Simple inline that checks if kfifo_init() has been executed on a fifo.

This is useful for walking all per CPU fifos, when some of them might not
have been brought up yet.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some upcoming code it's useful to peek into a FIFO without permanentely
removing data.  This patch implements a new kfifo_out_peek() to do this.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now for kfifo_*_user it's not easily possible to distingush between
a user copy failing and the FIFO not containing enough data.  The problem
is that both conditions are multiplexed into the same return code.

Avoid this by moving the "copy length" into a separate output parameter
and only return 0/-EFAULT in the main return value.

I didn't fully adapt the weird "record" variants, those seem
to be unused anyways and were rather messy (should they be just removed?)

I would appreciate some double checking if I did all the conversions
correctly.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pointers to user buffers are currently unsigned char *, which requires
a lot of casting in the caller for any non-char typed buffers.  Use void *
instead.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NStefani Seibold <stefani@seibold.net>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Walls <awalls@radix.net>
Cc: Vikram Dhillon <dhillonv10@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I get a few dozen of these warnings when using
  gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):

In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static

so make the function static inline.

[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4)
Kernel panic - not syncing: EDAC MC0: Uncorrected Error  (XEN) Domain 0 crashed: 'noreboot' set - not rebooting.

This happens because FERR_NF_FBD bit 28 is not updated on i5000.  Due to
that, both bits 28 and 29 may be equal to one, returning channel = 3.  As
this value is invalid, EDAC core generates the panic.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568Signed-off-by: NTamas Vincze <tom@vincze.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The m68knommu coldfire pit clocksource looks like it was incorrectly
marked as a continuous clocksource.  Running with it marked as a
continuous clocksource could cause hangs when the system switches to
highres mode or enables nohz.

This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit
clocksource.  This will disallow systems using this clocksource from
entering oneshot mode (disabling highres timers and nohz).
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Acked-by: NGreg Ungerer <gerg@snapgear.com>
Cc: Steven King <sfking@fdwdc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a new two finger touch Fujitsu Wacom Tablet PC.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I try to use markup_oops.pl in x86, I always get:

cat 1 | perl markup_oops.pl ./vmlinux
objdump: --start-address: bad number: NaN
No matching code found

This is because in line:
	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) {
 		$function = $1;
 		$func_offset = $2;
 	}

$func_offset will get a number like "0x2"

But in follow code:

my $decodestart = Math::BigInt->from_hex("0x$target") -
Math::BigInt->from_hex("0x$func_offset");

It add other ox to ox2.  Then this value will be set to NaN.

So I made a small patch to fix it.
Signed-off-by: NHui Zhu <teawater@gmail.com>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a regression in hardware acceleration which made the accelerated
framebuffer unusable on some chips.  These need extra initialization and
an extra flag which is no longer needed/available on current chips.
Signed-off-by: NErik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reorder viafb_set_par to allow using the updated variables in
viafb_setmode.  This fixes a regression that prevented proper runtime mode
changes.
Signed-off-by: NErik-Jan Post <ej.lfs@xs4all.nl>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Although I'd consider this a hardware bug, as there is hardware out that
for whatever reason does not support hardware cursors on LCD output we
have to care about it in the driver.  This fixes a regression (invisible
cursor) introduced by:

    viafb: cleanup viafb_cursor
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reported-by: NJulian Wollrath <jwollrath@web.de>
Tested-by: NJulian Wollrath <jwollrath@web.de>
Cc: Scott Fang <ScottFang@viatech.com.cn>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a wrong optimization in include/linux/kfifo.h which could cause a race
in kfifo_out_locked.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Reported-by: NJohan Hovold <jhovold@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.

* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: MINI2440: Fixup __initdata usage
  ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
  ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
  ARM: S3C: NAND: Check the existence of nr_map before copying

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix left/right horizontal scroll mapping
  Input: pmouse - move Sentelic probe down the list
  Input: add compat support for sysfs and /proc capabilities output
  Input: i8042 - add Dritek quirk for Acer Aspire 5610.
  Input: xbox - do not use GFP_KERNEL under spinlock
  Input: psmouse - fix Synaptics detection when protocol is disabled
  Input: bcm5974 - report ABS_MT events
  Input: davinci_keyscan - add device_enable method to platform data
  Input: evdev - be less aggressive about sending SIGIO notifies
  Input: atkbd - fix canceling event_work in disconnect
  Input: serio - fix potential deadlock when unbinding drivers
  Input: gf2k - fix &&/|| confusion in gf2k_connect()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: cpumask_of_node() should handle -1 as a node
  alpha: add myself as a maintainer, and drop mention of 2.4

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.
  sh: mach-ecovec24: Add motion sensor driver support.

This enables possible 36bit address mask on 965G that use physical
address for hw status page.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

inotify will WARN() if it finds that the idr and the fsnotify internals
somehow got out of sync.  It was only supposed to do this once but due
to this stupid bug it would warn every single time a problem was
detected.
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 7e790dd5 ("inotify: fix
error paths in inotify_update_watch") inotify changed the manor in which
it gave watch descriptors back to userspace.  Previous to this commit
inotify acted like the following:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 2

but after this patch inotify would return watch descriptors like so:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 1

which I saw as equivalent to opening an fd where

  open(file) = 1;
  close(1);
  open(file) = 1;

seemed perfectly reasonable.  The issue is that quite a bit of userspace
apparently relies on the behavior in which watch descriptors will not be
quickly reused.  KDE relies on it, I know some selinux packages rely on
it, and I have heard complaints from other random sources such as debian
bug 558981.

