Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 07 1月, 2011 1 次提交
    • D
      x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulation · d906f0eb
      由 David Rientjes 提交于 
      "x86, numa: Fake node-to-cpumask for NUMA emulation" broke the
build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU
is not.  This is because it is possible to map a cpu to multiple
nodes when NUMA emulation is used; the patch required a physical
node address table to find those nodes that was only available
when CONFIG_NUMA_EMU was enabled.

This extracts the common debug functionality to its own function
for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.

NUMA emulation will now iterate over the set of possible nodes
for each cpu and call the new debug function whereas only the
cpu's node will be used without NUMA emulation enabled.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d906f0eb
  3. 24 12月, 2010 5 次提交
    • D
      x86, numa: Fix cpu to node mapping for sparse node ids · a387e95a
      由 David Rientjes 提交于 
      NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable.  If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node.  This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.

The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.

This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node.  Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.

This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated.  ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.

When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned.  This is important for node_distance() to
function as desired.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      a387e95a
    • D
      x86, numa: Fake node-to-cpumask for NUMA emulation · c1c3443c
      由 David Rientjes 提交于 
      It's necessary to fake the node-to-cpumask mapping so that an emulated
node ID returns a cpumask that includes all cpus that have affinity to
the memory it represents.

This is a little intrusive because it requires knowledge of the physical
topology of the system.  setup_physnodes() gives us that information, but
since NUMA emulation ends up altering the physnodes array, it's necessary
to reset it before cpus are brought online.

Accordingly, the physnodes array is moved out of init.data and into
cpuinit.data since it will be needed on cpuup callbacks.

This works regardless of whether numa=fake is used on the command line,
or the setup of the fake node succeeds or fails.  The physnodes array
always contains the physical topology of the machine if CONFIG_NUMA_EMU
is enabled and can be used to setup the correct node-to-cpumask mappings
in all cases since setup_physnodes() is called whenever the array needs
to be repopulated with the correct data.

To fake the actual mappings, numa_add_cpu() and numa_remove_cpu() are
rewritten for CONFIG_NUMA_EMU so that we first find the physical node to
which each cpu has local affinity, then iterate through all online nodes
to find the emulated nodes that have local affinity to that physical
node, and then finally map the cpu to each of those emulated nodes.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701520.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      c1c3443c
    • D
      x86, numa: Fake apicid and pxm mappings for NUMA emulation · f51bf307
      由 David Rientjes 提交于 
      This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms.  The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.

This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance().  This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.

A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type.  If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.

Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      f51bf307
    • D
      x86, numa: Avoid compiling NUMA emulation functions without CONFIG_NUMA_EMU · 4e76f4e6
      由 David Rientjes 提交于 
      Both acpi_get_nodes() and amd_get_nodes() are only necessary when
CONFIG_NUMA_EMU is enabled, so avoid compiling them when the option is
disabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701210.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      4e76f4e6
    • D
      x86, numa: Reduce minimum fake node size to 32M · 34dc9e74
      由 David Rientjes 提交于 
      This patch changes the minimum fake node size from 64MB to 32MB so it is
possible to test NUMA code at a greater scale on smaller machines
(64 nodes on a 2G machine, 1024 nodes on 32G machine with
CONFIG_NODES_SHIFT=10).
Signed-off-by: NDavid Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221700590.3701@chino.kir.corp.google.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      34dc9e74
  5. 10 12月, 2010 9 次提交
  7. 07 12月, 2010 1 次提交
  9. 06 12月, 2010 3 次提交
  11. 20 11月, 2010 1 次提交
  13. 19 11月, 2010 1 次提交
  15. 18 11月, 2010 4 次提交
  17. 17 11月, 2010 2 次提交
  19. 15 11月, 2010 1 次提交
  21. 13 11月, 2010 3 次提交
  23. 12 11月, 2010 7 次提交
  25. 11 11月, 2010 2 次提交