, fix from David
     Ahern

   - Check the right variable for allocation failure, fix from Namhyung
     Kim

   - Set up evsel->tp_format regardless of evsel->name being set
     already, fix from Namhyung Kim

   - Oprofile fixes from Robert Richter.

   - Remove perf_event_attr needless version inflation, from Jiri Olsa

   - Introduce libtraceevent strerror like error reporting facility,
     from Namhyung Kim

   - Add pmu mappings to perf.data header and use event names from cmd
     line, from Robert Richter

   - Fix include order for bison/flex-generated C files, from Ben
     Hutchings

   - Build fixes and documentation corrections from David Ahern

   - Assorted cleanups from Robert Richter

   - Let O= makes handle relative paths, from Steven Rostedt

   - perf script python fixes, from Feng Tang.

   - Initial bash completion support, from Frederic Weisbecker

   - Allow building without libelf, from Namhyung Kim.

   - Support DWARF CFI based unwind to have callchains when %bp based
     unwinding is not possible, from Jiri Olsa.

   - Symbol resolution fixes, while fixing support PPC64 files with an
     .opt ELF section was the end goal, several fixes for code that
     handles all architectures and cleanups are included, from Cody
     Schafer.

   - Assorted fixes for Documentation and build in 32 bit, from Robert
     Richter

   - Cache the libtraceevent event_format associated to each evsel
     early, so that we avoid relookups, i.e.  calling pevent_find_event
     repeatedly when processing tracepoint events.

     [ This is to reduce the surface contact with libtraceevents and
        make clear what is that the perf tools needs from that lib: so
        far parsing the common and per event fields.  ]

   - Don't stop the build if the audit libraries are not installed, fix
     from Namhyung Kim.

   - Fix bfd.h/libbfd detection with recent binutils, from Markus
     Trippelsdorf.

   - Improve warning message when libunwind devel packages not present,
     from Jiri Olsa"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
  perf trace: Add aliases for some syscalls
  perf probe: Print an enum type variable in "enum variable-name" format when showing accessible variables
  perf tools: Check libaudit availability for perf-trace builtin
  perf hists: Add missing period_* fields when collapsing a hist entry
  perf trace: New tool
  perf evsel: Export the event_format constructor
  perf evsel: Introduce rawptr() method
  perf tools: Use perf_evsel__newtp in the event parser
  perf evsel: The tracepoint constructor should store sys:name
  perf evlist: Introduce set_filter() method
  perf evlist: Renane set_filters method to apply_filters
  perf test: Add test to check we correctly parse and match syscall open parms
  perf evsel: Handle endianity in intval method
  perf evsel: Know if byte swap is needed
  perf tools: Allow handling a NULL cpu_map as meaning "all cpus"
  perf evsel: Improve tracepoint constructor setup
  tools lib traceevent: Fix error path on pevent_parse_event
  perf test: Fix build failure
  trace: Move trace event enable from fs_initcall to core_initcall
  tracing: Add an option for disabling markers
  ...

Pull trivial irq core update from Ingo Molnar:
 "Two symbol exports for modular irq-chip drivers"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Export dummy_irq_chip
  genirq: Export irq_set_chip_and_handler_name()

Pull core locking changes from Ingo Molnar:
 "It includes a lockdep improvement plus a spinlock inlining Kconfig
  cleanup."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking: Adjust spin lock inlining Kconfig options
  lockdep: Check if nested lock is actually held

Pull core kernel fixes from Ingo Molnar:
 "This is a complex task_work series from Oleg that fixes the bug that
  this VFS commit tried to fix:

    d35abdb2 hold task_lock around checks in keyctl

  but solves the problem without the lockup regression that d35abdb2
  introduced in v3.6.

  This series came late in v3.6 and I did not feel confident about it so
  late in the cycle.  Might be worth backporting to -stable if it proves
  itself upstream."

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  task_work: Simplify the usage in ptrace_notify() and get_signal_to_deliver()
  task_work: Revert "hold task_lock around checks in keyctl"
  task_work: task_work_add() should not succeed after exit_task_work()
  task_work: Make task_work_add() lockless

Pull RCU changes from Ingo Molnar:

 0. 'idle RCU':

     Adds RCU APIs that allow non-idle tasks to enter RCU idle mode and
     provides x86 code to make use of them, allowing RCU to treat
     user-mode execution as an extended quiescent state when the new
     RCU_USER_QS kernel configuration parameter is specified.  (Work is
     in progress to port this to a few other architectures, but is not
     part of this series.)

 1.  A fix for a latent bug that has been in RCU ever since the addition
     of CPU stall warnings.  This bug results in false-positive stall
     warnings, but thus far only on embedded systems with severely
     cut-down userspace configurations.

 2.  Further reductions in latency spikes for huge systems, along with
     additional boot-time adaptation to the actual hardware.

