In order to prepare the switch to the standard MMC device tree parser
for mvsdio, adapt all current uses of mvsdio in the dts files to the
standard format.
Signed-off-by: NSimon Baatz <gmbnomis@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch adds the device tree node for si5351 clock generator
and the corresponding oscillator connected to it. It also limits
i2c frequency to 100kHz as there are bus locks reported on higher
frequencies.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

We now cache the MSI-X capability offset in the struct pci_dev, so no
need to find the capability again.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This tracks Alexandre Courbot's mainline GPIO rework
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>

The 'samsung,vbus-gpio' was submitted before pinmux landed for
exynos5250 and uses the old-style gpio specifier.  Fix the two
exynos5250 boards that use it.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.

This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.
Signed-off-by: NInderpal Singh <inderpal.singh@linaro.org>
Tested-by: NChander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
        ‘regulator_enable’, declared with attribute warn_unused_result
        [-Wunused-result]
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Fix db8500_read_soc_id() to read all five soc_id number locations
instead of repeating the second one two times.
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Trivial patch, adding the i2c Cypress trackpad used on Snow.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>

Since commit 657eee7d (media: coda: use genalloc API) the following build
error happens with imx_v4_v5_defconfig:

drivers/built-in.o: In function 'coda_remove':
clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free'
drivers/built-in.o: In function 'coda_probe':
clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool'
clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc'
clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys'
clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool'

Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit bca7a5a0 (ARM: cpu hotplug: remove majority of cache flushing
from platforms) removes include of <asm/cacheflush.h> and hence
discovers a few indirect inclusion and declaration problems as below.

  CC      arch/arm/mach-imx/hotplug.o
In file included from arch/arm/mach-imx/hotplug.c:16:0:
arch/arm/mach-imx/common.h:100:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/common.h:100:29: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
arch/arm/mach-imx/common.h:101:29: warning: ‘struct pt_regs’ declared inside parameter list [enabled by default]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_die’:
arch/arm/mach-imx/hotplug.c:53:2: error: implicit declaration of function ‘cpu_do_idle’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c: In function ‘imx_cpu_kill’:
arch/arm/mach-imx/hotplug.c:58:26: error: ‘jiffies’ undeclared (first use in this function)
arch/arm/mach-imx/hotplug.c:58:26: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-imx/hotplug.c:58:2: error: implicit declaration of function ‘msecs_to_jiffies’ [-Werror=implicit-function-declaration]
arch/arm/mach-imx/hotplug.c:61:3: error: implicit declaration of function ‘time_after’ [-Werror=implicit-function-declaration]

Fix them by adding the needed inclusion and declaration.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

arch/xtensa/platforms/iss/simdisk.c: In function 'proc_read_simdisk':
arch/xtensa/platforms/iss/simdisk.c:220:12: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_write_simdisk':
arch/xtensa/platforms/iss/simdisk.c:241:38: error: 'buffer' undeclared (first use in this function)
arch/xtensa/platforms/iss/simdisk.c:241:38: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit a69755b1 ("xtensa
simdisk: switch to proc_create_data()")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Enforce congruency of userspace shared mappings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Fix the one zillion warnings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This is the meat of the series which prevents any dcache alias creation
by always keeping the U and K mapping of a page congruent.
If a mapping already exists, and other tries to access the page, prev
one is flushed to physical page (wback+inv)

Essentially flush_dcache_page()/copy_user_highpage() create K-mapping
of a page, but try to defer flushing, unless U-mapping exist.
When page is actually mapped to userspace, update_mmu_cache() flushes
the K-mapping (in certain cases this can be optimised out)

Additonally flush_cache_mm(), flush_cache_range(), flush_cache_page()
handle the puring of stale userspace mappings on exit/munmap...

flush_anon_page() handles the existing U-mapping for anon page before
kernel reads it via the GUP path.

Note that while not complete, this is enough to boot a simple
dynamically linked Busybox based rootfs
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This preps the low level dcache flush helpers to take vaddr argument in
addition to the existing paddr to properly flush the VIPT dcache
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

If a board isn't using twl4030, then dtc will complain about the missing
phandle (which is in twl4030.dtsi).  Move the phy declaration to the dts
files.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 6770b211 (ARM: OMAP2+: Export SoC information to userspace)
had some broken return value handling as noted by Russell King:

+       soc_dev = soc_device_register(soc_dev_attr);
+       if (IS_ERR_OR_NULL(soc_dev)) {
+               kfree(soc_dev_attr);
+               return;
+       }
+
+       parent = soc_device_to_device(soc_dev);
+       if (!IS_ERR_OR_NULL(parent))
+               device_create_file(parent, &omap_soc_attr);

This is nonsense.  For the first, IS_ERR() is sufficient.  For the second,
tell me what error checking is required in the return value of this
function:

struct device *soc_device_to_device(struct soc_device *soc_dev)
{
        return &soc_dev->dev;
}

when you've already determined that the passed soc_dev is a valid pointer.
If you read the comments against the prototype:

/**
 * soc_device_to_device - helper function to fetch struct device
 * @soc: Previously registered SoC device container
 */
struct device *soc_device_to_device(struct soc_device *soc);

if "soc" is valid, it means the "previously registered SoC device container"
must have succeeded and that can only happen if the struct device has been
registered.  Ergo, there will always be a valid struct device pointer for
any registered SoC device container.  Therefore, if soc_device_register()
succeeds, then the return value from soc_device_to_device() will always be
valid and no error checking of it is required.

Simples.  The rule as ever applies here: get to know the APIs your using
and don't fumble around in the dark hoping that you'll get this stuff
right.

Fix it as noted by Russell.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add new clockevent driver that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: NRaghu Gandham <Raghu.Gandham@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Various whitespace and #ifdef removals for GIC and R4K clocksources.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.

  * No longer select CSRC_GIC by default for Malta platform.
  * Limit choice for either the GIC or R4K clocksource, not both.
  * Change location in Makefile.
  * Created new 'gic_read_count' function in common 'irq-gic.c' file.
  * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
  * Surround GIC specific code in Malta platform code with #ifdef's.
  * Only initialize the GIC clocksource if it was selected. Original
    code called it unconditionally if a GIC was found.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Move the global variable 'gic_frequency' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Move the global variable 'gic_present' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add logic needed to handle unaligned accesses in MIPS16e mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>

Add logic needed to properly calculate exceptions for delay slots
when in MIPS16e mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add structures for all the MIPS16e instructions. Also add the
enumerations for all the bit fields for opcodes, functions, etc.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strnlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strlen' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'strncpy' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Optimise 'memset' to use microMIPS instructions and/or optimisations
for binary size reduction. When the microMIPS ISA is not being used,
the library function compiles to the original binary code.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

This adds the option to build the Linux kernel using only the
microMIPS ISA. The resulting kernel binary is, at a minimum,
20% smaller than using the MIPS32R2 ISA.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b
and turn off LL/SC when building a pure microMIPS kernel. This is
a temporary fix until the cmpxchg assembly macro functions are
re-written to not use the HI/LO registers in address calculations.

Also add .insn in selected user access functions which would
otherwise produce ISA mode jump incompatibilities. This is also a
temporary fix.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Support vdso in microMIPS mode.
Signed-off-by: NDouglas Leung <Douglas.Leung@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Add logic needed to handle unaligned accesses in microMIPS mode.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>

Add logic needed to properly calculate exceptions for delay slots
when in microMIPS mode.
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>