提交 · d99f7b079c2a49b2278fe80192fbca083db87d18 · openeuler / Kernel

08 10月, 2019 20 次提交

drm/i915/gt: Flush submission tasklet before waiting/retiring · d99f7b07

由 Chris Wilson 提交于 10月 08, 2019

A common bane of ours is arbitrary delays in ksoftirqd processing our
submission tasklet. Give the submission tasklet a kick before we wait to
avoid those delays eating into a tight timeout.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008105655.13256-1-chris@chris-wilson.co.uk

d99f7b07

drm/i915/perf: drop list of streams · 23b9e41a

由 Lionel Landwerlin 提交于 10月 08, 2019

At some point in time there was the idea that we could have multiple
stream from the same piece of HW but that never materialized and given
the hard time we already have making everything work with the
submission side, there is no real point having this list of 1 element
around.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008140111.5437-1-chris@chris-wilson.co.uk

23b9e41a

drm/i915/selftests: Assign the intel_runtime_pm pointer for mock_uncore · d14a701b

由 Chris Wilson 提交于 10月 08, 2019

Couple up our mock_uncore to know about the fake global device and its
runtime powermanagement.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008145045.23157-1-chris@chris-wilson.co.uk

d14a701b

drm/i915/selftests: Assign the mock_engine->uncore shortcut · 3de16278

由 Chris Wilson 提交于 10月 08, 2019

Set up the engine->uncore shortcut on mock_engine creation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008071121.25088-1-chris@chris-wilson.co.uk

3de16278

drm/i915/execlists: Assign virtual_engine->uncore from first sibling · 20af04f3

由 Chris Wilson 提交于 10月 08, 2019

Copy across the engine->uncore shortcut to the virtual_engine from its
first physical engine, similar to the handling of the engine->gt
backpointer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008070342.4045-1-chris@chris-wilson.co.uk

20af04f3

drm/i915/tgl: Add DC3CO counter in i915_dmc_info · 41286861

由 Anshuman Gupta 提交于 10月 03, 2019

Adding DC3CO counter in i915_dmc_info debugfs will be
useful for DC3CO validation.
DMC firmware uses DMC_DEBUG3 register as DC3CO counter
register on TGL, as per B.Specs DMC_DEBUG3 is general
purpose register.

v1: comment modification for DMC_DBUG3.
    using GEN >= 12 check instead of IS_TIGERLAKE()
    to print DMC_DEBUG3 counter value.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-7-anshuman.gupta@intel.com

41286861

drm/i915/tgl: Switch between dc3co and dc5 based on display idleness · 1c4d821d

由 Anshuman Gupta 提交于 10月 03, 2019

DC3CO is useful power state, when DMC detects PSR2 idle frame
while an active video playback, playing 30fps video on 60hz panel
is the classic example of this use case.

B.Specs:49196 has a restriction to enable DC3CO only for Video Playback.
It will be worthy to enable DC3CO after completion of each pageflip
and switch back to DC5 when display is idle because driver doesn't
differentiate between video playback and a normal pageflip.
We will use Frontbuffer flush call tgl_dc3co_flush() to enable DC3CO
state only for ORIGIN_FLIP flush call, because DC3CO state has primarily
targeted for VPB use case. We are not interested here for frontbuffer
invalidates calls because that triggers PSR2 exit, which will
explicitly disable DC3CO.

DC5 and DC6 saves more power, but can't be entered during video
playback because there are not enough idle frames in a row to meet
most PSR2 panel deep sleep entry requirement typically 4 frames.
As PSR2 existing implementation is using minimum 6 idle frames for
deep sleep, it is safer to enable DC5/6 after 6 idle frames
(By scheduling a delayed work of 6 idle frames, once DC3CO has been
enabled after a pageflip).

After manually waiting for 6 idle frames DC5/6 will be enabled and
PSR2 deep sleep idle frames will be restored to 6 idle frames, at this
point DMC will triggers DC5/6 once PSR2 enters to deep sleep after
6 idle frames.
In future when we will enable S/W PSR2 tracking, we can change the
PSR2 required deep sleep idle frames to 1 so DMC can trigger the
DC5/6 immediately after S/W manual waiting of 6 idle frames get
complete.

v2: calculated s/w state to switch over dc3co when there is an
    update. [Imre]
    Used cancel_delayed_work_sync() in order to avoid any race
    with already scheduled delayed work. [Imre]
v3: Cancel_delayed_work_sync() may blocked the commit work.
    hence dropping it, dc5_idle_thread() checks the valid wakeref before
    putting the reference count, which avoids any chances of dropping
    a zero wakeref. [Imre (IRC)]
v4: Used frontbuffer flush mechanism. [Imre]
v5: Used psr.pipe to extract frontbuffer busy bits. [Imre]
    Used cancel_delayed_work_sync() in encoder disable path. [Imre]
    Used mod_delayed_work() instead of cancelling and scheduling a
    delayed work. [Imre]
    Used psr.lock in tgl_dc5_idle_thread() to enable psr2 deep
    sleep. [Imre]
    Removed DC5_REQ_IDLE_FRAMES macro. [Imre]
v6: Used dc3co_exitline check instead of TGL and dc3co allowed_dc_mask
    checks, used delayed_work_pending with the psr lock and removed the
    psr2_deep_slp_disabled flag. [Imre]
v7: Code refactoring, moved most of functional code to inte_psr.c [Imre]
    Using frontbuffer_bits on psr.pipe check instead of
    busy_frontbuffer_bits. [Imre]
    Calculating dc3co_exit_delay in intel_psr_enable_locked. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-6-anshuman.gupta@intel.com

