Add the netlink interface for TDC parameters of struct can_tdc_const
and can_tdc.

Contrary to the can_bittiming(_const) structures for which there is
just a single IFLA_CAN(_DATA)_BITTMING(_CONST) entry per structure,
here, we create a nested entry IFLA_CAN_TDC. Within this nested entry,
additional IFLA_CAN_TDC_TDC* entries are added for each of the TDC
parameters of the newly introduced struct can_tdc_const and struct
can_tdc.

For struct can_tdc_const, these are:
        IFLA_CAN_TDC_TDCV_MIN
        IFLA_CAN_TDC_TDCV_MAX
        IFLA_CAN_TDC_TDCO_MIN
        IFLA_CAN_TDC_TDCO_MAX
        IFLA_CAN_TDC_TDCF_MIN
        IFLA_CAN_TDC_TDCF_MAX

For struct can_tdc, these are:
        IFLA_CAN_TDC_TDCV
        IFLA_CAN_TDC_TDCO
        IFLA_CAN_TDC_TDCF

This is done so that changes can be applied in the future to the
structures without breaking the netlink interface.

The TDC netlink logic works as follow:

 * CAN_CTRLMODE_FD is not provided:
    - if any TDC parameters are provided: error.

    - TDC parameters not provided: TDC parameters unchanged.

 * CAN_CTRLMODE_FD is provided and is false:
     - TDC is deactivated: both the structure and the
       CAN_CTRLMODE_TDC_{AUTO,MANUAL} flags are flushed.

 * CAN_CTRLMODE_FD provided and is true:
    - CAN_CTRLMODE_TDC_{AUTO,MANUAL} and tdc{v,o,f} not provided: call
      can_calc_tdco() to automatically decide whether TDC should be
      activated and, if so, set CAN_CTRLMODE_TDC_AUTO and uses the
      calculated tdco value.

    - CAN_CTRLMODE_TDC_AUTO and tdco provided: set
      CAN_CTRLMODE_TDC_AUTO and use the provided tdco value. Here,
      tdcv is illegal and tdcf is optional.

    - CAN_CTRLMODE_TDC_MANUAL and both of tdcv and tdco provided: set
      CAN_CTRLMODE_TDC_MANUAL and use the provided tdcv and tdco
      value. Here, tdcf is optional.

    - CAN_CTRLMODE_TDC_{AUTO,MANUAL} are mutually exclusive. Whenever
      one flag is turned on, the other will automatically be turned
      off. Providing both returns an error.

    - Combination other than the one listed above are illegal and will
      return an error.

N.B. above rules mean that whenever CAN_CTRLMODE_FD is provided, the
previous TDC values will be overwritten. The only option to reuse
previous TDC value is to not provide CAN_CTRLMODE_FD.

All the new parameters are defined as u32. This arbitrary choice is
done to mimic the other bittiming values with are also all of type
u32. An u16 would have been sufficient to hold the TDC values.

This patch completes below series (c.f. [1]):
  - commit 289ea9e4 ("can: add new CAN FD bittiming parameters:
    Transmitter Delay Compensation (TDC)")
  - commit c25cc799 ("can: bittiming: add calculation for CAN FD
    Transmitter Delay Compensation (TDC)")

[1] https://lore.kernel.org/linux-can/20210224002008.4158-1-mailhol.vincent@wanadoo.fr/T/#t

Link: https://lore.kernel.org/all/20210918095637.20108-5-mailhol.vincent@wanadoo.frSigned-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The function can_calc_tdco() directly retrieves can_priv from the
net_device and directly modifies it.

This is annoying for the upcoming patch. In
drivers/net/can/dev/netlink.c:can_changelink(), the data bittiming are
written to a temporary structure and memcpyed to can_priv only after
everything succeeded. In the next patch, where we will introduce the
netlink interface for TDC parameters, we will add a new TDC block
which can potentially fail. For this reason, the data bittiming
temporary structure has to be copied after that to-be-introduced TDC
block. However, TDC also needs to access data bittiming information.

We change the prototype so that the data bittiming structure is passed
to can_calc_tdco() as an argument instead of retrieving it from
priv. This way can_calc_tdco() can access the data bittiming before it
gets memcpyed to priv.

Link: https://lore.kernel.org/all/20210918095637.20108-4-mailhol.vincent@wanadoo.frSigned-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In the current implementation, all Transmission Delay Compensation
(TDC) parameters are expressed in time quantum. However, ISO 11898-1
actually specifies that these should be expressed in *minimum* time
quantum.

