This patch is hdmi display support for exynos drm driver.

There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv
and some low level code is already in s5p-tv and even headers for register
define are almost same. but in this patch, we decide not to consider separated
common code with s5p-tv.

Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc.

1. mixer. The piece of hardware responsible for mixing and blending multiple
data inputs before passing it to an output device.  The mixer is capable of
handling up to three image layers. One is the output of VP.  Other two are
images in RGB format.  The blending factor, and layers' priority are controlled
by mixer's registers. The output is passed to HDMI.

2. vp (video processor). It is used for processing of NV12/NV21 data.  An image
stored in RAM is accessed by DMA. The output in YCbCr444 format is send to
mixer.

3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes
pixel data from mixer and transforms it into data frames. The output is send
to HDMIPHY interface.

4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to
HDMI connector. Basically, it contains a PLL that produces source clock for
mixer, vp and hdmi.

5. ddc (display data channel). It is dedicated i2c channel to exchange display
information as edid with display monitor.

With plane support, exynos hdmi driver fully supports two mixer layes and vp
layer. Also vp layer supports multi buffer plane pixel formats having non
contigus memory spaces.

In exynos drm driver, common drm_hdmi driver to interface with drm framework
has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as
sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls
them. mixer controls all overlay layers in both mixer and vp.

Vblank interrupts for hdmi are handled by mixer internally because drm
framework cannot support multiple irq id. And pipe number is used to check
which display device irq happens.

History
v2: this version
 - drm plane feature support to handle overlay layers.
 - multi buffer plane pixel format support for vp layer.
 - vp layer support

RFCv1: original
 - at https://lkml.org/lkml/2011/11/4/164Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>

some platform could be entering to sleep after short time once lcd panel off
but before that vblank could be off by vblank off delay feature. at that time,
vblank doesn't have the pair between vblank_get/put. so this path makes vblank
off delay to have enough.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

These formats(NV12M, NV12MT and YUV420M) have non contiguous  multi
planes, so each plane uses different buffer. The exynos drm should
support multi buffer for them.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Multi buffer plane pixel format has seperated memory spaces for each
plane. For example, NV12M has Y plane and CbCr plane and these are in
non contiguous memory region. Compared with NV12, NV12M's memory shape
is like following.
NV12  : ______(Y)(CbCr)_______
NV12M : __(Y)_ ..... _(CbCr)__
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

this patch adds pm feature for fimd driver.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The fbdev fb and the user fb is created from same function -
exynos_drm_fb_create, but this function creates not only drm framebuffer
but buffer of fbdev. Remove it because it complicates codes and use
exynos_drm_gem_create() than exynos_drm_buf_create() to create buffer of
fbdev, it give better consistency of codes and more clear
implementation.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

exynos_drm_gem_create function created gem object with gem handle but it
can be called externally without gem handle creation through this patch.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Make a fake mmap offset only when it needs.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This cleans codes of exynos gem - indents and order function and so on.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Brown paper bag of danvet.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm:
  drm/i810: don't acces hw regs in lastclose
  drm/i810: cleanup reclaim_buffers
  drm: kill drm_sman
  drm/sis: use drm_mm instead of drm_sman
  drm/via: use drm_mm instead of drm_sman
  drm/sman: kill user_hash_tab
  drm/sis: track user->memblock mapping with idr
  drm/via: track user->memblock mapping with idr
  drm/sman: rip out owner tracking
  drm/sman: kill owner tracking interface functions
  drm/via: track obj->drm_fd relations in the driver
  drm/sis: track obj->drm_fd relations in the driver

i810 uses a userspace provided mmio map using the drm core map
infrastructure. By the time we reach lastclose, this is all gone
and our mmio_map pointer points at freed memory. Depending upon
luck that still works, most often it just oopses.

