Explicitly truncate the second operand of do_div() to 32 bits to guard
against bogus code calling it with a 64-bit divisor.

[Thorsten]

After upgrading from 3.2 to 3.10, mounting a btrfs volume fails with:

btrfs: setting nodatacow, compression disabled
btrfs: enabling auto recovery
btrfs: disk space caching is enabled
*** ZERO DIVIDE ***   FORMAT=2
Current process id is 722
BAD KERNEL TRAP: 00000000
Modules linked in: evdev mac_hid ext4 crc16 jbd2 mbcache btrfs xor lzo_compress zlib_deflate raid6_pq crc32c libcrc32c
PC: [<319535b2>] __btrfs_map_block+0x11c/0x119a [btrfs]
SR: 2000  SP: 30c1fab4  a2: 30f0faf0
d0: 00000000    d1: 00001000    d2: 00000000    d3: 00000000
d4: 00010000    d5: 00000000    a0: 3085c72c    a1: 3085c72c
Process mount (pid: 722, task=30f0faf0)
Frame format=2 instr addr=319535ae
Stack from 30c1faec:
        00000000 00000020 00000000 00001000 00000000 01401000 30253928 300ffc00
        00a843ac 3026f640 00000000 00010000 0009e250 00d106c0 00011220 00000000
        00001000 301c6830 0009e32a 000000ff 00000009 3085c72c 00000000 00000000
        30c1fd14 00000000 00000020 00000000 30c1fd14 0009e26c 00000020 00000003
        00000000 0009dd8a 300b0b6c 30253928 00a843ac 00001000 00000000 00000000
        0000a008 3194e76a 30253928 00a843ac 00001000 00000000 00000000 00000002
Call Trace: [<00001000>] kernel_pg_dir+0x0/0x1000

    [...]

Code: 222e ff74 2a2e ff5c 2c2e ff60 4c45 1402 <2d40> ff64 2d41 ff68 2205 4c2e 1800 ff68 4c04 0800 2041 d1c0 2206 4c2e 1400 ff68

[Geert]

As diagnosed by Andreas, fs/btrfs/volumes.c:__btrfs_map_block()
calls

    do_div(stripe_nr, stripe_len);

with stripe_len u64, while do_div() assumes the divisor is a 32-bit number.

Due to the lack of truncation in the m68k-specific implementation of
do_div(), the division is performed using the upper 32-bit word of
stripe_len, which is zero.

This was introduced by commit 53b381b3
("Btrfs: RAID5 and RAID6"), which changed the divisor from
map->stripe_len (struct map_lookup.stripe_len is int) to a 64-bit temporary.
Reported-by: NThorsten Glaser <tg@debian.org>
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Tested-by: NThorsten Glaser <tg@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org

As pointed out by Andreas Schwab, pointers passed to ARAnyM NatFeat calls
should be physical addresses, not virtual addresses.

Fortunately on Atari, physical and virtual kernel addresses are the same,
as long as normal kernel memory is concerned, so this usually worked fine
without conversion.

But for modules, pointers to literal strings are located in vmalloc()ed
memory. Depending on the version of ARAnyM, this causes the nf_get_id()
call to just fail, or worse, crash ARAnyM itself with e.g.

    Gotcha! Illegal memory access. Atari PC = $968c

This is a big issue for distro kernels, who want to have all drivers as
loadable modules in an initrd.

Add a wrapper for nf_get_id() that copies the literal to the stack to
work around this issue.
Reported-by: NThorsten Glaser <tg@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org

Fix build warning of unused variable:

  arch/m68k/mm/init.c: In function 'mem_init': arch/m68k/mm/init.c:151:6: warning: unused variable 'i' [-Wunused-variable]
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepare for killing free_all_bootmem_node() by using free_all_bootmem().
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepare for removing num_physpages and simplify mem_init().
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Concentrate code to modify totalram_pages into the mm core, so the arch
memory initialized code doesn't need to take care of it.  With these
changes applied, only following functions from mm core modify global
variable totalram_pages: free_bootmem_late(), free_all_bootmem(),
free_all_bootmem_node(), adjust_managed_page_count().

With this patch applied, it will be much more easier for us to keep
totalram_pages and zone->managed_pages in consistence.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Address more review comments from last round of code review.
1) Enhance free_reserved_area() to support poisoning freed memory with
   pattern '0'. This could be used to get rid of poison_init_mem()
   on ARM64.
2) A previous patch has disabled memory poison for initmem on s390
   by mistake, so restore to the original behavior.
3) Remove redundant PAGE_ALIGN() when calling free_reserved_area().
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:

  arch/arm/mm/init.c: In function 'mem_init':
  arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
    free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
    ^
  In file included from include/linux/mman.h:4:0,
                   from arch/arm/mm/init.c:15:
  include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
   extern unsigned long free_reserved_area(unsigned long start, unsigned long end,

   mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
   In file included from arch/mips/include/asm/page.h:49:0,
                    from include/linux/mmzone.h:20,
                    from include/linux/gfp.h:4,
                    from include/linux/mm.h:8,
                    from mm/page_alloc.c:18:
   arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
   mm/page_alloc.c: In function 'free_area_init_nodes':
   mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]

Also address some minor code review comments.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Reported-by: NArnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Several drivers need font support independent of CONFIG_VT, cfr. commit
9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font
support code selection logic").
Hence move the fonts and their support logic from drivers/video/console/ to
its own library directory lib/fonts/.
This also allows to limit processing of drivers/video/console/Makefile to
CONFIG_VT=y again.