Furthermore, the minimum time quantum is specified to be "one node
clock period long" (c.f. paragraph 11.3.1.1 "Bit time"). For sake of
simplicity, we prefer to use the "clock period" term instead of
"minimum time quantum" because we believe that it is more broadly
understood.

This patch fixes that discrepancy by updating the documentation and
the formula for TDCO calculation.

N.B. In can_calc_tdco(), the sample point (in time quantum) was
calculated using a division, thus introducing a risk of rounding and
truncation errors. On top of changing the unit to clock period, we
also modified the formula to use only additions.

Link: https://lore.kernel.org/all/20210918095637.20108-3-mailhol.vincent@wanadoo.frSuggested-by: NStefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

ISO 11898-1 specifies in section 11.3.3 "Transmitter delay
compensation" that "the configuration range for [the] SSP position
shall be at least 0 to 63 minimum time quanta."

Because SSP = TDCV + TDCO, it means that we should allow both TDCV and
TDCO to hold zero value in order to honor SSP's minimum possible
value.

However, current implementation assigned special meaning to TDCV and
TDCO's zero values:
  * TDCV = 0 -> TDCV is automatically measured by the transceiver.
  * TDCO = 0 -> TDC is off.

In order to allow for those values to really be zero and to maintain
current features, we introduce two new flags:
  * CAN_CTRLMODE_TDC_AUTO indicates that the controller support
    automatic measurement of TDCV.
  * CAN_CTRLMODE_TDC_MANUAL indicates that the controller support
    manual configuration of TDCV. N.B.: current implementation failed
    to provide an option for the driver to indicate that only manual
    mode was supported.

TDC is disabled if both CAN_CTRLMODE_TDC_AUTO and
CAN_CTRLMODE_TDC_MANUAL flags are off, c.f. the helper function
can_tdc_is_enabled() which is also introduced in this patch.

Also, this patch adds three fields: tdcv_min, tdco_min and tdcf_min to
struct can_tdc_const. While we are not convinced that those three
fields could be anything else than zero, we can imagine that some
controllers might specify a lower bound on these. Thus, those minimums
are really added "just in case".

Comments of struct can_tdc and can_tdc_const are updated accordingly.

Finally, the changes are applied to the etas_es58x driver.

Link: https://lore.kernel.org/all/20210918095637.20108-2-mailhol.vincent@wanadoo.frSigned-off-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

All timing calculation is done with unsigned integers, so change type
of tseg1 and alltseg to unsigned int, too.

Link: https://lore.kernel.org/all/20211013130653.1513627-1-mkl@pengutronix.de
Link: https://github.com/linux-can/can-utils/pull/314Reported-by: NGary Bisson <bisson.gary@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

hrtimer_forward_now() provides the same functionality as the open coded
hrimer_forward() invocation. Prepares for removal of hrtimer_forward() from
the public interfaces.

Link: https://lore.kernel.org/all/20210923153339.684546907@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-can@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: netdev@vger.kernel.org
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This allows explicitly specifying which children are present on the mdio
bus. Additionally, it allows for non-phy MDIO devices on the bus.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds an optional mdio bus child node. If present, the mac will
look for PHYs there instead of directly under the top-level node. This
eliminates any ambiguity about whether child nodes are PHYs, and allows
the MDIO bus to contain non-PHY devices.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 16nm internal EPHY that is present in 7712 is actually a 16nm
Gigabit PHY which has been forced to operate in 10/100 mode. Its
controls are therefore via the EXT_GPHY_CTRL registers and not via the
EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on
the 7712 compatible string to allow that differentiation to happen.

On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by
default, but this is not the case with this chip, so we need to make
sure we clear it to power on the EPHY.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7712 includes a GENETv5 adapter with an on-chip 10/100 16nm Ethernet PHY
which requires us to document that controller's integration specifically
for proper driver keying.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This converts users of mdiobus to mdiodev using the following semantic
patch:

@@
identifier mdiodev;
expression regnum;
@@

- mdiobus_read(mdiodev->bus, mdiodev->addr, regnum)
+ mdiodev_read(mdiodev, regnum)

