- 10 10月, 2008 11 次提交
-
-
由 Paul Moore 提交于
It turns out that checking to see if skb->sk is NULL is not a very good indicator of a forwarded packet as some locally generated packets also have skb->sk set to NULL. Fix this by not only checking the skb->sk field but also the IP[6]CB(skb)->flags field for the IP[6]SKB_FORWARDED flag. While we are at it, we are calling selinux_parse_skb() much earlier than we really should resulting in potentially wasted cycles parsing packets for information we might no use; so shuffle the code around a bit to fix this. Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
After some discussions with the Smack folks, well just Casey, I now have a better idea of what Smack wants out of NetLabel in the future so I think it is now safe to do some API "pruning". If another LSM comes along that needs this functionality we can always add it back in, but I don't see any LSMs on the horizon which might make use of these functions. Thanks to Rami Rosen who suggested removing netlbl_cfg_cipsov4_del() back in February 2008. Signed-off-by: NPaul Moore <paul.moore@hp.com> Reviewed-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
We did the right thing in a few cases but there were several areas where we determined a packet's address family based on the socket's address family which is not the right thing to do since we can get IPv4 packets on IPv6 sockets. This patch fixes these problems by either taking the address family directly from the packet. Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
We were doing a lot of extra work in selinux_netlbl_sock_graft() what wasn't necessary so this patch removes that code. It also removes the redundant second argument to selinux_netlbl_sock_setsid() which allows us to simplify a few other functions. Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NJames Morris <jmorris@namei.org>
-
由 Paul Moore 提交于
Fix a few sparse warnings. One dealt with a RCU lock being held on error, another dealt with an improper type caused by a signed/unsigned mixup while the rest appeared to be caused by using rcu_dereference() in a list_for_each_entry_rcu() call. The latter probably isn't a big deal, but I derive a certain pleasure from knowing that the net/netlabel is nice and clean. Thanks to James Morris for pointing out the issues and demonstrating how to run sparse. Signed-off-by: NPaul Moore <paul.moore@hp.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This is debatable, but while we're debating it, let's disallow the combination of splice and an O_APPEND destination. It's not entirely clear what the semantics of O_APPEND should be, and POSIX apparently expects pwrite() to ignore O_APPEND, for example. So we could make up any semantics we want, including the old ones. But Miklos convinced me that we should at least give it some thought, and that accepting writes at arbitrary offsets is wrong at least for IS_APPEND() files (which always have O_APPEND set, even if the reverse isn't true: you can obviously have O_APPEND set on a regular file). So disallow O_APPEND entirely for now. I doubt anybody cares, and this way we have one less gray area to worry about. Reported-and-argued-for-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NJens Axboe <ens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X hwmon: (adt7473) Fix some bogosity in documentation file hwmon: Define sysfs interface for energy consumption register hwmon: (it87) Prevent power-off on Shuttle SN68PT eeepc-laptop: Fix hwmon interface
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] correct broken links and email addresses
-
由 Matt Mackall 提交于
This fixes the previous fix, which was completely wrong on closer inspection. This version has been manually tested with a user-space test harness and generates sane values. A nearly identical patch has been boot-tested. The problem arose from changing how kmalloc/kfree handled alignment padding without updating ksize to match. This brings it in sync. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Németh Márton 提交于
Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 09 10月, 2008 9 次提交
-
-
由 Alistair John Strachan 提交于
Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Tested-by: NDaniel Exner <dex@dragonslave.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Alistair John Strachan 提交于
The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: NAlistair John Strachan <alistair@devzero.co.uk> Tested-by: NDaniel Exner <dex@dragonslave.de> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Corentin Chary 提交于
Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Sibyte: Register PIO PATA device only for Swarm and Litte Sur
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd. net: Fix netdev_run_todo dead-lock tcp: Fix possible double-ack w/ user dma net: only invoke dev->change_rx_flags when device is UP netrom: Fix sock_orphan() use in nr_release ax25: Quick fix for making sure unaccepted sockets get destroyed. Revert "ax25: Fix std timer socket destroy handling." [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle [Bluetooth] Add reset quirk for new Targus and Belkin dongles [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers
-
由 Ralf Baechle 提交于
Symbol name spaghetti which is too complicated to cleanup on this stage of the release cycle breaks the build on BCM1480 platforms. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 10月, 2008 6 次提交
-
-
由 Daniele Lacamera 提交于
Because of rounding, in certain conditions, i.e. when in congestion avoidance state rho is smaller than 1/128 of the current cwnd, TCP Hybla congestion control starves and the cwnd is kept constant forever. This patch forces an increment by one segment after #send_cwnd calls without increments(newreno behavior). Signed-off-by: NDaniele Lacamera <root@danielinux.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Benjamin Thery tracked down a bug that explains many instances of the error unregister_netdevice: waiting for %s to become free. Usage count = %d It turns out that netdev_run_todo can dead-lock with itself if a second instance of it is run in a thread that will then free a reference to the device waited on by the first instance. The problem is really quite silly. We were trying to create parallelism where none was required. As netdev_run_todo always follows a RTNL section, and that todo tasks can only be added with the RTNL held, by definition you should only need to wait for the very ones that you've added and be done with it. There is no need for a second mutex or spinlock. This is exactly what the following patch does. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ali Saidi 提交于
