change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Eliminate following warning:
warning: Shifting signed 32-bit value by 31 bits is undefined behavior
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The driver waits for the TPC vector pipe to be empty before checking if the
TPC kernel has finished executing, but the code doesn't validate that the
pipe was indeed empty, it just wait for it without checking the return
value.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

new_dma_pkt->ctl is assigned a value and then is reassigned a new value
without the first value ever being used.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Use the standard FIELD_PREP() macro instead of << operator to perform
bitmask operations. This ensures type check safety and eliminate compiler
warnings.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Use the standard macros to define bitmasks.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

If both parts of if-else are goto statements, we can remove the else and
put the else goto statement after the if statement.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

%u is used for unsigned so we need to cast the int variable to u32 to avoid
compiler warning.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Although the possible values for CB's ID are only 32 bits, there are a few
places in the code where this field is shifted and passed into a function
which expects 64 bits.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

If there is a failure during the testing of a queue,
to ease up debugging - print the queue id.
Signed-off-by: NDotan Barak <dbarak@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Allow user application to write to this register in order
to be able to configure the quiet period of the QMAN between grants.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

driver will now get notified upon any PCI error occurred and
will respond according to the severity of the error.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

habanalabs driver uses dma-fence mechanism for synchronization.
dma-fence mechanism was designed solely for GPUs, hence we purpose
a simpler mechanism based on completions to replace current
dma-fence objects.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Future ASIC names are longer than 15 chars so increase the variable length
to 32 chars.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>

uio_register_device() do two things.
1) get an uio id from a global pool, e.g. the id is <A>
2) create file nodes like /sys/class/uio/uio<A>

uio_unregister_device() do two things.
1) free the uio id <A> and return it to the global pool
2) free the file node /sys/class/uio/uio<A>

There is a situation is that one worker is calling uio_unregister_device(),
and another worker is calling uio_register_device().
If the two workers are X and Y, they go as below sequence,
1) X free the uio id <AAA>
2) Y get an uio id <AAA>
3) Y create file node /sys/class/uio/uio<AAA>
4) X free the file note /sys/class/uio/uio<AAA>
Then it will failed at the 3rd step and cause the phenomenon we saw as it
is creating a duplicated file node.

Failure reports as follows:
sysfs: cannot create duplicate filename '/class/uio/uio10'
Call Trace:
   sysfs_do_create_link_sd.isra.2+0x9e/0xb0
   sysfs_create_link+0x25/0x40
   device_add+0x2c4/0x640
   __uio_register_device+0x1c5/0x576 [uio]
   adf_uio_init_bundle_dev+0x231/0x280 [intel_qat]
   adf_uio_register+0x1c0/0x340 [intel_qat]
   adf_dev_start+0x202/0x370 [intel_qat]
   adf_dev_start_async+0x40/0xa0 [intel_qat]
   process_one_work+0x14d/0x410
   worker_thread+0x4b/0x460
   kthread+0x105/0x140
 ? process_one_work+0x410/0x410
 ? kthread_bind+0x40/0x40
 ret_from_fork+0x1f/0x40
 Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef
 e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7
 ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace a7531c1ed5269e84 ]---
 c6xxvf b002:00:00.0: Failed to register UIO devices
 c6xxvf b002:00:00.0: Failed to register UIO devices
Signed-off-by: NLang Dai <lang.dai@intel.com>

Link: https://lore.kernel.org/r/1600054002-17722-1-git-send-email-lang.dai@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

of_parse_phandle() returns device_node with incremented ref count
which needs to be decremented by of_node_put() when device_node
is not used.

Fixes: e2a5402e ("nvmem: Add nvmem_device based consumer apis.")
Signed-off-by: NVadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-5-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-4-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kobj_to_dev() instead of container_of()
Signed-off-by: NTian Tao <tiantao6@hisilicon.com>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-3-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is to remove function "mtk_reg_write" since
Mediatek EFUSE hardware only supports read functionality
for NVMEM consumers.