1c4d821d

drm/i915/tgl: Do modeset to enable and configure DC3CO exitline · bdacf087

由 Anshuman Gupta 提交于 10月 03, 2019

DC3CO enabling B.Specs sequence requires to enable end configure
exit scanlines to TRANS_EXITLINE register, programming this register
has to be part of modeset sequence as this can't be change when
transcoder or port is enabled.
When system boots with only eDP panel there may not be real
modeset as BIOS has already programmed the necessary registers,
therefore it needs to force a modeset to enable and configure
DC3CO exitline.

v1: Computing dc3co_exitline crtc state from a DP encoder
    compute config. [Imre]
    Enabling and disabling DC3CO PSR2 transcoder exitline from
    encoder pre_enable and post_disable hooks. [Imre]
    Computing dc3co_exitline instead of has_dc3co_exitline bool. [Imre]
v2: Code refactoring for symmetry and to avoid exported function. [Imre]
    Removing IS_TIGERLAKE check from compute_config, adding PIPE_A
    restriction and clearing dc3co_exitline state if crtc is not active
    or it is not PSR2 capable in dc3co exitline compute_config. [Imre]
    Using GEN >= 12 check in dc3co exitline get_config. [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-5-anshuman.gupta@intel.com

bdacf087

drm/i915/tgl: Enable DC3CO state in "DC Off" power well · 4645e906

由 Anshuman Gupta 提交于 10月 03, 2019

Add target_dc_state and used by set_target_dc_state API
in order to enable DC3CO state with existing DC states.
target_dc_state will enable/disable the desired DC state in
DC_STATE_EN reg when "DC Off" power well gets disable/enable.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
    Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
    Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
    to a appropriate place haswell_crtc_enable(). [Imre]
    Changed the DC3CO power well enabled call back logic as
    recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.
v6: Fixed minor unwanted change.
v7: Removed DC3CO powerwell and POWER_DOMAIN_VIDEO.
v8: Uniform checks by using only target_dc_state instead of allowed_dc_mask
    in "DC off" power well callback. [Imre]
    Adding "DC off" power well id to older platforms. [Imre]
    Removed psr2_deep_sleep flag from tgl_set_target_dc_state. [Imre]
v9: Used switch case for target DC state in
    gen9_dc_off_power_well_disable(), checking DC3CO state against
    allowed DC mask, using WARN_ON() in
    tgl_set_target_dc_state(). [Imre]
v10: Code refactoring and using sanitize_target_dc_state(). [Imre]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-4-anshuman.gupta@intel.com

4645e906

drm/i915/tgl: Add DC3CO mask to allowed_dc_mask and gen9_dc_mask · 19c79ff8

由 Anshuman Gupta 提交于 10月 03, 2019

Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.

v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
    independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003081738.22101-3-anshuman.gupta@intel.com

19c79ff8

drm/i915/tgl: Add DC3CO required register and bits · e45e0003

由 Anshuman Gupta 提交于 10月 07, 2019

Adding following definition to i915_reg.h
1. DC_STATE_EN register DC3CO bit fields and masks.
   DC3CO enable bit will be used by driver to make DC3CO
   ready for DMC f/w and status bit will be used as DC3CO
   entry status.
2. Transcoder EXITLINE register and its bit fields and mask.
   Transcoder EXITLINE enable bit represents PSR2 idle frame
   reset should be applied at exit line and exitlines mask
   represent required number of scanlines at which DC3CO
   exit happens.

   B.Specs:49196

v1: Use of REG_BIT and using extra space for EXITLINE_ macro
    definition. [Animesh]
v2: Grouping EXITLINE reg bits with EXITLINE(trans) define,
    no functional change. [Ville]

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007094607.2111-1-anshuman.gupta@intel.com

e45e0003

drm/i915/perf: Set the exclusive stream under perf->lock · a4c969d1

由 Chris Wilson 提交于 10月 07, 2019

The BKL struct_mutex is no more, the only serialisation we required for
setting the exclusive stream is already managed by ce->pin_mutex in
gen8_configure_all_contexts(). As such, we can manipulate
i915_perf.exclusive_stream underneath our own (already held) perf->lock.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-2-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-2-chris@chris-wilson.co.uk

a4c969d1

drm/i915/perf: Wean ourselves off dev_priv · 8f8b1171

由 Chris Wilson 提交于 10月 07, 2019

Use the local uncore accessors for the GT rather than using the [not-so]
magic global dev_priv mmio routines. In the process, we also teach the
perf stream to use backpointers to the i915_perf rather than digging it
out of dev_priv.

v2: Rebase onto i915_perf_types.h
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191007140812.10963-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20191007210942.18145-1-chris@chris-wilson.co.uk

8f8b1171

drm/i915: Fix Kconfig indentation · d30213e5

由 Krzysztof Kozlowski 提交于 10月 07, 2019

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007173346.9379-1-krzk@kernel.org

d30213e5

drm/i915/gt: Treat a busy timeline as 'active' while waiting · a1b58ee3

由 Chris Wilson 提交于 10月 06, 2019

If we cannot claim the timeline->mutex while preparing for a wait on it,
we have to skip the timeline. In doing so, treat it as active so that
under a intel_gt_wait_for_idle() loop, we repeat the wait after
scheduling away.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-4-chris@chris-wilson.co.uk

a1b58ee3

drm/i915/selftests: Appease lockdep · 1664f35a

由 Chris Wilson 提交于 10月 04, 2019

Disable irqs around updating the context image to keep lockdep happy:

