- 16 6月, 2010 1 次提交
-
-
由 Tim Gardner 提交于
Use an irq spinlock to hold off the IRQ handler until enough early card init is complete such that the handler can run without faulting. Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 6月, 2010 1 次提交
-
-
由 John W. Linville 提交于
This reverts commit 15920d8a. This patch was discovered to cause some hostap devices to fail to initialized. https://bugzilla.kernel.org/show_bug.cgi?id=16111Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 12月, 2009 1 次提交
-
-
由 Colin Ian King 提交于
BugLink: https://bugs.launchpad.net/ubuntu/+bug/254837 Spurious shared interrupts or early probing interrupts can cause the hostap interrupt handler to oops before the driver has fully configured the IO base port addresses. In some cases the oops can be because the hardware shares an interrupt line, on other cases it is due to a race condition between probing for the hardware and configuring the IO base port. The latter occurs because the probing is required to determin the hardware port address which is only determined when the probe can interrupt the hardware (catch 22). This patch catches this pre-configured condition to avoid the oops. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Acked-by: NTim Gardner <tim.gardner@canonical.com> Acked-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 5月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
Patch fixes issues with dev->dev_addr changing from array to pointer. Hopefully there are no others. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2009 2 次提交
-
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Use pre-existing net_device_stats in network_device struct. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2009 1 次提交
-
-
由 Dan Williams 提交于
So that net/ieee80211.h can be made private to ipw2x00 in a follow-up. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 11月, 2008 2 次提交
-
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
These bits are shared already between ipw2x00 and hostap, and could probably be shared both more cleanly and with other drivers. This commit simply relocates the code to lib80211 and adjusts the drivers appropriately. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 7月, 2008 1 次提交
-
-
由 David S. Miller 提交于
The new address list lock needs to handle the same device layering issues that the _xmit_lock one does. This integrates work done by Patrick McHardy. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2008 1 次提交
-
-
由 David S. Miller 提交于
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2008 2 次提交
-
-
由 David S. Miller 提交于
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 7月, 2008 2 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Rewrite AID calculation in handle_pspoll() to avoid truncating bits. Make hostap_80211_header_parse() static, don't export it. Avoid shadowing variables. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 5月, 2008 1 次提交
-
-
The "registers" entry was incorrectly created in the procfs root instead of the device specific directory. Move "registers" registration immediately after the containing procfs directory is created. Signed-off-by: NMathieu Chouquet-Stringer <mchouque@free.fr> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 1月, 2008 4 次提交
-
-
由 Al Viro 提交于
Just leave hfa384x_info_frame as-is, don't convert in place. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
it's le32, not le16... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jeff Garzik 提交于
* use irq_handler_t where appropriate * no need to use 'irq' function arg, its already stored in a data struct * rename irq handler 'irq' argument to 'dummy', where the function has been analyzed and proven not to use its first argument. * remove always-false "dev_id == NULL" test from irq handlers * remove pointless casts from void* * declance: irq argument is not const * add KERN_xxx printk prefix * fix minor whitespace weirdness Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 11 10月, 2007 5 次提交
-
-
由 Daniel Drake 提交于
As detailed at https://bugs.gentoo.org/159646 hostap with hostapd confuses udev by presenting 2 interfaces with the same MAC address. Also, at the time of detection, the 'type' attribute is 1, identical to other hostap interfaces. The AP interface is supposed to have type ARPHRD_IEEE80211 (801), but this is not set until after registration. Setting it before register_netdev() is called allows us to avoid this confusion. We can do this by propogating the HOSTAP_INTERFACE type through to hostap_setup_dev(). Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This is nicer than the MAC_FMT stuff. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yoann Padioleau 提交于
Replacing accesses to dev->priv to netdev_priv(dev). The replacment is safe when netdev_priv is used to access a private structure that is right next to the net_device structure in memory. Cf http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/de19321bcd94dbb8/0d74a4adcd6177bd This is the case when the net_device structure was allocated with a call to alloc_netdev or one of its derivative. Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: mcgrof@gmail.com Cc: linux-wireless@vger.kernel.org Cc: akpm@linux-foundation.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Matthias Kaehlcke 提交于
The Host AP driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 4月, 2007 1 次提交
-
-
由 Jouni Malinen 提交于
After 13 years of use, it looks like my email address is finally going to disappear. While this is likely to drop the amount of incoming spam greatly ;-), it may also affect more appropriate messages, so let's update my email address in various places. In addition, Host AP mailing list is subscribers-only and linux-wireless can also be used for discussing issues related to this driver which is now shown in MAINTAINERS. Signed-off-by: NJouni Malinen <j@w1.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 4月, 2007 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2006 1 次提交
-
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 12月, 2006 1 次提交
-
-
由 Yan Burman 提交于
Replace kmalloc+memset with kzalloc Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 11月, 2006 1 次提交
-
-
由 David Howells 提交于
Fix up for make allyesconfig. Signed-Off-By: NDavid Howells <dhowells@redhat.com>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 24 8月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
Intersil firmware 1.7.4 (and possibly others) loses the antenna selection settings when the port is reset. Signed-off-by: NDavid Acker <dacker@roinet.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 7月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
On Fri, 2006-06-30 at 15:45 -0700, Miles Lane wrote: > Okay, I rebuilt my kernel with your combo patch applied. > Then, I inserted my US Robotics USR2210 PCMCIA wifi card, > ran "pccardutil eject", popped out the card and then inserted > a Compaq iPaq wifi card. This triggered the following. > > [ INFO: possible circular locking dependency detected ] > ------------------------------------------------------- > syslogd/1886 is trying to acquire lock: > (&dev->queue_lock){-+..}, at: [<c11a50b5>] dev_queue_xmit+0x120/0x24b > > but task is already holding lock: > (&dev->_xmit_lock){-+..}, at: [<c11a5118>] dev_queue_xmit+0x183/0x24b > > which lock already depends on the new lock. ok this appears to be hostap playing games... it has 2 network devices for one piece of hardware and one calls the other via the networking layer; there is thankfully a natural ordering between the two, so just making the slave one a separate type ought to make this work. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 24 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
The Coverity checker (CID: 59) noted that the call to prism2_hw_reset() was dead code. Move prism2_hw_reset() call to a place where it is actually executed. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 1月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 1 次提交
-
-
由 Olaf Hering 提交于
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2005 1 次提交
-
-
由 Jouni Malinen 提交于
Unregister all netdevs before freeing local data. I was unable to trigger any crashes without this change when running busy loops for driver operations when ejecting a Prism2 PC Card. Anyway, should there be a race condition with this, better make it less likely to happen by unregistering the netdevs first. Signed-off-by: NJouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-