[Kevin Hilman <khilman@linaro.org>: Update arch/arm/boot/compressed/Makefile]
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Enable the PC parallel port and other related options in the Q40-specific
and multi-platform defconfigs.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

To use the PC parallel port driver on Q40, we need non-standard versions of
the insl/outsl accessors. Make sure to undefine them first, to kill this
compiler warning:

In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:14:1: warning: "insl" redefined
In file included from arch/m68k/include/asm/io.h:4,
                 from include/linux/scatterlist.h:10,
                 from include/linux/dma-mapping.h:9,
                 from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:370:1: warning: this is the location of the previous definition
In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:15:1: warning: "outsl" redefined
In file included from arch/m68k/include/asm/io.h:4,
                 from include/linux/scatterlist.h:10,
                 from include/linux/dma-mapping.h:9,
                 from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:373:1: warning: this is the location of the previous definition
Reported-by: NThorsten Glaser <tg@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

When compiling a MMU kernel with CPU_HAS_ADDRESS_SPACES=n (e.g. "MMU=y
allnoconfig": "echo CONFIG_MMU=y > allno.config && make KCONFIG_ALLCONFIG=1
allnoconfig"), we use plain "move" instead of "moves", and I got:

  CC      arch/m68k/lib/uaccess.o
{standard input}: Assembler messages:
{standard input}:47: Error: operands mismatch -- statement `move.b %a0,(%a1)' ignored

This happens because plain "move" doesn't support byte transfers between
memory and address registers, while "moves" does.

Fix the asm constraints for __generic_copy_from_user(),
__generic_copy_to_user(), and __clear_user() to only use data registers
when accessing userspace.

Also, relax the asm constraints for 16-bit userspace accesses in
__put_user() and __get_user(), as both "move" and "moves" do support
such transfers between memory and address registers.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

To get vectored interrupts working we need to switch from the default
handler handle_bad_irq() to something more sensible. Tested on a MVME177
board.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

'oldmant.m32[1]' is 'unsigned long' which can never be '< 0', and the
original author wanted to check whether the highest bit is set.

So make the bit test explicit (which is better than casting from 'unsigned
long' to 'long').

The related warning: (with EXTRA_CFLAGS=-W ARCH=m68k for allmodconfig)
  arch/m68k/math-emu/fp_arith.c:522:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Allow CONFIG_EARLY_PRINTK without requiring both CONFIG_EMBEDDED and
CONFIG_DEBUG. Default to disabled.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Gcc may replace calls to standard string functions by open code and/or
calls to other standard string functions. If the replacement function is
not available out-of-line, link errors will happen.

To avoid this, the out-of-line versions were provided by
arch/m68k/lib/string.c, but they were usually not linked in anymore as
typically none of its symbols are referenced by built-in code.
However, if any module would need them, they would not be available.

Hence remove the inline strcpy() and strcat() implementations, remove
arch/m68k/lib/string.c, and let the generic string library code handle it.

Impact on a typical kernel build seems minimal or nonexistent:

-      .text : 0x00001000 - 0x002aac74   (2728 KiB)
-      .data : 0x002ada48 - 0x00392148   ( 914 KiB)
+      .text : 0x00001000 - 0x002aacf4   (2728 KiB)
+      .data : 0x002adac8 - 0x00392148   ( 914 KiB)

See also commit e00c73ee ("m68k: Remove
inline strlen() implementation").
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

pci_scan_bus() has called pci_bus_add_devices() already, so remove the
redundant call of pci_bus_add_devices().  subsys_init() callbacks will be
invoked before device_init() callbacks, so it should be safe to remove the
redundant calls.

[bhelgaas: split unicore32 into a separate patch]
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>

The present code does not wait for the SCC to finish resetting itself
before trying to initialise the device. The result is that the SCC
interrupt sources become enabled (if they weren't already). This leads to
an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix
this by adding a delay. A successful reset disables the interrupt sources.