<4>[  673.483340] WARNING: possible irq lock inversion dependency detected
<4>[  673.483342] 5.4.0-rc1-CI-Trybot_5118+ #1 Tainted: G     U
<4>[  673.483342] --------------------------------------------------------
<4>[  673.483343] swapper/2/0 just changed the state of lock:
<4>[  673.483344] ffff88845db885a0 (&i915_request_get(rq)->submit/1){-...}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.483387] but this lock took another, HARDIRQ-unsafe lock in the past:
<4>[  673.483388]  (&ce->pin_mutex/2){+...}
<4>[  673.483389]

                  and interrupts could create inverse lock ordering between them.

<4>[  673.483390]
                  other info that might help us debug this:
<4>[  673.483390] Chain exists of:
                    &i915_request_get(rq)->submit/1 --> &engine->active.lock --> &ce->pin_mutex/2

<4>[  673.483392]  Possible interrupt unsafe locking scenario:

<4>[  673.483392]        CPU0                    CPU1
<4>[  673.483393]        ----                    ----
<4>[  673.483393]   lock(&ce->pin_mutex/2);
<4>[  673.483394]                                local_irq_disable();
<4>[  673.483395]                                lock(&i915_request_get(rq)->submit/1);
<4>[  673.483396]                                lock(&engine->active.lock);
<4>[  673.483396]   <Interrupt>
<4>[  673.483397]     lock(&i915_request_get(rq)->submit/1);
<4>[  673.483398]
                   *** DEADLOCK ***

<4>[  673.483398] 2 locks held by swapper/2/0:
<4>[  673.483399]  #0: ffff8883f61ac9b0 (&(&gt->irq_lock)->rlock){-.-.}, at: gen11_gt_irq_handler+0x42/0x280 [i915]
<4>[  673.483433]  #1: ffff88845db8c418 (&(&rq->lock)->rlock){-.-.}, at: intel_engine_breadcrumbs_irq+0x34a/0x5a0 [i915]
<4>[  673.483463]
                  the shortest dependencies between 2nd lock and 1st lock:
<4>[  673.483466]   -> (&ce->pin_mutex/2){+...} ops: 614520 {
<4>[  673.483468]      HARDIRQ-ON-W at:
<4>[  673.483471]                         lock_acquire+0xa7/0x1c0
<4>[  673.483501]                         live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483543]                         __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483581]                         __run_selftests+0x112/0x170 [i915]
<4>[  673.483615]                         i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483644]                         i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483646]                         pci_device_probe+0x9e/0x120
<4>[  673.483648]                         really_probe+0xea/0x420
<4>[  673.483649]                         driver_probe_device+0x10b/0x120
<4>[  673.483651]                         device_driver_attach+0x4a/0x50
<4>[  673.483652]                         __driver_attach+0x97/0x130
<4>[  673.483653]                         bus_for_each_dev+0x74/0xc0
<4>[  673.483654]                         bus_add_driver+0x142/0x220
<4>[  673.483655]                         driver_register+0x56/0xf0
<4>[  673.483657]                         do_one_initcall+0x58/0x2ff
<4>[  673.483659]                         do_init_module+0x56/0x1f8
<4>[  673.483660]                         load_module+0x243e/0x29f0
<4>[  673.483661]                         __do_sys_finit_module+0xe9/0x110
<4>[  673.483662]                         do_syscall_64+0x4f/0x210
<4>[  673.483665]                         entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483665]      INITIAL USE at:
<4>[  673.483667]                        lock_acquire+0xa7/0x1c0
<4>[  673.483698]                        live_unlite_restore+0x1d8/0x6c0 [i915]
<4>[  673.483733]                        __i915_subtests+0xb8/0x210 [i915]
<4>[  673.483764]                        __run_selftests+0x112/0x170 [i915]
<4>[  673.483793]                        i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.483821]                        i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.483822]                        pci_device_probe+0x9e/0x120
<4>[  673.483824]                        really_probe+0xea/0x420
<4>[  673.483825]                        driver_probe_device+0x10b/0x120
<4>[  673.483826]                        device_driver_attach+0x4a/0x50
<4>[  673.483827]                        __driver_attach+0x97/0x130
<4>[  673.483828]                        bus_for_each_dev+0x74/0xc0
<4>[  673.483829]                        bus_add_driver+0x142/0x220
<4>[  673.483830]                        driver_register+0x56/0xf0
<4>[  673.483831]                        do_one_initcall+0x58/0x2ff
<4>[  673.483833]                        do_init_module+0x56/0x1f8
<4>[  673.483834]                        load_module+0x243e/0x29f0
<4>[  673.483835]                        __do_sys_finit_module+0xe9/0x110
<4>[  673.483836]                        do_syscall_64+0x4f/0x210
<4>[  673.483837]                        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.483838]    }
<4>[  673.483868]    ... key      at: [<ffffffffa0a8f132>] __key.70113+0x2/0xffffffffffef2ed0 [i915]
<4>[  673.483869]    ... acquired at:
<4>[  673.483935]    __execlists_reset+0xfb/0xc20 [i915]
<4>[  673.483965]    execlists_reset+0x3d/0x50 [i915]
<4>[  673.483995]    intel_engine_reset+0xdf/0x230 [i915]
<4>[  673.484022]    live_preempt_hang+0x1d7/0x2e0 [i915]
<4>[  673.484064]    __i915_subtests+0xb8/0x210 [i915]
<4>[  673.484130]    __run_selftests+0x112/0x170 [i915]
<4>[  673.484163]    i915_live_selftests+0x2c/0x60 [i915]
<4>[  673.484193]    i915_pci_probe+0x93/0x1b0 [i915]
<4>[  673.484194]    pci_device_probe+0x9e/0x120
<4>[  673.484195]    really_probe+0xea/0x420
<4>[  673.484196]    driver_probe_device+0x10b/0x120
<4>[  673.484197]    device_driver_attach+0x4a/0x50
<4>[  673.484198]    __driver_attach+0x97/0x130
<4>[  673.484199]    bus_for_each_dev+0x74/0xc0
<4>[  673.484200]    bus_add_driver+0x142/0x220
<4>[  673.484202]    driver_register+0x56/0xf0
<4>[  673.484203]    do_one_initcall+0x58/0x2ff
<4>[  673.484204]    do_init_module+0x56/0x1f8
<4>[  673.484205]    load_module+0x243e/0x29f0
<4>[  673.484206]    __do_sys_finit_module+0xe9/0x110
<4>[  673.484207]    do_syscall_64+0x4f/0x210
<4>[  673.484208]    entry_SYSCALL_64_after_hwframe+0x49/0xbe

