- 28 8月, 2015 1 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 25 8月, 2015 1 次提交
-
-
由 Sven Eckelmann 提交于
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 07 6月, 2015 3 次提交
-
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Sven Eckelmann 提交于
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Sven Eckelmann 提交于
An unoptimized version of the Jenkins one-at-a-time hash function is used and partially copied all over the code wherever an hashtable is used. Instead the optimized version shared between the whole kernel should be used to reduce code duplication and use better optimized code. Only the DAT code must use the old implementation because it is used as distributed hash function which has to be common for all nodes. Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
- 03 6月, 2015 2 次提交
-
-
由 Markus Pargmann 提交于
Declare the returntype of batadv_compare_eth as bool. The function called inside this helper function (ether_addr_equal_unaligned) also uses bool as return value, so there is no need to return int. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Markus Pargmann 提交于
It is much clearer to see a bool type as return value than 'int' for functions that are supposed to return true or false. Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
- 29 5月, 2015 3 次提交
-
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
-
- 08 1月, 2015 3 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Antonio Quartulli 提交于
Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Martin Hundebøll 提交于
Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 05 8月, 2014 2 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 André Gaul 提交于
This patch removes unnecessary logspam which resulted from superfluous calls to net_ratelimit(). With the supplied patch, net_ratelimit() is called after the loglevel has been checked. Signed-off-by: NAndré Gaul <gaul@web-yard.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 18 5月, 2014 1 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 22 3月, 2014 3 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Linus Lüssing 提交于
With this patch a node may additionally perform the dropping or unicasting behaviour for a link-local IPv4 and link-local-all-nodes IPv6 multicast packet, too. The extra counter and BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag is needed because with a future bridge snooping support integration a node with a bridge on top of its soft interface is not able to reliably detect its multicast listeners for IPv4 link-local and the IPv6 link-local-all-nodes addresses anymore (see RFC4541, section 2.1.2.2 and section 3). Even though this new flag does make "no difference" now, it'll ensure a seamless integration of multicast bridge support without needing to break compatibility later. Also note, that even with multicast bridge support it won't be possible to optimize 224.0.0.x and ff02::1 towards nodes with bridges, they will always receive these ranges. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Linus Lüssing 提交于
With this patch a node which has no bridge interface on top of its soft interface announces its local multicast listeners via the translation table. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 12 1月, 2014 3 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Simon Wunderlich 提交于
For the network wide multi interface optimization it is required to save metrics per outgoing interface in one neighbor. Therefore a new type is introduced to keep interface-specific information. This also requires some changes in access and list management. The compare and equiv_or_better API calls are changed to take the outgoing interface into consideration. Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 09 1月, 2014 3 次提交
-
-
由 Antonio Quartulli 提交于
The AP isolation status may be evaluated in different spots. Create an helper function to avoid code duplication. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Antonio Quartulli 提交于
A client sending packets which mark matches the value configured via sysfs has to be identified as isolated using the TT_CLIENT_ISOLA flag. The match is mask based, meaning that only bits set in the mask are compared with those in the mark value. If the configured mask is equal to 0 no operation is performed. Such flag is then advertised within the classic client announcement mechanism. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
由 Antonio Quartulli 提交于
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
- 10 12月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Use the newly added generic routine ether_addr_equal_unaligned to test if possibly unaligned to u16 Ethernet addresses are equal. This slightly improves comparison time for systems with CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 10月, 2013 2 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Antonio Quartulli 提交于
Each routing protocol has its own metric semantic and therefore is the protocol itself the only component able to compare two metrics to check their "similarity". This new API allows each routing protocol to implement its own logic and make the external code protocol agnostic. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
- 19 10月, 2013 4 次提交
-
-
由 Antonio Quartulli 提交于
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Antonio Quartulli 提交于
To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 Marek Lindner 提交于
Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Simon Wunderlich 提交于
My university will stop email service for alumni in january 2014, please use my new e-mail address instead. Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch>
-
- 12 10月, 2013 2 次提交
-
-
由 Marek Lindner 提交于
The module prints a warning when the MTU on the hard interface is too small to transfer payload traffic without fragmentation. The required MTU is calculated based on the encapsulation header size. If network coding is compild into the module its header size is taken into account as well. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Martin Hundebøll 提交于
Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: NMartin Hundebøll <martin@hundeboll.net> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 10 10月, 2013 2 次提交
-
-
由 Simon Wunderlich 提交于
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Marek Lindner 提交于
The goal is to provide the infrastructure for sending, receiving and parsing information 'containers' while preserving backward compatibility. TVLV (based on the commonly known Type Length Value technique) was chosen as the format for those containers. Even if a node does not know the tvlv type of a certain container it can simply skip the current container and proceed with the next. Past experience has shown features evolve over time, so a 'version' field was added right from the start to allow differentiating between feature variants - hence the name: T(ype) V(ersion) L(ength) V(alue). This patch introduces the basic TVLV infrastructure: * register / unregister tvlv containers to be sent with each OGM (on primary interfaces only) * register / unregister callback handlers to be called upon finding the corresponding tvlv type in a tvlv buffer * unicast tvlv send / receive API calls Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSpyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 04 9月, 2013 1 次提交
-
-
由 Joe Perches 提交于
This function is being removed, rename the reference. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2013 2 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
由 Simon Wunderlich 提交于
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-
- 29 5月, 2013 1 次提交
-
-
由 Simon Wunderlich 提交于
Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
-