From: Ali Saidi <saidi@engin.umich.edu> When TCP receive copy offload is enabled it's possible that tcp_rcv_established() will cause two acks to be sent for a single packet. In the case that a tcp_dma_early_copy() is successful, copied_early is set to true which causes tcp_cleanup_rbuf() to be called early which can send an ack. Further along in tcp_rcv_established(), __tcp_ack_snd_check() is called and will schedule a delayed ACK. If no packets are processed before the delayed ack timer expires the packet will be acked twice. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN device down that is in promiscous mode: When the VLAN device is set down, the promiscous count on the real device is decremented by one by vlan_dev_stop(). When removing the promiscous flag from the VLAN device afterwards, the promiscous count on the real device is decremented a second time by the vlan_change_rx_flags() callback. The root cause for this is that the ->change_rx_flags() callback is invoked while the device is down. The synchronization is meant to mirror the behaviour of the ->set_rx_mode callbacks, meaning the ->open function is responsible for doing a full sync on open, the ->close() function is responsible for doing full cleanup on ->stop() and ->change_rx_flags() is meant to do incremental changes while the device is UP. Only invoke ->change_rx_flags() while the device is UP to provide the intended behaviour. Tested-by: NJesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
SLOB's ksize calculation was braindamaged and generally harmlessly underreported the allocation size. But for very small buffers, it could in fact overreport them, leading code depending on krealloc to overrun the allocation and trample other data. Signed-off-by: NMatt Mackall <mpm@selenic.com> Tested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 10月, 2008 14 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 135aedc3, as requested by Hans Verkuil. It was a patch for 2.6.28 where the BKL was pushed down from v4l core to the drivers, not for 2.6.27! Requested-by: NHans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-of-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
-
由 Mathieu Desnoyers 提交于
* Theodore Ts'o (tytso@mit.edu) wrote: > > I've been playing with adding some markers into ext4 to see if they > could be useful in solving some problems along with Systemtap. It > appears, though, that as of 2.6.27-rc8, markers defined in code which is > compiled directly into the kernel (i.e., not as modules) don't show up > in Module.markers: > > kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u > kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u > > (Note the lack of any of the kernel_sched_* markers, and the markers I > added for ext4_* and jbd2_* are missing as wel.) > > Systemtap apparently depends on in-kernel trace_mark being recorded in > Module.markers, and apparently it's been claimed that it used to be > there. Is this a bug in systemtap, or in how Module.markers is getting > built? And is there a file that contains the equivalent information > for markers located in non-modules code? I think the problem comes from "markers: fix duplicate modpost entry" (commit d35cb360) Especially : - add_marker(mod, marker, fmt); + if (!mod->skip) + add_marker(mod, marker, fmt); } return; fail: Here is a fix that should take care if this problem. Thanks for the bug report! Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Tested-by: N"Theodore Ts'o" <tytso@mit.edu> CC: Greg KH <greg@kroah.com> CC: David Smith <dsmith@redhat.com> CC: Roland McGrath <roland@redhat.com> CC: Sam Ravnborg <sam@ravnborg.org> CC: Wenji Huang <wenji.huang@oracle.com> CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y [MIPS] Fix CMP Kconfig configuration and mark as broken.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. V4L/DVB (9053): fix buffer overflow in uvc-video V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow V4L/DVB (9037): Fix support for Hauppauge Nova-S SE V4L/DVB (9029): Fix deadlock in demux code V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 V4L/DVB (8963): s2255drv field count fix V4L/DVB (8961): zr36067: Fix RGBR pixel format V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h V4L/DVB (8958): zr36067: Return proper bytes-per-line value V4L/DVB (8957): zr36067: Restore the default pixel format V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. ...
-
由 Haavard Skinnemoen 提交于
The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: NHein_Tibosch <hein_tibosch@yahoo.es> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jarek Poplawski 提交于
While debugging another bug it was found that NetRom socks are sometimes seen unorphaned in sk_free(). This patch moves sock_orphan() in nr_release() to the beginning (like in ax25, or rose). Reported-and-tested-by: NBernard Pidoux f6bvp <f6bvp@free.fr> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Since we reverted 30902dc3 ("ax25: Fix std timer socket destroy handling.") we have to put some kind of fix in to cure the issue whereby unaccepted connections do not get destroyed. The approach used here is from Tihomir Heidelberg - 9a4gl Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 30902dc3. It causes all kinds of problems, based upon a report by Bernard (f6bvp) and analysis by Jarek Poplawski. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wessel 提交于
The softlockup watchdog needs to be touched when resuming the from the kgdb stopped state to avoid the printk that a CPU is stuck if the debugger was active for longer than the softlockup threshold. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jan Kiszka 提交于
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-