<4>[  673.484209]  -> (&engine->active.lock){..-.} ops: 972791 {
<4>[  673.484211]     IN-SOFTIRQ-W at:
<4>[  673.484213]                       lock_acquire+0xa7/0x1c0
<4>[  673.484214]                       _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484244]                       execlists_submission_tasklet+0xaf/0x100 [i915]
<4>[  673.484246]                       tasklet_action_common.isra.18+0x6c/0x1c0
<4>[  673.484247]                       __do_softirq+0xdf/0x47f
<4>[  673.484248]                       irq_exit+0xba/0xc0
<4>[  673.484249]                       do_IRQ+0x83/0x160
<4>[  673.484250]                       ret_from_intr+0x0/0x1d
<4>[  673.484252]                       cpuidle_enter_state+0xb2/0x450
<4>[  673.484253]                       cpuidle_enter+0x24/0x40
<4>[  673.484254]                       do_idle+0x1e7/0x250
<4>[  673.484256]                       cpu_startup_entry+0x14/0x20
<4>[  673.484257]                       start_secondary+0x15f/0x1b0
<4>[  673.484258]                       secondary_startup_64+0xa4/0xb0
<4>[  673.484259]     INITIAL USE at:
<4>[  673.484261]                      lock_acquire+0xa7/0x1c0
<4>[  673.484290]                      intel_engine_init_active+0x7e/0xb0 [i915]
<4>[  673.484305]                      intel_engines_setup+0x1cd/0x3b0 [i915]
<4>[  673.484305]                      i915_gem_init+0x12d/0x900 [i915]
<4>[  673.484305]                      i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                      i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                      pci_device_probe+0x9e/0x120
<4>[  673.484305]                      really_probe+0xea/0x420
<4>[  673.484305]                      driver_probe_device+0x10b/0x120
<4>[  673.484305]                      device_driver_attach+0x4a/0x50
<4>[  673.484305]                      __driver_attach+0x97/0x130
<4>[  673.484305]                      bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                      bus_add_driver+0x142/0x220
<4>[  673.484305]                      driver_register+0x56/0xf0
<4>[  673.484305]                      do_one_initcall+0x58/0x2ff
<4>[  673.484305]                      do_init_module+0x56/0x1f8
<4>[  673.484305]                      load_module+0x243e/0x29f0
<4>[  673.484305]                      __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                      do_syscall_64+0x4f/0x210
<4>[  673.484305]                      entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]   }
<4>[  673.484305]   ... key      at: [<ffffffffa0a8f160>] __key.70307+0x0/0xffffffffffef2ea0 [i915]
<4>[  673.484305]   ... acquired at:
<4>[  673.484305]    _raw_spin_lock_irqsave+0x33/0x50
<4>[  673.484305]    execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  673.484305]    submit_notify+0xa8/0x13c [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  673.484305]    i915_sw_fence_wake+0x51/0x70 [i915]
<4>[  673.484305]    __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  673.484305]    dma_i915_sw_fence_wake+0x1b/0x30 [i915]
<4>[  673.484305]    dma_fence_signal_locked+0x9e/0x1b0
<4>[  673.484305]    dma_fence_signal+0x1f/0x40
<4>[  673.484305]    fence_work+0x28/0x80 [i915]
<4>[  673.484305]    process_one_work+0x26a/0x620
<4>[  673.484305]    worker_thread+0x37/0x380
<4>[  673.484305]    kthread+0x119/0x130
<4>[  673.484305]    ret_from_fork+0x24/0x50