Also, after the reset for channel A setup, the SCC then gets a second
reset for channel B setup which leaves channel A uninitialised again. Fix
this by performing the reset only once.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Cc: stable@vger.kernel.org
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Compiling for targets that use the local gpio code (not GPIOLIB) fail to
compile with:

  CC      arch/m68k/platform/coldfire/device.o
In file included from include/linux/gpio.h:45:0,
                 from arch/m68k/platform/coldfire/device.c:15:
/home/gerg/new-wave.git/linux-3.x/arch/m68k/include/asm/gpio.h:89:19: error: static declaration of ‘gpio_request_one’ follows non-static declaration
include/asm-generic/gpio.h:195:12: note: previous declaration of ‘gpio_request_one’ was here

Fix by conditionally using the local gpio_request_one() function based on
!CONFIG_GPIOLIB.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Linux/M68K currently doesn't support robust futexes or PI mutexes.
The problem is that the futex code needs to perform certain ops
(cmpxchg, set, add, or, andn, xor) atomically on user-space
addresses, and M68K's lack of a futex.h causes those operations
to be unsupported and disabled.

This patch adds that support, but only for uniprocessor machines,
which is adequate for M68K.  For UP it's enough to disable preemption
to ensure mutual exclusion (futexes don't need to care about other
hardware agents), and the mandatory pagefault_disable() does just that.

This patch is closely based on the one I co-wrote for UP ARM back
in August 2008.  The main change is that this patch uses the C
get_user/put_user accessors instead of inline assembly code with
exception table fixups.

For non-MMU machines the new futex.h simply redirects to the generic
futex.h, so there is no functional change for them.

Tested on aranym with the glibc-2.17 test suite: no regressions, and
a number of mutex/condvar test cases went from failing to succeeding
(tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]).
Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI
mutexes: no regressions.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Acked-by: NAndreas Schwab <schwab@linux-m68k.org>
[geert: Added removal of ""generic-y += futex.h"]
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [<ffffffff81c614dc>] dump_stack+0x19/0x1b
  [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8234a071>] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	[s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use common help functions to free reserved pages.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables the initial Timer on coldfire 532x systems.
Without this, the scheduler will not be triggered and the system hangs,
after all sequential code is executed. It should also apply on later kernel
versions.
Signed-off-by: NChristian Gieseler <christiangieseler@yahoo.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The base address of the QSPI hardware module should be 0xFC05C000.
Fix its definition.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add a configuration switch for supporting the Freescale M5373EVB board.
It is based on the newly added ColdFire 537x CPU support.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The ColdFire 537x family is very similar internally to the ColdFire 532x
family. So with just a little extra configuration we can configure and
target them as well.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The M532x CPU platform support can be used on more ColdFire CPU families
than just the 532x types. So rename and reconfigure it to reflect that.
The ColdFire 537x family has virtualy identical internals to the 532x,
and so it will be able to share this code when we add support for them.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The current CONFIG_M532x support definitions are actually common to a larger
set of version 3 ColdFire CPU types. In the future we want to add support for
the 537x family. It is very similar to the 532x internally, and will be able
to use most of the same definitions.

Create a CONFIG_M53xx option that is enabled to support any of the common
532x and 537x CPU types. Convert the current users of CONFIG_M532x to use
CONFIG_M53xx instead.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The contents of the m68k asm/dbg.h are never used, remove the file and
remove the one reference to it.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>

For coldfire with MMU enabled, data cache did not follow the configuration but
was configured in writethrough mode.
Signed-off-by: NStany MARCEL <stany.marcel@novasys-ingenierie.com>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Kconfig symbol ROMVECSIZE is unused since commit
f84f52a5 ("m68knommu: clean up linker
script"). Let's clean up its Kconfig entry too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

All archs are converted over. Remove the config switch and the
fallback code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

GCC can replace a strncat() call with constant second argument into a
strlen + store, which results in a link error:

ERROR: "strlen" [net/ipv4/ip_tunnel.ko] undefined!

The inline function is a simple for loop in C. Other architectures
either use an asm optimized variant, or use the generic function from
lib/string.c.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add platform devices used by the isp116x-hcd driver for EtherNAT and
NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip,
so its platform device is used to cover the EtherNEC case, too.
Register definitions thanks to David Galvez <dgalvez75@gmail.com>

[Geert] Conditionalize isp1160_delay() definition
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add a ndelay macro modeled after the Coldfire udelay(). The ISP1160
driver needs a 150ns delay, so we need to have ndelay().
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add a dedicated interrupt chip definition for the EtherNAT CPLD interrupts.
SMC91C111 and ISP1160 chips have separate interrupts that can be enabled
and disabled in a CPLD register at offset 0x23 from the card base.

Note the CPLD interrupt control register is mapped on demand, whenever any
interrupt enable/disable action is requested. The EtherNAT USB driver still
needs interrupts disabled around reset and start actions.
In particular, we cannot entirely rely on the irq_startup being called
first.

The smc91x and isp116x-hcd drivers will use this feature.
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add platform device for the Atari ROM port ethernet adapter, EtherNEC.
This platform device will be used by the ne.c driver.

[Geert] Conditionalize platform device data structures
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>