Fixes: ba360fd0 ("nvmem: mtk-efuse: remove nvmem regmap dependency")
Acked-by: NAndrew-CT Chen <andrew-ct.chen@mediatek.com>
Signed-off-by: NChih-En Hsu <chih-en.hsu@mediatek.com>
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-2-srinivas.kandagatla@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Set type as NVMEM_TYPE_EEPROM to expose this info via
sysfs:

$ cat /sys/bus/nvmem/devices/{DEVICE}/type
EEPROM
Signed-off-by: NVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200916170933.20302-4-vadym.kochan@plvision.euSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Set type as NVMEM_TYPE_EEPROM to expose this info via
sysfs:

$ cat /sys/bus/nvmem/devices/{DEVICE}/type
EEPROM
Signed-off-by: NVadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200916170933.20302-3-vadym.kochan@plvision.euSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The initialisation code checks TRCIDR4 to determine the number of resource
selectors available on the system. Since ETM v 4.3, the value 0 has a
different meaning. This patch takes into account this change.
Signed-off-by: NMike Leach <mike.leach@linaro.org>
[Removed '.' in patch title, added stable]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-17-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The member @nr_resource represents how many resource selector pairs,
and the pair 0 is always implemented and reserved.
So let's multiply by 2 when resetting the selector configuration.
And also update the validation of the input @idx.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NJonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed typographical error in changelog, added stable]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-16-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Coresight driver assumes sink is common across all the ETMs,
and tries to build a path between ETM and the first enabled
sink found using bus based search. This breaks sysFS usage
on implementations that has multiple per core sinks in
enabled state.

To fix this, coresight_get_enabled_sink API is updated to
do a connection based search starting from the given source,
instead of bus based search.
With sink selection using sysfs depecrated for perf interface,
provision for reset is removed as well in this API.
Signed-off-by: NLinu Cherian <lcherian@marvell.com>
[Fixed indentation problem and removed obsolete comment]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-15-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When using the perf interface, sink selection using sysfs is
deprecated.
Signed-off-by: NLinu Cherian <lcherian@marvell.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-14-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add CoreSight mailing list so that people can participate in patch
reviews and know what features are coming next.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-13-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid
accessing the reserved register.

Fixes: f188b5e7 ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NJonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed capital letter in title]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-12-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the specified/hinted sink is not reachable from a subset of the CPUs,
we could end up unable to trace the event on those CPUs. This
is the best effort we could do until we support 1:1 configurations.
Fail gracefully in such cases avoiding a WARN_ON, which can be easily
triggered by the user on certain platforms (Arm N1SDP), with the following
trace paths :

 CPU0
      \
       -- Funnel0 --> ETF0 -->
      /                        \
 CPU1                           \
                                  MainFunnel
 CPU2                           /
      \                        /
       -- Funnel1 --> ETF1 -->
      /
 CPU1

$ perf record --per-thread -e cs_etm/@ETF0/u -- <app>

could trigger the following WARNING, when the event is scheduled
on CPU2.

[10919.513250] ------------[ cut here ]------------
[10919.517861] WARNING: CPU: 2 PID: 24021 at
drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100
...