<4>[  673.484305] -> (&i915_request_get(rq)->submit/1){-...} ops: 857694 {
<4>[  673.484305]    IN-HARDIRQ-W at:
<4>[  673.484305]                     lock_acquire+0xa7/0x1c0
<4>[  673.484305]                     _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                     __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                     intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]                     cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]                     gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]                     gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]                     __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]                     handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]                     handle_irq_event+0x2f/0x50
<4>[  673.484305]                     handle_edge_irq+0x99/0x1b0
<4>[  673.484305]                     do_IRQ+0x7e/0x160
<4>[  673.484305]                     ret_from_intr+0x0/0x1d
<4>[  673.484305]                     cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]                     cpuidle_enter+0x24/0x40
<4>[  673.484305]                     do_idle+0x1e7/0x250
<4>[  673.484305]                     cpu_startup_entry+0x14/0x20
<4>[  673.484305]                     start_secondary+0x15f/0x1b0
<4>[  673.484305]                     secondary_startup_64+0xa4/0xb0
<4>[  673.484305]    INITIAL USE at:
<4>[  673.484305]                    lock_acquire+0xa7/0x1c0
<4>[  673.484305]                    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]                    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]                    __engine_park+0x233/0x420 [i915]
<4>[  673.484305]                    ____intel_wakeref_put_last+0x1c/0x70 [i915]
<4>[  673.484305]                    intel_gt_resume+0x202/0x2c0 [i915]
<4>[  673.484305]                    i915_gem_init+0x36e/0x900 [i915]
<4>[  673.484305]                    i915_driver_probe+0xb70/0x15d0 [i915]
<4>[  673.484305]                    i915_pci_probe+0x43/0x1b0 [i915]
<4>[  673.484305]                    pci_device_probe+0x9e/0x120
<4>[  673.484305]                    really_probe+0xea/0x420
<4>[  673.484305]                    driver_probe_device+0x10b/0x120
<4>[  673.484305]                    device_driver_attach+0x4a/0x50
<4>[  673.484305]                    __driver_attach+0x97/0x130
<4>[  673.484305]                    bus_for_each_dev+0x74/0xc0
<4>[  673.484305]                    bus_add_driver+0x142/0x220
<4>[  673.484305]                    driver_register+0x56/0xf0
<4>[  673.484305]                    do_one_initcall+0x58/0x2ff
<4>[  673.484305]                    do_init_module+0x56/0x1f8
<4>[  673.484305]                    load_module+0x243e/0x29f0
<4>[  673.484305]                    __do_sys_finit_module+0xe9/0x110
<4>[  673.484305]                    do_syscall_64+0x4f/0x210
<4>[  673.484305]                    entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  673.484305]  }
<4>[  673.484305]  ... key      at: [<ffffffffa0a8f6a1>] __key.80173+0x1/0xffffffffffef2960 [i915]
<4>[  673.484305]  ... acquired at:
<4>[  673.484305]    mark_lock+0x382/0x500
<4>[  673.484305]    __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]    lock_acquire+0xa7/0x1c0
<4>[  673.484305]    _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]    __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]    intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]    cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]    gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]    gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]    __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]    handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]    handle_irq_event+0x2f/0x50
<4>[  673.484305]    handle_edge_irq+0x99/0x1b0
<4>[  673.484305]    do_IRQ+0x7e/0x160
<4>[  673.484305]    ret_from_intr+0x0/0x1d
<4>[  673.484305]    cpuidle_enter_state+0xb2/0x450
<4>[  673.484305]    cpuidle_enter+0x24/0x40
<4>[  673.484305]    do_idle+0x1e7/0x250
<4>[  673.484305]    cpu_startup_entry+0x14/0x20
<4>[  673.484305]    start_secondary+0x15f/0x1b0
<4>[  673.484305]    secondary_startup_64+0xa4/0xb0

<4>[  673.484305]
                  stack backtrace:
<4>[  673.484305] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.4.0-rc1-CI-Trybot_5118+ #1
<4>[  673.484305] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[  673.484305] Call Trace:
<4>[  673.484305]  <IRQ>
<4>[  673.484305]  dump_stack+0x67/0x9b
<4>[  673.484305]  check_usage_forwards+0x13c/0x150
<4>[  673.484305]  ? mark_lock+0x382/0x500
<4>[  673.484305]  mark_lock+0x382/0x500
<4>[  673.484305]  ? check_usage_backwards+0x140/0x140
<4>[  673.484305]  __lock_acquire+0x7e1/0x15d0
<4>[  673.484305]  ? debug_object_deactivate+0x17e/0x190
<4>[  673.484305]  lock_acquire+0xa7/0x1c0
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  673.484305]  ? __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  673.484305]  intel_engine_breadcrumbs_irq+0x3d0/0x5a0 [i915]
<4>[  673.484305]  cs_irq_handler+0x39/0x50 [i915]
<4>[  673.484305]  gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  673.484305]  gen11_irq_handler+0x54/0xf0 [i915]
<4>[  673.484305]  __handle_irq_event_percpu+0x41/0x2c0
<4>[  673.484305]  handle_irq_event_percpu+0x2b/0x70
<4>[  673.484305]  handle_irq_event+0x2f/0x50
<4>[  673.484305]  handle_edge_irq+0x99/0x1b0
<4>[  673.484305]  do_IRQ+0x7e/0x160
<4>[  673.484305]  common_interrupt+0xf/0xf
<4>[  673.484305]  </IRQ>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004203121.31138-1-chris@chris-wilson.co.uk

1664f35a

drm/i915/execlists: Fix annotation for decoupling virtual request · 08ad9a38

由 Chris Wilson 提交于 10月 04, 2019

As we may signal a request and take the engine->active.lock within the
signaler, the engine submission paths have to use a nested annotation on
their requests -- but we guarantee that we can never submit on the same
engine as the signaling fence.

