Skip to content

K
Kernel

openeuler / Kernel
11 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 27 6月, 2011 1 次提交
  3. 14 6月, 2011 1 次提交
  5. 13 6月, 2011 2 次提交
    • S
      HID: hid-sony: fix endiannes of Sixaxis accel/gyro values · c9e4d877
      由 Simon Wood 提交于 
      The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.

Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.

Gyro on my device always reports -32768, might need some calibration
set within the controller.

Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/Signed-off-by: NMarcin Tolysz <tolysz@gmail.com>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      c9e4d877
    • S
      HID: hid-sony: amend Sixaxis descriptor to enable accelerometers · 61ab44be
      由 Simon Wood 提交于 
      Modify the HID descriptor of the Sixaxis controller to allow the
reporting of the accelerometers and gyro via a joystick axis.

Rewrite section from offset 83:
--
0x75, 0x08,         /* Report Size (8),         */
/* all the other data lumped together */
0x95, 0x27,         /* Report Count (39),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Output */
0x91, 0x02,         /* Output (Variable),       */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Feature */
0xB1, 0x02,         /* Feature (Variable),      */
--
with
--
/* last 2 not used... */
0x95, 0x13,         /* Report Count (19),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
/* Padding */
0x95, 0x0C,         /* Report Count (12),       */
0x81, 0x01,         /* Input (Constant),        */
0x75, 0x10,         /* Report Size (16),        */
0x95, 0x04,         /* Report Count (4),        */
0x26, 0xFF, 0x03,   /* Logical Maximum (1023),  */
0x46, 0xFF, 0x03,   /* Physical Maximum (1023), */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
--
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      61ab44be
  7. 08 6月, 2011 1 次提交
    • S
      HID: Add driver to fix Speedlink VAD Cezanne support · 74bc6953
      由 Stefan Kriwanek 提交于 
      Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored.  The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: NStefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      74bc6953
  9. 07 6月, 2011 2 次提交
    • M
      HID: Fix Logitech Driving Force Pro wheel · dc0a4f0c
      由 Michael Bauer 提交于 
      - Add the quirk "NOGET" to make the wheel work at all in native mode.
- Replace the somehow broken report descriptor with a custom one to have
  separate throttle and brake axes.

As there are significant differences in the descriptor (original descriptor
"hides" the separate axes in a  24 bit FF00 usagepage, new descripter replaces
that with two individual 8 bit desktop.y and desktop.rz usages) I provided a
complete replacement descriptor instead trying to patch the original one.
Patching the descriptor seems not feasible as the new one is much larger.

Note: To actually test this you have to use the tool "ltwheelconf" to put the
DFP into it's native mode - See below for more info.

Background:
Most Logitech wheels are initially reporting themselves with a "fallback"
deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they
are working even without having the proper driver installed.

If the Logitech driver is installed it sends a special command to the wheel
which sets the wheel to "native mode", enabling enhance features like:
- Clutch pedal
- extended wheel rotation range (up to 900 degrees)
- H-gate shifter
- separate axis for throttle / brake
- all buttons

When the wheel is set to native mode it basically disconnects and reconnects
with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this
case).

I am working on a userspace tool [1] which does the switching from fallback to
native mode. During development I found out that the Driving Force Pro wheel
is not supported in native mode - quierk NOGET is missing and the throttle and
brake axes are reported in a combined way only.
Signed-off-by: NMichael Bauer <michael@m-bauer.org>
Signed-off-by: NSimon Wood <simon@mungewell.org>

[1] https://github.com/TripleSpeeder/LTWheelConfSigned-off-by: NJiri Kosina <jkosina@suse.cz>
      dc0a4f0c
    • T
      HID: yurex: recognize GeneralKeys wireless presenter as generic HID · 6dc1418e
      由 Tomoki Sekiyama 提交于 
      Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit 6bc235a2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.

I believe that we can distinguish YUREX and the Wireless Presenter by
device type.  The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID.  (I don't have
the Wireless Presenter, so not yet ested.)

** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0c45 Microdia
   idProduct          0x1010
   bcdDevice            0.03
   iManufacturer           1 JESS
   iProduct                2 YUREX
   iSerial                 3 10000269
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      1 Boot Interface Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.10
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      31
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              10
Device Status:     0x0002
   (Bus Powered)
   Remote Wakeup Enabled

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: NThomas B?chler <thomas@archlinux.org>
Tested-by: NThomas B?chler <thomas@archlinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      6dc1418e
  11. 24 5月, 2011 33 次提交