- 11 10月, 2008 36 次提交
-
-
由 Florian Fainelli 提交于
This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch removes these two unused functions : rc32434_sync_delay and rc32434_sync_udelay Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
We are no longer using setup_serial_port. So just remove it from the prom code. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch replaces a raw read using volatiles with a readl. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
-
由 Atsushi Nemoto 提交于
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Add kernel options to control bus timeout error. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
-
由 Atsushi Nemoto 提交于
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Patrick Glass 提交于
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: NPatrick Glass <patrickglass@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
-
由 Thomas Bogendoerfer 提交于
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'rcu-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits) rcu: RCU-based detection of stalled CPUs for Classic RCU, fix rcu: RCU-based detection of stalled CPUs for Classic RCU rcu: add rcu_read_lock_sched() / rcu_read_unlock_sched() rcu: fix sparse shadowed variable warning doc/RCU: fix pseudocode in rcuref.txt rcuclassic: fix compiler warning rcu: use irq-safe locks rcuclassic: fix compilation NG rcu: fix locking cleanup fallout rcu: remove redundant ACCESS_ONCE definition from rcupreempt.c rcu: fix classic RCU locking cleanup lockdep problem rcu: trace fix possible mem-leak rcu: just rename call_rcu_bh instead of making it a macro rcu: remove list_for_each_rcu() rcu: fixes to include/linux/rcupreempt.h rcu: classic RCU locking and memory-barrier cleanups rcu: prevent console flood when one CPU sees another AWOL via RCU rcu, debug: detect stalled grace periods, cleanups rcu, debug: detect stalled grace periods rcu classic: new algorithm for callbacks-processing(v2) ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid() selinux: use default proc sid on symlinks file capabilities: uninline cap_safe_nice Update selinux info in MAINTAINERS and Kconfig help text SELinux: add gitignore file for mdp script SELinux: add boundary support and thread context assignment securityfs: do not depend on CONFIG_SECURITY selinux: add support for installing a dummy policy (v2) security: add/fix security kernel-doc selinux: Unify for- and while-loop style selinux: conditional expression type validation was off-by-one smack: limit privilege by label SELinux: Fix a potentially uninitialised variable in SELinux hooks SELinux: trivial, remove unneeded local variable SELinux: Trivial minor fixes that change C null character style make selinux_write_opts() static
-
由 Linus Torvalds 提交于
Merge branch 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits) sched debug: add name to sched_domain sysctl entries sched: sync wakeups vs avg_overlap sched: remove redundant code in cpu_cgroup_create() sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const sched: minor optimizations in wake_affine and select_task_rq_fair sched: maintain only task entities in cfs_rq->tasks list sched: fixup buddy selection sched: more sanity checks on the bandwidth settings sched: add some comments to the bandwidth code sched: fixlet for group load balance sched: rework wakeup preemption CFS scheduler: documentation about scheduling policies sched: clarify ifdef tangle sched: fix list traversal to use _rcu variant sched: turn off WAKEUP_OVERLAP sched: wakeup preempt when small overlap kernel/cpu.c: create a CPU_STARTING cpu_chain notifier kernel/cpu.c: Move the CPU_DYING notifiers sched: fix __load_balance_iterator() for cfq with only one task ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Use RNG interface instead of get_random_bytes crypto: rng - RNG interface and implementation crypto: api - Add fips_enable flag crypto: skcipher - Move IV generators into their own modules crypto: cryptomgr - Test ciphers using ECB crypto: api - Use test infrastructure crypto: cryptomgr - Add test infrastructure crypto: tcrypt - Add alg_test interface crypto: tcrypt - Abort and only log if there is an error crypto: crc32c - Use Intel CRC32 instruction crypto: tcrypt - Avoid using contiguous pages crypto: api - Display larval objects properly crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup crypto: Kconfig - Replace leading spaces with tabs
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits) RDMA/nes: Fix slab corruption IB/mlx4: Set RLKEY bit for kernel QPs RDMA/nes: Correct error_module bit mask RDMA/nes: Fix routed RDMA connections RDMA/nes: Enhanced PFT management scheme RDMA/nes: Handle AE bounds violation RDMA/nes: Limit critical error interrupts RDMA/nes: Stop spurious MAC interrupts RDMA/nes: Correct tso_wqe_length RDMA/nes: Fill in firmware version for ethtool RDMA/nes: Use ethtool timer value RDMA/nes: Correct MAX TSO frags value RDMA/nes: Enable MC/UC after changing MTU RDMA/nes: Free NIC TX buffers when destroying NIC QP RDMA/nes: Fix MDC setting RDMA/nes: Add wqm_quanta module option RDMA/nes: Module parameter permissions RDMA/cxgb3: Set active_mtu in ib_port_attr RDMA/nes: Add support for 4-port 1G HP blade card RDMA/nes: Make mini_cm_connect() static ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: choose better identifiers dlm: remove bkl dlm: fix address compare dlm: fix locking of lockspace list in dlm_scand dlm: detect available userspace daemon dlm: allow multiple lockspace creates
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: detect lost queue dm: publish dm_vcalloc dm: publish dm_table_unplug_all dm: publish dm_get_mapinfo dm: export struct dm_dev dm crypt: avoid unnecessary wait when splitting bio dm crypt: tidy ctx pending dm crypt: fix async inc_pending dm crypt: move dec_pending on error into write_io_submit dm crypt: remove inc_pending from write_io_submit dm crypt: tidy write loop pending dm crypt: tidy crypt alloc dm crypt: tidy inc pending dm exception store: use chunk_t for_areas dm exception store: introduce area_location function dm raid1: kcopyd should stop on error if errors handled dm mpath: remove is_active from struct dm_path dm mpath: use more error codes Fixed up trivial conflict in drivers/md/dm-mpath.c manually.