Aside: drm maps aren't refcounted, so userspace can essentially oops
the kernel any time it wants to. Who cares.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

My dear old i815 always hits the deadlocked on reclaim_buffers
warning. Switch over to the idlelock duct-tape on hope that
works better. I've fired up my i815 and now closing glxgears doesn't
take 5 seconds anymore. \o/
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (102 commits)
  drm/nouveau/ttm: fix crash as a result of a recent ttm change
  drm/nouveau: Fix notifier blocks over the 4GB mark.
  drm/nouveau: Fix pushbufs over the 4GB mark.
  drm/nvc0/pm: initial engine reclocking
  drm/nouveau: move hpd enable/disable to common code
  drm/nv40/disp: implement support for hotplug irq
  drm/nouveau/gpio: reimplement as nouveau_gpio.c, fixing a number of issues
  drm/nouveau: just pass gpio line to pwm_*, not entire gpio struct
  drm/nouveau/hwsq: remove some magic, give proper opcode names
  drm/nv50/pm: introduce hwsq-based memory reclocking
  drm/nv04/disp: handle dual-link spwg panels without needing quirks
  drm/nouveau/dp: remove broken display depth function, use the improved one
  drm/nouveau/mxm: implement ROM shadow method
  drm/nouveau/mxm: implement _DSM shadow method
  drm/nouveau/mxm: implement wmi shadow method
  drm/nouveau/mxm: initial implementation of dcb sanitisation
  drm/nouveau/disp: parse connector info directly in nouveau_connector.c
  drm/nouveau/i2c: handle bit-banging ourselves
  drm/nouveau/i2c: fix debug message
  drm/nouveau/i2c: tidy up bit-bang helpers, also fixing nv50 setsda bug
  ...

"drm/ttm: callback move_notify any time bo placement change v4" failed to
avoid a NULL pointer dereference in nouveau caused by move_notify being
expected to handle that case now.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No longer used.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Smash compile fix from Tormod Volden <debian.tormod@gmail.com> for
CONFIG_FB_SIS on top of this.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To make the transition in a piece-wise and bisectable way possible,
I've hijacked the ->owner_list from drm_sman. While transitioning, the
list_add was done by the driver, while the list_del was still done by
the dying sman code.

Now that we are in full control of ->owner_list, do the list_del
ourselves.

v2: Better explain the list_del trickery as suggested by Chris Wilson.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No longer used.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Massive indirection through a hashtable for a simple key->pointer
look-up actually just adds bloat.

v2: Drop the misleading comment noted by Chris Wilson.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In contrast to kms drivers, sis/via _always_ associated a buffer with
a drm fd. So by the time we reach lastclose, all open drm fds are gone
and with them their associated objects.

So when sis/via call drm_sman_cleanup in their lastclose funcs, that
will free 0 objects.

The owner tracking now serves no purpose at all, hence rip it ou. We
can't kill the corresponding fields in struct drm_memblock_item yet
because we hijack these in the new driver private owner tracking. But
now that drm_sman.c doesn't touch ->owner_list anymore, we need to
kill the list_move hack and properly add the item to the file_priv
list.

Also leave the list_del(&obj->owner_list) in drm_sman_free for the
moment, it will move to the drivers when sman disappears completely.

v2: Remove the redundant INIT_LIST_HEAD as noted by Chris Wilson
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are now unused.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Exactly like the previous patch for sis.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By attach a driver private struct to each open drm fd.

Because we steal the owner_list from drm_sman until things settle,
use list_move instead of list_add.

This requires to export a drm_sman function temporarily before
drm_sman will die for real completely.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

-next reported a messy merge, so I've merged my upstream pull into
my -next tree.

Conflicts:
	drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No idea why I didn't do this initially... NVD9 HPD is now enabled.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

- moves out of nouveau_bios.c and demagics the logical state definitions
- simplifies chipset-specific driver interface
- makes most of gpio irq handling common, will use for nv4x hpd later
- api extended to allow both direct gpio access, and access using the
  logical function states
- api extended to allow for future use of gpio extender chips
- pre-nv50 was handled very badly, the main issue being that all GPIOs
  were being treated as output-only.
- fixes nvd0 so gpio changes actually stick, magic reg needs bashing
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We don't need more than the line id to determine the PWM controller, and
the GPIO interfaces are about to change somewhat.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

More work needs to be done on supporting the different memory types.

v2 (Ben Skeggs):
- fixed up conflicts from not having pausing patch first
- restructured code somewhat to fit with how all the other code works
- fixed bug where incorrect mpll_ctrl could get set sometimes
- removed stuff that's cargo-culted from the binary driver
- merged nv92+ display disable into hwsq
- fixed incorrect opcode 0x5f magic at end of ucode
Signed-off-by: NMartin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Untested, -ENOHW.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>