<4>[  723.763281] WARNING: possible circular locking dependency detected
<4>[  723.763285] 5.3.0-g80fa0e042cdb-drmtip_379+ #1 Tainted: G     U
<4>[  723.763288] ------------------------------------------------------
<4>[  723.763291] gem_exec_await/1388 is trying to acquire lock:
<4>[  723.763294] ffff93a7b53221d8 (&engine->active.lock){..-.}, at: execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.763378]
                  but task is already holding lock:
<4>[  723.763381] ffff93a7c25f6d20 (&i915_request_get(rq)->submit/1){-.-.}, at: __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763420]
                  which lock already depends on the new lock.

<4>[  723.763423]
                  the existing dependency chain (in reverse order) is:
<4>[  723.763427]
                  -> #2 (&i915_request_get(rq)->submit/1){-.-.}:
<4>[  723.763434]        _raw_spin_lock_irqsave_nested+0x39/0x50
<4>[  723.763478]        __i915_sw_fence_complete+0x1b2/0x250 [i915]
<4>[  723.763513]        intel_engine_breadcrumbs_irq+0x3aa/0x5e0 [i915]
<4>[  723.763600]        cs_irq_handler+0x49/0x50 [i915]
<4>[  723.763659]        gen11_gt_irq_handler+0x17b/0x280 [i915]
<4>[  723.763690]        gen11_irq_handler+0x54/0xf0 [i915]
<4>[  723.763695]        __handle_irq_event_percpu+0x41/0x2d0
<4>[  723.763699]        handle_irq_event_percpu+0x2b/0x70
<4>[  723.763702]        handle_irq_event+0x2f/0x50
<4>[  723.763706]        handle_edge_irq+0xee/0x1a0
<4>[  723.763709]        do_IRQ+0x7e/0x160
<4>[  723.763712]        ret_from_intr+0x0/0x1d
<4>[  723.763717]        __slab_alloc.isra.28.constprop.33+0x4f/0x70
<4>[  723.763720]        kmem_cache_alloc+0x28d/0x2f0
<4>[  723.763724]        vm_area_dup+0x15/0x40
<4>[  723.763727]        dup_mm+0x2dd/0x550
<4>[  723.763730]        copy_process+0xf21/0x1ef0
<4>[  723.763734]        _do_fork+0x71/0x670
<4>[  723.763737]        __se_sys_clone+0x6e/0xa0
<4>[  723.763741]        do_syscall_64+0x4f/0x210
<4>[  723.763744]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.763747]
                  -> #1 (&(&rq->lock)->rlock#2){-.-.}:
<4>[  723.763752]        _raw_spin_lock+0x2a/0x40
<4>[  723.763789]        __unwind_incomplete_requests+0x3eb/0x450 [i915]
<4>[  723.763825]        __execlists_submission_tasklet+0x9ec/0x1d60 [i915]
<4>[  723.763864]        execlists_submission_tasklet+0x34/0x50 [i915]
<4>[  723.763874]        tasklet_action_common.isra.5+0x47/0xb0
<4>[  723.763878]        __do_softirq+0xd8/0x4ae
<4>[  723.763881]        irq_exit+0xa9/0xc0
<4>[  723.763883]        smp_apic_timer_interrupt+0xb7/0x280
<4>[  723.763887]        apic_timer_interrupt+0xf/0x20
<4>[  723.763892]        cpuidle_enter_state+0xae/0x450
<4>[  723.763895]        cpuidle_enter+0x24/0x40
<4>[  723.763899]        do_idle+0x1e7/0x250
<4>[  723.763902]        cpu_startup_entry+0x14/0x20
<4>[  723.763905]        start_secondary+0x15f/0x1b0
<4>[  723.763908]        secondary_startup_64+0xa4/0xb0
<4>[  723.763911]
                  -> #0 (&engine->active.lock){..-.}:
<4>[  723.763916]        __lock_acquire+0x15d8/0x1ea0
<4>[  723.763919]        lock_acquire+0xa6/0x1c0
<4>[  723.763922]        _raw_spin_lock_irqsave+0x33/0x50
<4>[  723.763956]        execlists_submit_request+0x2b/0x1e0 [i915]
<4>[  723.764002]        submit_notify+0xa8/0x13c [i915]
<4>[  723.764035]        __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[  723.764054]        i915_sw_fence_wake+0x51/0x64 [i915]
<4>[  723.764054]        __i915_sw_fence_complete+0x1ee/0x250 [i915]
<4>[  723.764054]        dma_i915_sw_fence_wake_timer+0x14/0x20 [i915]
<4>[  723.764054]        dma_fence_signal_locked+0x9e/0x1c0
<4>[  723.764054]        dma_fence_signal+0x1f/0x40
<4>[  723.764054]        vgem_fence_signal_ioctl+0x67/0xc0 [vgem]
<4>[  723.764054]        drm_ioctl_kernel+0x83/0xf0
<4>[  723.764054]        drm_ioctl+0x2f3/0x3b0
<4>[  723.764054]        do_vfs_ioctl+0xa0/0x6f0
<4>[  723.764054]        ksys_ioctl+0x35/0x60
<4>[  723.764054]        __x64_sys_ioctl+0x11/0x20
<4>[  723.764054]        do_syscall_64+0x4f/0x210
<4>[  723.764054]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  723.764054]
                  other info that might help us debug this:

<4>[  723.764054] Chain exists of:
                    &engine->active.lock --> &(&rq->lock)->rlock#2 --> &i915_request_get(rq)->submit/1

<4>[  723.764054]  Possible unsafe locking scenario:

<4>[  723.764054]        CPU0                    CPU1
<4>[  723.764054]        ----                    ----
<4>[  723.764054]   lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]                                lock(&(&rq->lock)->rlock#2);
<4>[  723.764054]                                lock(&i915_request_get(rq)->submit/1);
<4>[  723.764054]   lock(&engine->active.lock);
<4>[  723.764054]
                   *** DEADLOCK ***

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111862Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004194758.19679-1-chris@chris-wilson.co.uk

08ad9a38

drm/i915/gt: Prefer local path to runtime powermanagement · cd6a8513

由 Chris Wilson 提交于 10月 07, 2019

Avoid going to the base i915 device when we already have a path from gt
to the runtime powermanagement interface. The benefit is that it looks a
bit more self-consistent to always be acquiring the gt->uncore->rpm for
use with the gt->uncore.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154531.1750-1-chris@chris-wilson.co.uk

cd6a8513

drm/i915: make array hw_engine_mask static, makes object smaller · b9dcb97b

由 Colin Ian King 提交于 10月 07, 2019

Don't populate the array hw_engine_mask on the stack but instead make it
static. Makes the object code smaller by 316 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  34004	   4388	    320	  38712	   9738	gpu/drm/i915/gt/intel_reset.o

After:
   text	   data	    bss	    dec	    hex	filename
  33528	   4548	    320	  38396	   95fc	gpu/drm/i915/gt/intel_reset.o

(gcc version 9.2.1, amd64)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007154151.23245-1-colin.king@canonical.com

b9dcb97b

drm/i915/vbt: Child device size remains unchanged through VBT 229 · 3aec2c6a

由 Matt Roper 提交于 10月 02, 2019

The latest documented version of the VBT is 229, but no further data has
been added to the child device definition in block 2.  Update the child
device version test to eliminate the "Expected child device config size
for VBT version XXX not known; assuming 39" debug messages from the
logs.

Bspec: 20124
Bspec: 20157
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002192258.1013-1-matthew.d.roper@intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

3aec2c6a

07 10月, 2019 3 次提交

drm/i915/perf: move perf types to their own header · 1d0f2ebf

由 Lionel Landwerlin 提交于 9月 09, 2019

Following a pattern used throughout the driver.
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909093116.7747-7-lionel.g.landwerlin@intel.com

1d0f2ebf

drm/i915/gt: Restore dropped 'interruptible' flag · abc47ff6

由 Chris Wilson 提交于 10月 06, 2019

Lost in the rebasing was Tvrtko's reminder that we need to keep an
uninterruptible wait around for the Ironlake VT-d w/a
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191006165002.30312-3-chris@chris-wilson.co.uk

abc47ff6

J
drm/i915: Update DRIVER_DATE to 20191007 · 9445ad17
由 Joonas Lahtinen 提交于 10月 07, 2019
```
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
```
9445ad17

06 10月, 2019 3 次提交

drm/i915: move gmbus setup down to intel_modeset_init() · 9bfcf194

由 Jani Nikula 提交于 10月 04, 2019

Pair the gmbus setup and teardown in the same layer. This also fixes the
double gmbus teardown on the i915_driver_modeset_probe() error path.

Move the gmbus setup a bit later in the sequence to make the follow-up
refactoring easier, and to pinpoint any unexpected consequences of this
change right here, instead of the later refactoring.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-3-jani.nikula@intel.com

9bfcf194

drm/i915: split out i915_switcheroo.[ch] from i915_drv.c · 63bf8301

由 Jani Nikula 提交于 10月 04, 2019

Split out code related to vga switcheroo register/unregister and state
handling from i915_drv.c into new i915_switcheroo.[ch] files.

It's a bit difficult to draw the line how much to move to the new file
from i915_drv.c, but it seemed to me keeping i915_suspend_switcheroo()
and i915_resume_switcheroo() in place was the cleanest.

No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-2-jani.nikula@intel.com

63bf8301

drm/i915/vga: rename intel_vga_msr_write() to intel_vga_reset_io_mem() · 7fd29602

由 Jani Nikula 提交于 10月 04, 2019

Rename the function per Ville's suggestion. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004122019.12009-1-jani.nikula@intel.com

7fd29602

05 10月, 2019 1 次提交

drm/i915/stolen: make the object creation interface consistent · 0e5493ca

由 CQ Tang 提交于 10月 04, 2019

Our other backends return an actual error value upon failure. Do the
same for stolen objects, which currently just return NULL on failure.
Signed-off-by: NCQ Tang <cq.tang@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004170452.15410-2-matthew.auld@intel.com

0e5493ca

04 10月, 2019 13 次提交

drm/i915: Implement a better i945gm vblank irq vs. C-states workaround · 7d423af9

由 Ville Syrjälä 提交于 10月 03, 2019

The current "disable C3+" workaround for the delayed vblank
irqs on i945gm no longer works. I'm not sure what changed, but
now I need to also disable C2. I also got my hands on a i915gm
machine that suffers from the same issue.