     This is a large change, as it moves RCU grace-period initialization
     and cleanup, along with quiescent-state forcing, from softirq to a
     kthread.  However, it appears to be in quite good shape (famous
     last words).

 3.  Updates to documentation and rcutorture, the latter category
     including keeping statistics on CPU-hotplug latencies and fixing
     some initialization-time races.

 4.  CPU-hotplug fixes and improvements.

 5.  Idle-loop fixes that were omitted on an earlier submission.

 6.  Miscellaneous fixes and improvements

In certain RCU configurations new kernel threads will show up (rcu_bh,
rcu_sched), showing RCU processing overhead.

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
  rcu: Apply micro-optimization and int/bool fixes to RCU's idle handling
  rcu: Userspace RCU extended QS selftest
  x86: Exit RCU extended QS on notify resume
  x86: Use the new schedule_user API on userspace preemption
  rcu: Exit RCU extended QS on user preemption
  rcu: Exit RCU extended QS on kernel preemption after irq/exception
  x86: Exception hooks for userspace RCU extended QS
  x86: Unspaghettize do_general_protection()
  x86: Syscall hooks for userspace RCU extended QS
  rcu: Switch task's syscall hooks on context switch
  rcu: Ignore userspace extended quiescent state by default
  rcu: Allow rcu_user_enter()/exit() to nest
  rcu: Settle config for userspace extended quiescent state
  rcu: Make RCU_FAST_NO_HZ handle adaptive ticks
  rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIs
  rcu: New rcu_user_enter() and rcu_user_exit() APIs
  ia64: Add missing RCU idle APIs on idle loop
  xtensa: Add missing RCU idle APIs on idle loop
  score: Add missing RCU idle APIs on idle loop
  parisc: Add missing RCU idle APIs on idle loop
  ...

Pull ktest fix from Steven Rostedt:
 "ktest has one fix needed for this merge window - fix parsing of ELSE
  IF in reading config file"

* tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ELSE IF statements

Merge tag 'localmodconfig-v3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig fixes from Steven Rostedt:
 "Bill Pemberton added some changes to make streamline-config.pl work
  again as a stand-alone tool (outside of make localmodconfig).

  Also, he added a couple of updates to make the code be more "Perl
  proper".

  Added last minute fix to localyesconfig, that was the same as
  localmodconfig since v3.2, due to a change in the makefiles."

* tag 'localmodconfig-v3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Fix localyesconfig to set to 'y' not 'm'
  localmodconfig: Use my variable for loop in streamline_config.pl
  localmodconfig: Use 3 parameter open in streamline_config.pl
  localmodconfig: Rework find_config in streamline_config.pl
  localmodconfig: Set default value for ksource in streamline_config.pl

The kbuild target 'localyesconfig' has been same as 'localmodconfig'
since the commit 50bce3e8 "kconfig/streamline_config.pl: merge
local{mod,yes}config". The commit expects this script generates
different configure depending on target, but it was not yet implemented.

So I added code that sets to 'yes' when target is 'localyesconfig'.

Link: http://lkml.kernel.org/r/1349101470-12243-1-git-send-email-yuta.and@gmail.com

Cc: stable@vger.kernel.org # v3.2
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: NYuta Ando <yuta.and@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@rostedt.homelinux.com>

Pull HID updates from Jiri Kosina:

 1) Patchset from Henrik Rydberg which substantially reduces irqsoff
    latency for all input devices.  In addition to that, Henrik reworked
    multitouch handling in order to reduce runtime memory consumption.

    This patchset touches code in Input subsystem as well.  All the
    changes have been Acked by Dmitry, and we agreed to do it this way
    due to inter-dependencies between the patchset and subsequent
    changes in HID subsystem.

 2) Rework, clenaups and a lot of fixes to picolcd driver by Bruno
    Prémont.

 3) Core report descriptor handling fix which fixes resume issue on some
    devices, by Kevin Daughtridge

 4) hidraw fixes by Alexey Khoroshilov and Ratan Nalumasu

 5) wiimote driver now supports balance board, by David Herrmann.

 6) Other smaller fixes and new device id additions all over the place.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (79 commits)
  HID: hidraw: don't deallocate memory when it is in use
  HID: picoLCD: optimize for inactive debugfs
  HID: multitouch: add support for GeneralTouch multi-touchscreen
  HID: Add support for Sony PS3 BD Remote Control
  HID: keep dev_rdesc unmodified and use it for comparisons
  HID: lg4ff: Minor coding style fixes in lg4ff and hid-lg
  HID: hid-lg4ff: Set absolute axes parametes on DFP
  HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.
  HID: hid-lg4ff: Minor code cleanup to improve readability
  HID: ntrig: change default value of logical/physical width/height to 1
  HID: picoLCD: bounds check in dump_buff_as_hex()
  Input: bcm5974 - Convert to MT-B
  Input: bcm5974 - Drop the logical dimensions
  Input: bcm5974 - Preparatory renames
  Input: bcm5974 - only setup button urb for TYPE1 devices
  HID: hid-multitouch: Add Flatfrog support
  HID: hid-multitouch: Fix contact count on 3M panels
  HID: hid-multitouch: Remove the redundant touch state
  HID: hid-multitouch: Simplify setup and frame synchronization
  HID: Allow more fields in the hid report
  ...

Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...

Pull regulator updates from Mark Brown:
 - Support for putting regulators into bypass mode where they simply
   switch their input to the output (mainly used for low power
   retention).
 - A new API for setting voltages based on a voltage plus tolerance
   rather than an explicit voltage range.
 - Lots of cleanups and API updates from Axel Lin.
 - New driver for MAX8907.

* tag 'regulator-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits)
  regulator: arizona-ldo: Remove top voltage
  regulator: tps6586x: remove regulator-compatible from DT docs
  regulator: tps65217.txt: remove regulator-compatible from DT docs
  regulator: deprecate regulator-compatible DT property
  regulator: fan53555: remove vsel_max not used
  regulator: aat2870: Don't explicitly initialise the first field
  extcon: arizona: Use bypass mode for MICVDD
  regulator: wm831x-ldo: Add bypass support
  regulator: arizona-micsupp: Support get/set bypass
  regulator: arizona-ldo: Support get/set bypass
  regulator: core: Provide regmap get/set bypass operations
  regulator: core: Support bypass mode
  regulator: Fairchild fan53555 support
  regulator: twl: Remove another unused variable warning
  regulator: core: Try using the parent device for the default regmap
  regulator: core: Fast path non-deferred disables
  regulator: core: Report microvolts in sysfs even with only list_voltage()
  regulator: tps6586x: add support for SYS rail
  regulator: lp872x: remove unnecessary function
  regulator: lp872x: fix NULL pointer access problem
  ...

Pull regmap updates from Mark Brown:
 "A quiet release for the regmap core, essentially all the activity is
  in the shared interrupt controller which is being more and more widely
  used and has been enhanced to support a wider range of masking types
  and wake handling methods, plus integration with runtime PM for
  devices making aggressive use of that."

* tag 'regmap-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: no need primary handler for nested irq
  regmap: irq: Add mask invert flag for enable register
  mfd: wm8994: Flag the interrupt block as requiring runtime PM be enabled
  regmap: irq: Enable devices for runtime PM while handling interrupts
  regmap: irq: initialize all irqs to wake disabled
  regmap: set MASK_ON_SUSPEND/SKIP_SET_WAKE if no wake_base
  regmap: name irq_chip based on regmap_irq_chip's name
  regmap: store irq_chip inside regmap_irq_chip_data
  regmap: irq: Only update mask bits when doing initial mask
  regmap: fix some error messages to take account of irq_reg_stride
  regmap: Don't lock in regmap_reinit_cache()

Pull GFS2 updates from Steven Whitehouse:
 "The major feature this time is the "rbm" conversion in the resource
  group code.  The new struct gfs2_rbm specifies the location of an
  allocatable block in (resource group, bitmap, offset) form.  There are
  a number of added helper functions, and later patches then rewrite
  some of the resource group code in terms of this new structure.  Not
  only does this give us a nice code clean up, but it also removes some
  of the previous restrictions where extents could not cross bitmap
  boundaries, for example.

  In addition to that, there are a few bug fixes and clean ups, but the
  rbm work is by far the majority of this patch set in terms of number
  of changed lines."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (27 commits)
  GFS2: Write out dirty inode metadata in delayed deletes
  GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_gl
  GFS2: Fix infinite loop in rbm_find
  GFS2: Consolidate free block searching functions
  GFS2: Get rid of I_MUTEX_QUOTA usage
  GFS2: Stop block extents at the end of bitmaps
  GFS2: Fix unclaimed_blocks() wrapping bug and clean up
  GFS2: Improve block reservation tracing
  GFS2: Fall back to ignoring reservations, if there are no other blocks left
  GFS2: Fix ->show_options() for statfs slow
  GFS2: Use rbm for gfs2_setbit()
  GFS2: Use rbm for gfs2_testbit()
  GFS2: Eliminate unnecessary check for state > 3 in bitfit
  GFS2: Eliminate redundant calls to may_grant
  GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demote
  GFS2: Combine functions gfs2_glock_wait and wait_on_holder
  GFS2: inline __gfs2_glock_schedule_for_reclaim
  GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dq
  GFS2: rbm code cleanup
  GFS2: Fix case where reservation finished at end of rgrp
  ...

Conflicts:
	drivers/hid/hid-multitouch.c

Conflicts:
	drivers/hid/usbhid/hid-quirks.c

Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', 'uclogic', 'wacom' and 'wiimote' into for-linus