-
由 Christoph Hellwig 提交于
Currently we disable barriers as soon as we get a buffer in xlog_iodone that has the XBF_ORDERED flag cleared. But this can be the case not only for buffers where the barrier failed, but also the first buffer of a split log write in case of a log wraparound. Due to the disabled barriers we can easily get directory corruption on unclean shutdowns. So instead of using this check add a new buffer flag for failed barrier writes. This is a regression vs 2.6.26 caused by patch to use the right macro to check for the ORDERED flag, as we previously got true returned for every buffer. Thanks to Toei Rei for reporting the bug. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: GFS2: Support for I/O barriers GFS2: Add UUID to GFS2 sb GFS2: high time to take some time over atime GFS2: The war on bloat GFS2: GFS2 will panic if you misspell any mount options GFS2: Direct IO write at end of file error GFS2: Use an IS_ERR test rather than a NULL test GFS2: Fix race relating to glock min-hold time GFS2: Fix & clean up GFS2 rename GFS2: rm on multiple nodes causes panic GFS2: Fix metafs mounts GFS2: Fix debugfs glock file iterator
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits) doc/cdrom: Trvial documentation error, file not present block_dev: fix kernel-doc in new functions block: add some comments around the bio read-write flags block: mark bio_split_pool static block: Find bio sector offset given idx and offset block: gendisk integrity wrapper block: Switch blk_integrity_compare from bdev to gendisk block: Fix double put in blk_integrity_unregister block: Introduce integrity data ownership flag block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1 bio.h: Remove unused conditional code block: remove end_{queued|dequeued}_request() block: change elevator to use __blk_end_request() gdrom: change to use __blk_end_request() memstick: change to use __blk_end_request() virtio_blk: change to use __blk_end_request() blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure block: add lld busy state exporting interface block: Fix blk_start_queueing() to not kick a stopped queue include blktrace_api.h in headers_install ...
-
- 10 10月, 2008 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
This merges phase 1 of the x86 tree, which is a collection of branches: x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump, x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart, x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile, x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and x86/vmalloc and as Ingo says: "these are the easiest, purely independent x86 topics with no conflicts, in one nice Octopus merge". * 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits) x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE x86: mtrr_cleanup: first 1M may be covered in var mtrrs x86: mtrr_cleanup: print out correct type v2 x86: trivial printk fix in efi.c x86, debug: mtrr_cleanup print out var mtrr before change it x86: mtrr_cleanup try gran_size to less than 1M, v3 x86: mtrr_cleanup try gran_size to less than 1M, cleanup x86: change MTRR_SANITIZER to def_bool y x86, debug printouts: IOMMU setup failures should not be KERN_ERR x86: export set_memory_ro and set_memory_rw x86: mtrr_cleanup try gran_size to less than 1M x86: mtrr_cleanup prepare to make gran_size to less 1M x86: mtrr_cleanup safe to get more spare regs now x86_64: be less annoying on boot, v2 x86: mtrr_cleanup hole size should be less than half of chunk_size, v2 x86: add mtrr_cleanup_debug command line x86: mtrr_cleanup optimization, v2 x86: don't need to go to chunksize to 4G x86_64: be less annoying on boot x86, olpc: fix endian bug in openfirmware workaround ...
-
由 Linus Torvalds 提交于
We already did that a long time ago for pnp_system_init, but pnpacpi_init and pnpbios_init remained as subsys_initcalls, and get linked into the kernel before the arch-specific routines that finalize the PCI resources (pci_subsys_init). This means that the PnP routines would either register their resources before the PCI layer could, or would be unable to check whether a PCI resource had already been registered. Both are problematic. I wanted to do this before 2.6.27, but every time we change something like this, something breaks. That said, _every_ single time we trust some firmware (like PnP tables) more than we trust the hardware itself (like PCI probing), the problems have been worse. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs libata-eh: clear UNIT ATTENTION after reset ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list libata: reorder ata_device to remove 8 bytes of padding on 64 bits [libata] pata_bf54x: Add proper PM operation pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC libata: Implement disk shock protection support [libata] Introduce ata_id_has_unload() PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver ata_piix: drop merged SCR access and use slave_link instead libata: implement slave_link libata: misc updates to prepare for slave link libata: reimplement link iterator libata: make SCR access ops per-link
-
由 Alasdair G Kergon 提交于
Detect and report buggy drivers that destroy their request_queue. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Cc: Stefan Raspl <raspl@linux.vnet.ibm.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org>
-