Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 27 2月, 2007 6 次提交
  3. 21 2月, 2007 1 次提交
  5. 15 2月, 2007 1 次提交
    • T
      [PATCH] remove many unneeded #includes of sched.h · cd354f1a
      由 Tim Schmielau 提交于 
      After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cd354f1a
  7. 10 2月, 2007 1 次提交
  9. 06 2月, 2007 6 次提交
  11. 24 1月, 2007 2 次提交
  13. 22 11月, 2006 1 次提交
  15. 01 11月, 2006 1 次提交
  17. 05 10月, 2006 1 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      由 David Howells 提交于 
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  19. 26 9月, 2006 2 次提交
  21. 23 9月, 2006 1 次提交
  23. 19 9月, 2006 1 次提交
  25. 14 9月, 2006 2 次提交
  27. 20 8月, 2006 2 次提交
  29. 04 8月, 2006 2 次提交
    • A
      [PATCH] s2io driver bug fixes #2 · 75c30b13
      由 Ananda Raju 提交于 
      	This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. code cleanup to handle gso modification better
	2. Move repeated code in rx path, to a common function
	   s2io_chk_rx_buffers()
	3. Bug fix in MSI interrupt
	4. clear statistics when card is down
	5. Avoid linked list traversing in lro aggregation.
	6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3
	   buffer mode.
	7. ethtool tso get/set functions to set clear NETIF_F_TSO6
	8. Stop LRO aggregation when we receive ECN notification
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      75c30b13
    • A
      [PATCH] s2io driver bug fixes #1 · b41477f3
      由 Ananda Raju 提交于 
      	This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter
	2. UDP_RR test failure, memset txdl after Tx completion
	3. PXE boot may leave adapter in unknown state so do reset in probe.
	4. Add Tx completion code in netpoll
	5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory
	6. Fix bug in ethtool online test
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      b41477f3
  31. 13 7月, 2006 1 次提交
  33. 03 7月, 2006 1 次提交
  35. 01 7月, 2006 2 次提交
    • H
      [IPV6]: Added GSO support for TCPv6 · f83ef8c0
      由 Herbert Xu 提交于 
      This patch adds GSO support for IPv6 and TCPv6.  This is based on a patch
by Ananda Raju <Ananda.Raju@neterion.com>.  His original description is:

	This patch enables TSO over IPv6. Currently Linux network stacks
	restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from
	"dev->features". This patch will remove this restriction.

	This patch will introduce a new flag NETIF_F_TSO6 which will be used
	to check whether device supports TSO over IPv6. If device support TSO
	over IPv6 then we don't clear of NETIF_F_TSO and which will make the
	TCP layer to create TSO packets. Any device supporting TSO over IPv6
	will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO.

	In case when user disables TSO using ethtool, NETIF_F_TSO will get
	cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't
	get TSO packets created by TCP layer.

	SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet.
	SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature.
	UFO is supported over IPv6 also

	The following table shows there is significant improvement in
	throughput with normal frames and CPU usage for both normal and jumbo.

	--------------------------------------------------
	|          |     1500        |      9600         |
	|          ------------------|-------------------|
	|          | thru     CPU    |  thru     CPU     |
	--------------------------------------------------
	| TSO OFF  | 2.00   5.5% id  |  5.66   20.0% id  |
	--------------------------------------------------
	| TSO ON   | 2.63   78.0 id  |  5.67   39.0% id  |
	--------------------------------------------------
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f83ef8c0
    • J
      Remove obsolete #include <linux/config.h> · 6ab3d562
      由 Jörn Engel 提交于 
      Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
      6ab3d562
  37. 23 6月, 2006 1 次提交
    • H
      [NET]: Merge TSO/UFO fields in sk_buff · 7967168c
      由 Herbert Xu 提交于 
      Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7967168c
  39. 20 6月, 2006 1 次提交
  41. 24 5月, 2006 1 次提交
  43. 03 5月, 2006 3 次提交
    • A
      [PATCH] s2io: init/shutdown fixes · 5d3213cc
      由 Ananda Raju 提交于 
      Hi,
	The following patch contains fix related to init and shutdown of adapter
	as per user guide.  The list of changes include

	1. shutdown gracefully.
	2. Need to mask/unmask interrupts in ISR required fro Xframe-E
	3. Tx FIFO should be enabled after WRR calender programming
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      5d3213cc
    • A
      [PATCH] s2io: additional stats · bd1034f0
      由 Ananda Raju 提交于 
      Hi,
	This patch contains additional statistics counters added to s2io driver
	these statistics are very much usefull in debugging the driver.
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      bd1034f0
    • A
      [PATCH] s2io: fixes · c92ca04b
      由 Ananda Raju 提交于 
      Hi,
	This patch contains some of the bug fixes done for S2io driver.
	Following are the brief description of changes

	1. Continuing with initialization if we get minimum required MSI-X vectors
	2. fix for ethtool online link test fails
	3. make wait_for_cmd_complete generic for all command status registers
	4. Print "Device is on PCI-E bus" for Xframe-E card
	5. CX4 requires additional delay after sw_reset, and requires higher value for igp
	6. Fixed panic due to non-TCP and/or LLC/SNAP traffic in case of lro
	7. remove legacy code for old transponder
	8. SPECIAL_REG_WRITE made to use 32-bit writes irrespective of system type
	9. handle link interrupt as per user guide for Xframe II
	10. Wait till all interrupts hndled
Signed-off-by: NAnanda Raju <ananda.raju@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      c92ca04b