@@
identifier mdiodev;
expression regnum, val;
@@

- mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val)
+ mdiodev_write(mdiodev, regnum, val)
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This refactors the phylink pcs helper functions to use mdiobus_* instead
of mdiodev_*.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds some helpers for accessing non-phy MDIO devices. They are
analogous to phy_(read|write|modify), except that they take an mdio_device
and not a phy_device.
Signed-off-by: NSean Anderson <sean.anderson@seco.com>
Reviewed-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With current KPU profile, we have 2 reserved entries which can
be loaded from firmware to parse custom headers. Adding changes
to increase these reserved entries to 6.
And also removed KPU entries for unused LTYPEs like
NPC_LT_LA_IH_8_ETHER, NPC_LT_LA_IH_4_ETHER, NPC_LT_LA_IH_2_ETHER
Signed-off-by: NKiran Kumar K <kirankumark@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Leon Romanovsky says:

====================
Delete impossible devlink notifications

This series is a followup to the delayed devlink notification scheme.

I removed the impossible notifications together with attempt to annotate
various calls in order to mark them as pre/post devlink_register().

Other notifications are called before and after delvink_register() so
they weren't changed in this pathcset.
====================

Link: https://lore.kernel.org/r/cover.1634825474.git.leonro@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The parameters are registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible parameters
notifications along with addition of code annotation logic.
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The trap logic is registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible trap group
notifications along with addition of code annotation logic.
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The trap policer logic is registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible notifications
along with addition of code annotation logic.
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The change of devlink_register() to be last devlink command together
with delayed notification logic made the publish API to be obsolete.
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.

Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: NStephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: NAntonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fix following coccicheck warning:
./drivers/net/dsa/sja1105/sja1105_main.c:1193:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before return.

Early exits from for_each_available_child_of_node should decrement the
node reference counter.

Fixes: 9ca482a2 ("net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for RGMII delays")
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211021094606.7118-1-wanjiabing@vivo.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Repalce kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Signed-off-by: NCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211021084158.2183-1-caihuoqing@baidu.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.16

Second set of patches for v5.16 and this time we have a big one. We
have the new Realtek driver rtw89 with over 90 kLOC and also over 150
patches for mt76. ath9k also got few new small features. And the usual
cleanups and fixes all over.

Major changes:

rtw89
 * new Realtek 802.11ax driver
 * supports Realtek 8852AE 802.11ax 2x2 chip

ath9k
 * add option to reset the wifi chip via debugfs
 * convert Device Tree bindings to the json-schema
 * support Device Tree ieee80211-freq-limit property to limit channels

mt76
 * mt7921 aspm support
 * mt7921 testmode support
 * mt7915 LED support
 * mt7921 6GHz band support
 * support for eeprom data in DT
 * mt7915 TWT support
 * mt7921s SDIO support

* tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (213 commits)
  zd1201: use eth_hw_addr_set()
  wl3501_cs: use eth_hw_addr_set()
  ray_cs: use eth_hw_addr_set()
  ...
====================

Link: https://lore.kernel.org/r/20211022075845.0E679C4360D@smtp.codeaurora.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Quite a few changes:
 * the applicable eth_hw_addr_set() and const hw_addr changes
 * various code cleanups/refactorings
 * stack usage reductions across the wireless stack
 * some unstructured find_ie() -> structured find_element()
   changes
 * a few more pieces of multi-BSSID support
 * some 6 GHz regulatory support
 * 6 GHz support in hwsim, for testing userspace code
 * Light Communications (LC, 802.11bb) early band definitions
   to be able to add a first driver soon

* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
  cfg80211: fix kernel-doc for MBSSID EMA
  mac80211: Prevent AP probing during suspend
  nl80211: Add LC placeholder band definition to nl80211_band
  ...
====================

Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Don't write directly to netdev->dev_addr.

More conversions, mostly in usb/net.

v2: leave out catc (patch 4)

Link: https://lore.kernel.org/r/20211021131214.2032925-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Get these two oldies ready for constant netdev->dev_addr.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Make sure local references to netdev->dev_addr are constant.
Acked-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: NMaciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Manually fix all net/usb drivers without separate maintainers.

v2: catc does DMA to the buffer, leave the conversion to Oliver
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Silent merge conflict between these two:

  3d677735 ("net/mlx5: Lag, move lag files into directory")
  14fe2471 ("net/mlx5: Lag, change multipath and bonding to be mutually exclusive")
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

M<erge issues...
Signed-off-by: NDavid S. Miller <davem@davemloft.net>