Although the man page implies what we do is ok, we broke userspace so
this patch almost reverts us to the old behavior.  It is still slightly
racey and I have patches that would fix that, but they are rather large
and this will fix it for all real world cases.  The race is as follows:

 - task1 creates a watch and blocks in idr_new_watch() before it updates
   the hint.
 - task2 creates a watch and updates the hint.
 - task1 updates the hint with it's older wd
 - task removes the watch created by task2
 - task adds a new watch and will reuse the wd originally given to task2

it requires moving some locking around the hint (last_wd) but this should
solve it for the real world and be -stable safe.

As a side effect this patch papers over a bug in the lib/idr code which
is causing a large number WARN's to pop on people's system and many
reports in kerneloops.org.  I'm working on the root cause of that idr
bug seperately but this should make inotify immune to that issue.
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

eDP could be on pipe A or B.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Original DP mode_valid check didn't take pixel color depth into account,
which made one 1600x900 eDP panel's mode check invalid because of overclock,
but actually this 6bpc panel does can work with x1 lane at 2.7G. This one
trys to take bpp value properly both in mode validation and mode setting.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Many platform support this feature, and it can provide significant
power savings when the reduced refresh rate is low.  However, on some
platforms a secondary (reduced) timing is provided but not actually
supported by the hardware.  This results in undesirable flicker at
runtime.

So disable the feature by default, but allow users to opt-in to the
reduced clock behavior with a new module parameter, lvds_downclock,
that can be set to 1 to enable the feature.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

Suggested-by: NChris Wilson <chris@chris-wilson.co.uk&gt;>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle)
Signed-off-by: NEric Anholt <eric@anholt.net>

On Ironlake, there is an interrupt master control bit. With the bit
disabled before clearing IIR, we do not need to handle extra interrupt
in a loop. This patch removes the loop in Ironlake interrupt handler.
It fixed irq lost issue on some Ironlake platforms.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: NZou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Add a missing iterator variable thus fixing the conditional of the
for-loop in amd64_get_scrub_rate().
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Remove some of the __initdata tags which are currently inappropriate for
platform_device and some of the platform data. These can be returned once
support for copying platform devices and data is added.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch fix mini2440 crash on boot due to improper __initdata
qualifier on mini2440_led1_pdata.
Signed-off-by: NUri Yosef <uri.yosef@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Since the fixed voltage regulator grew support for GPIO based
enables and GPIO 0 is valid on some systems we need to specify
that there is no valid GPIO enable control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF
ports. If an incorrect size is used, the serial core will enforce an
early shutdown on the port, especially with baudrates < 9600.
Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds support for the lis3lv02d motion sensor connected via
i2c on the Ecovec board. Tested with evtest.
Signed-off-by: NNISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
CC: linux-alpha@vger.kernel.org
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAnton Blanchard <anton@samba.org>

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: linux-alpha@vger.kernel.org
Signed-off-by: NMatt Turner <mattst88@gmail.com>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape_char: add missing compat_ptr conversion
  [S390] zcrypt: add sanity check before copy_from_user()
  [S390] unwire sys_recvmmsg again
  [S390] con3215: remove empty ioctl function
  [S390] dasd: add proper compat pointer conversion for symmetrix ioctl
  [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls
  [S390] bug: implement arch specific __WARN macro
  [S390] Move __cpu_logical_map to smp.c
  [S390] tape_block: remove ioctl function
  [S390] smp: remove volatile type quilifier from __cpu_logical_map
  [S390] smp: setup smp_processor_id early
  [S390] use helpers for rlimits
  [S390] fs3270: add missing compat ptr conversion
  [S390] vmcp: add missing compat ptr conversion
  [S390] cio: add missing compat ptr conversion
  [S390] dasd: add missing compat ptr conversion
  [S390] remove superfluous TIF_USEDFPU bit
  [S390] duplicate SIGTRAP on signal delivery.
  [S390] clear TIF_SINGLE_STEP for new process.
  [S390] fix loading of PER control registers for utrace.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n
  ipv6: skb_dst() can be NULL in ipv6_hop_jumbo().
  tg3: Update copyright and driver version
  tg3: Disable 5717 serdes and B0 support
  tg3: Add reliable serdes detection for 5717 A0
  tg3: Fix std rx prod ring handling
  tg3: Fix std prod ring nicaddr for 5787 and 57765
  sfc: Fix conditions for MDIO self-test
  sfc: Fix polling for slow MCDI operations
  e1000e: workaround link issues on busy hub in half duplex on 82577/82578
  e1000e: MDIO slow mode should always be done for 82577
  ixgbe: update copyright dates
  ixgbe: Do not attempt to perform interrupts in netpoll when down
  cfg80211: fix refcount imbalance when wext is disabled
  mac80211: fix queue selection for data frames on monitor interfaces
  iwlwifi: silence buffer overflow warning
  iwlwifi: disable tx on beacon update notification
  iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr
  mac80211: fix endian error
  mac80211: add missing sanity checks for action frames
  ...

Since the structure field nr_map is optional, we need to check whether the
chip number map is provided to avoid unexpected NULL pointer exception.
Signed-off-by: NRamax Lo <ramaxlo@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>