[10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24
[10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[10919.575865] pc : etm_event_start+0xf8/0x100
[10919.580034] lr : etm_event_start+0x80/0x100
[10919.584202] sp : fffffe001932f940
[10919.587502] x29: fffffe001932f940 x28: fffffc834995f800
[10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0
[10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448
[10919.603391] x23: 0000000000000002 x22: fffffc8353529c00
[10919.608688] x21: fffffc835bb31000 x20: 0000000000000000
[10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000
[10919.619281] x17: 0000000000000000 x16: 0000000000000000
[10919.624577] x15: 0000000000000000 x14: 00000000000009f8
[10919.629874] x13: 00000000000009f8 x12: 0000000000000018
[10919.635170] x11: 0000000000000000 x10: 0000000000000000
[10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000
[10919.645763] x7 : 0000000000000020 x6 : 0000000000000001
[10919.651059] x5 : 0000000000000002 x4 : 0000000000000001
[10919.656356] x3 : 0000000000000000 x2 : 0000000000000000
[10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000
[10919.666949] Call trace:
[10919.669382]  etm_event_start+0xf8/0x100
[10919.673203]  etm_event_add+0x40/0x60
[10919.676765]  event_sched_in.isra.134+0xcc/0x210
[10919.681281]  merge_sched_in+0xb0/0x2a8
[10919.685017]  visit_groups_merge.constprop.140+0x15c/0x4b8
[10919.690400]  ctx_sched_in+0x15c/0x170
[10919.694048]  perf_event_sched_in+0x6c/0xa0
[10919.698130]  ctx_resched+0x60/0xa0
[10919.701517]  perf_event_exec+0x288/0x2f0
[10919.705425]  begin_new_exec+0x4c8/0xf58
[10919.709247]  load_elf_binary+0x66c/0xf30
[10919.713155]  exec_binprm+0x15c/0x450
[10919.716716]  __do_execve_file+0x508/0x748
[10919.720711]  __arm64_sys_execve+0x40/0x50
[10919.724707]  do_el0_svc+0xf4/0x1b8
[10919.728095]  el0_sync_handler+0xf8/0x124
[10919.732003]  el0_sync+0x140/0x180

Even though we don't support using separate sinks for the ETMs yet (e.g,
for 1:1 configurations), we should at least honor the user's choice and
handle the limitations gracefully, by simply skipping the tracing on ETMs
which can't reach the requested sink.

Fixes: f9d81a65 ("coresight: perf: Allow tracing on hotplugged CPUs")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().

[  988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G        W    L
5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1
[  988.346364] Hardware name: Thundercomm Dragonboard 845c (DT)
[  988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
[  988.357689] pc : smp_call_function_single+0x158/0x1b8
[  988.362782] lr : smp_call_function_single+0x124/0x1b8
...
[  988.451638] Call trace:
[  988.454119]  smp_call_function_single+0x158/0x1b8
[  988.458866]  cti_enable+0xb4/0xf8 [coresight_cti]
[  988.463618]  coresight_control_assoc_ectdev+0x6c/0x128 [coresight]
[  988.469855]  coresight_enable+0x1f0/0x364 [coresight]
[  988.474957]  enable_source_store+0x5c/0x9c [coresight]
[  988.480140]  dev_attr_store+0x14/0x28
[  988.483839]  sysfs_kf_write+0x38/0x4c
[  988.487532]  kernfs_fop_write+0x1c0/0x2b0
[  988.491585]  vfs_write+0xfc/0x300
[  988.494931]  ksys_write+0x78/0xe0
[  988.498283]  __arm64_sys_write+0x18/0x20
[  988.502240]  el0_svc_common+0x98/0x160
[  988.506024]  do_el0_svc+0x78/0x80
[  988.509377]  el0_sync_handler+0xd4/0x270
[  988.513337]  el0_sync+0x164/0x180

This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.

Fixes: 6a0953ce ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
[Re-ordered variable declaration]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-10-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.

Fixes: a77de263 ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NJonathan Zhou <jonathan.zhouwen@huawei.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-9-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.

This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.

The use of the mode sysfs file is also similarly affected.

A helper function is added to fix both instances.

Fixes: ae204151 ("coresight: etmv4: Update default filter and initialisation")
Reported-by: NLeo Yan <leo.yan@linaro.org>
Tested-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NMike Leach <mike.leach@linaro.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Below BUG is triggered by call pm_runtime_get_sync() in
cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt
disabled. Pm_runtime_get_sync() calls clock driver to enable clock
which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw()
since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put()
is called in cti_disabled. No need to increase pm count when CPU gets
online since it's not decreased when CPU is offline.