After some furious poking of registers I managed to find a
better workaround: The "Do not Turn off Core Render Clock in C
states" bit. With that I no longer have to disable any C-states,
and as a nice bonus the power cost is only ~1/4 of the
"disable C3+" method (which mind you doesn't even work anymore,
and so would have an even higher power cost if we made it work
by also disabling C2).

So let's throw out all the cpuidle/qos crap and just toggle
the magic bit as needed. And we extend the workaround to cover
i915gm as well.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003140231.24408-1-ville.syrjala@linux.intel.comAcked-by: NChris Wilson <chris@chris-wilson.co.uk>

7d423af9

drm/i915: Drop struct_mutex from around GEM initialisation · 78427933

由 Chris Wilson 提交于 10月 04, 2019

We no longer need to placate lockdep by holding struct_mutex for our
initialisation, so don't.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-21-chris@chris-wilson.co.uk

78427933

drm/i915/selftests: Drop vestigal struct_mutex guards · 2af40298

由 Chris Wilson 提交于 10月 04, 2019

We no longer need struct_mutex to serialise request emission, so remove
it from the gt selftests.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-20-chris@chris-wilson.co.uk

2af40298

drm/i915: Drop struct_mutex from suspend state save/restore · 3d88f76d

由 Chris Wilson 提交于 10月 04, 2019

struct_mutex provides no serialisation of the registers and data
structures being saved and restored across suspend/resume. It is
completely superfluous here.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-19-chris@chris-wilson.co.uk

3d88f76d

drm/i915: Remove struct_mutex guard for debugfs/opregion · 6c3828ab

由 Chris Wilson 提交于 10月 04, 2019

Having a struct_mutex around the read of a BIOS blob serves no purpose.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-18-chris@chris-wilson.co.uk

6c3828ab

drm/i915: Drop struct_mutex guard from debugfs/framebuffer_info · ba198a10

由 Chris Wilson 提交于 10月 04, 2019

It protects nothing being accessed for the intel_framebuffer, so it's
own locking had better be sufficient.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-17-chris@chris-wilson.co.uk

ba198a10

drm/i915/overlay: Drop struct_mutex guard · cb5eb072

由 Chris Wilson 提交于 10月 04, 2019

The overlay uses the modeset mutex to control itself and only required
the struct_mutex for requests, which is now obsolete.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-16-chris@chris-wilson.co.uk

cb5eb072

drm/i915: Move context management under GEM · a4e7ccda

由 Chris Wilson 提交于 10月 04, 2019

Keep track of the GEM contexts underneath i915->gem.contexts and assign
them their own lock for the purposes of list management.

v2: Focus on lock tracking; ctx->vm is protected by ctx->mutex
v3: Correct split with removal of logical HW ID
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-15-chris@chris-wilson.co.uk

a4e7ccda

drm/i915: Remove logical HW ID · 2935ed53

由 Chris Wilson 提交于 10月 04, 2019

With the introduction of ctx->engines[] we allow multiple logical
contexts to be used on the same engine (e.g. with virtual engines).
According to bspec, aach logical context requires a unique tag in order
for context-switching to occur correctly between them. [Simple
experiments show that it is not so easy to trick the HW into performing
a lite-restore with matching logical IDs, though my memory from early
Broadwell experiments do suggest that it should be generating
lite-restores.]

We only need to keep a unique tag for the active lifetime of the
context, and for as long as we need to identify that context. The HW
uses the tag to determine if it should use a lite-restore (why not the
LRCA?) and passes the tag back for various status identifies. The only
status we need to track is for OA, so when using perf, we assign the
specific context a unique tag.

v2: Calculate required number of tags to fill ELSP.

Fixes: 976b55f0 ("drm/i915: Allow a context to define its set of engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111895Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-14-chris@chris-wilson.co.uk

2935ed53

drm/i915: Move global activity tracking from GEM to GT · a2b4dead

由 Chris Wilson 提交于 10月 04, 2019

As our global unpark/park keep track of the number of active users, we
can simply move the accounting from the GEM layer to the base GT layer.
It was placed originally inside GEM to benefit from the 100ms extra
delay on idleness, but that has been eliminated and now there is no
substantive difference between the layers. In moving it, we move another
piece of the puzzle out from underneath struct_mutex.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-13-chris@chris-wilson.co.uk

a2b4dead

drm/i915: Move request runtime management onto gt · 66101975

由 Chris Wilson 提交于 10月 04, 2019

Requests are run from the gt and are tided into the gt runtime power
management, so pull the runtime request management under gt/
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-12-chris@chris-wilson.co.uk

66101975

drm/i915/gem: Retire directly for mmap-offset shrinking · 789ed955

由 Chris Wilson 提交于 10月 04, 2019

Now that we can retire without taking struct_mutex, we can do so to
handle shrinking the mmap-offset space after an allocation failure.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-11-chris@chris-wilson.co.uk

789ed955

drm/i915: Merge wait_for_timelines with retire_request · f33a8a51

由 Chris Wilson 提交于 10月 04, 2019

wait_for_timelines is essentially the same loop as retiring requests
(with an extra timeout), so merge the two into one routine.

v2: i915_retire_requests_timeout and keep VT'd w/a as !interruptible
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004134015.13204-10-chris@chris-wilson.co.uk

f33a8a51

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功