[  105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002
[  105.800290] Modules linked in:
[  105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W
5.9.0-rc1-gff1304be0a05-dirty #21
[  105.800337] Hardware name: Thundercomm Dragonboard 845c (DT)
[  105.800353] Call trace:
[  105.800414]  dump_backtrace+0x0/0x1d4
[  105.800439]  show_stack+0x14/0x1c
[  105.800462]  dump_stack+0xc0/0x100
[  105.800490]  __schedule_bug+0x58/0x74
[  105.800523]  __schedule+0x590/0x65c
[  105.800538]  schedule+0x78/0x10c
[  105.800553]  schedule_timeout+0x188/0x250
[  105.800585]  qmp_send.constprop.10+0x12c/0x1b0
[  105.800599]  qmp_qdss_clk_prepare+0x18/0x20
[  105.800622]  clk_core_prepare+0x48/0xd4
[  105.800639]  clk_prepare+0x20/0x34
[  105.800663]  amba_pm_runtime_resume+0x54/0x90
[  105.800695]  __rpm_callback+0xdc/0x138
[  105.800709]  rpm_callback+0x24/0x78
[  105.800724]  rpm_resume+0x328/0x47c
[  105.800739]  __pm_runtime_resume+0x50/0x74
[  105.800768]  cti_starting_cpu+0x40/0xa4
[  105.800795]  cpuhp_invoke_callback+0x84/0x1e0
[  105.800814]  notify_cpu_starting+0x9c/0xb8
[  105.800834]  secondary_start_kernel+0xd8/0x164
[  105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]

Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-7-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Coresight_claim_device() is called in cti_starting_cpu() only
when CTI is enabled while coresight_disclaim_device() is called
uncontionally in cti_dying_cpu(). This triggered below WARNING.
Only call disclaim device when CTI device is enabled to fix it.

[   75.989643] WARNING: CPU: 1 PID: 14 at
kernel/drivers/hwtracing/coresight/coresight.c:209
coresight_disclaim_device_unlocked+0x10/0x24
[   75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted
5.9.0-rc1-gff1304be0a05-dirty #21
[   75.989709] Hardware name: Thundercomm Dragonboard 845c (DT)
[   75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--)
[   75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24
[   75.989775] lr : coresight_disclaim_device+0x24/0x38
[   75.989783] sp : ffff800011cd3c90
.
[   75.990018] Call trace:
[   75.990041]  coresight_disclaim_device_unlocked+0x10/0x24
[   75.990066]  cti_dying_cpu+0x34/0x4c
[   75.990101]  cpuhp_invoke_callback+0x84/0x1e0
[   75.990121]  take_cpu_down+0x90/0xe0
[   75.990154]  multi_cpu_stop+0x134/0x160
[   75.990171]  cpu_stopper_thread+0xb0/0x13c
[   75.990196]  smpboot_thread_fn+0x1c4/0x270
[   75.990222]  kthread+0x128/0x154
[   75.990251]  ret_from_fork+0x10/0x18

Fixes: e9b88058 ("coresight: cti: Add CPU Hotplug handling to CTI driver")
Reviewed-by: NMike Leach <mike.leach@linaro.org>
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-6-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add ETMv4 periperhal ID for HiSilicon Hip08 and Hip09 platform. Hip08
contains ETMv4.2 device and Hip09 contains ETMv4.5 device.
Acked-by: NSuzuki K Poulose <suzuki.oulose@arm.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-5-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since port-numbers start from 0, add 1 to port-number to get the port
count.

Fix following crash when Coresight is enabled on ACPI based systems:

[   61.061736] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[   61.135494] pc : acpi_coresight_parse_graph+0x1c4/0x37c
[   61.140705] lr : acpi_coresight_parse_graph+0x160/0x37c
[   61.145915] sp : ffff800012f4ba40
[   61.145917] x29: ffff800012f4ba40 x28: ffff00becce62f98
[   61.159896] x27: 0000000000000005 x26: ffff00becd8a7c88
[   61.165195] x25: ffff00becd8a7d88 x24: ffff00becce62f80
[   61.170492] x23: ffff800011ef99c0 x22: ffff009efb8bc010
[   61.175790] x21: 0000000000000018 x20: 0000000000000005
[   61.181087] x19: ffff00becce62e80 x18: 0000000000000020
[   61.186385] x17: 0000000000000001 x16: 00000000000002a8
[   61.191682] x15: ffff000838648550 x14: ffffffffffffffff
[   61.196980] x13: 0000000000000000 x12: ffff00becce62d87
[   61.202277] x11: 00000000ffffff76 x10: 000000000000002e
[   61.207575] x9 : ffff8000107e1a68 x8 : ffff00becce63000
[   61.212873] x7 : 0000000000000018 x6 : 000000000000003f
[   61.218170] x5 : 0000000000000000 x4 : 0000000000000000
[   61.223467] x3 : 0000000000000000 x2 : 0000000000000000
[   61.228764] x1 : ffff00becce62f80 x0 : 0000000000000000
[   61.234062] Call trace:
[   61.236497]  acpi_coresight_parse_graph+0x1c4/0x37c
[   61.241361]  coresight_get_platform_data+0xdc/0x130
[   61.246225]  tmc_probe+0x138/0x2dc
[   61.246227]  amba_probe+0xdc/0x220
[   61.255779]  really_probe+0xe8/0x49c
[   61.255781]  driver_probe_device+0xec/0x140
[   61.255782]  device_driver_attach+0xc8/0xd0
[   61.255785]  __driver_attach+0xac/0x180
[   61.265857]  bus_for_each_dev+0x78/0xcc
[   61.265859]  driver_attach+0x2c/0x40
[   61.265861]  bus_add_driver+0x150/0x244
[   61.265863]  driver_register+0x80/0x13c
[   61.273591]  amba_driver_register+0x60/0x70
[   61.273594]  tmc_driver_init+0x20/0x2c
[   61.281582]  do_one_initcall+0x50/0x230
[   61.281585]  do_initcalls+0x104/0x144
[   61.291831]  kernel_init_freeable+0x168/0x1dc
[   61.291834]  kernel_init+0x1c/0x120
[   61.299215]  ret_from_fork+0x10/0x18
[   61.299219] Code: b9400022 f9400660 9b277c42 8b020000 (f9400404)
[   61.307381] ---[ end trace 63c6c3d7ec6a9b7c ]---
[   61.315225] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fixes: d375b356 ("coresight: Fix support for sparsely populated ports")
Reported-by: NRuediger Oertel <ro@suse.com>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NMian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-4-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

STP_PACKET_MARKED is not supported by STM currently.
Add STM_FLAG_MARKED to support marked packet in STM.
Signed-off-by: NTingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-3-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

etm4_count keeps track of number of ETMv4 registered and on some systems,
a race is observed on etm4_count variable which can lead to multiple calls
to cpuhp_setup_state_nocalls_cpuslocked(). This function internally calls
cpuhp_store_callbacks() which prevents multiple registrations of callbacks
for a given state and due to this race, it returns -EBUSY leading to ETM
probe failures like below.

 coresight-etm4x: probe of 7040000.etm failed with error -16

This race can easily be triggered with async probe by setting probe type
as PROBE_PREFER_ASYNCHRONOUS and with ETM power management property
"arm,coresight-loses-context-with-cpu".

Prevent this race by moving cpuhp callbacks to etm driver init since the
cpuhp callbacks doesn't have to depend on the etm4_count and can be once
setup during driver init. Similarly we move cpu_pm notifier registration
to driver init and completely remove etm4_count usage. Also now we can
use non cpuslocked version of cpuhp callbacks with this movement.

Fixes: 9b6a3f36 ("coresight: etmv4: Fix CPU power management setup in probe() function")
Fixes: 58eb457b ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Suggested-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-2-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

v4:
split power down flow and power saving function to two patch

v5:
fix up modified change under the --- line

Add rts522a L1 sub-state support
Save more power on rts5227 rts5249 rts525a rts5260
Fix rts5260 driving parameter
Signed-off-by: NRicky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200907100731.7722-1-ricky_wu@realtek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>