Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This is a driver for the EDT "Polytouch" family of touch controllers
based on the FocalTech FT5x06 line of chips.
Signed-off-by: NSimon Budig <simon.budig@kernelconcepts.de>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This is a initial driver for new touchscreen chip mms114 of MELFAS.
It uses I2C interface and supports 10 multi touch.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This is a driver for the key scan interface of the LPC32xx SoC
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add device tree support for omap4 keypad driver and update the
Documentation with omap4 keypad device tree binding information.

Tested on omap4430 sdp.
Signed-off-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This change adds support for old Hanwang Art master II tablet
Signed-off-by: Nweixing <weixing@hanwang.com.cn>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

On some platform it may happen that the input clock to keyboard may
change during suspend, thus impacting its wakeup capability.

There is no means for keyboard driver to know this frequency before
hand. Hence introduce a platform data 'suspended_rate' which indicates
the frequency during suspend at which keyboard operates.

Accordingly reprogram keyboard while going into suspend and restore
original configuration at the time of resume.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

SPEAr keyboard should normally disable clock during suspend and enable it
during resume.

For cases where it is expected to act as a wakeup source the clock can
remain in the same state i.e. kept enabled if it is being used.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

envelope->attack_level is a u16 type.  We're trying to clamp it here
so it's between 0 and 0x7fff.  Unfortunately, the cast to __s16 turns
all the values larger than 0x7fff into negative numbers and min_t()
thinks they are less than 0x7fff.  envelope_level is an int so now
we've got negative values stored there.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Read the Firmware ID and Board Number from a synaptics device at init
and display them in the system log.

Device behavior is very board and firmware dependent.
It may prove useful for users to include this information when providing
bug reports or other feedback.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Current implementation hard coded keyboard frequency configuration
assuming input clock as fixed APB (83 MHz). Generalize the configuration
using clock framework APIs.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Rename bit definition macros to reflect keyboard registers clearly thus
being more readable.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

All SPEAr keyboard registers are 32 bit wide and are word aligned. This
patch aligns all io access to be word size using relaxed version of
readl/writel.
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch is to disable device wakeup while removing keyboard.
Signed-off-by: NVipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Apparently GCC can't figure out that we bail if we fail to query device
and will not try to use 'features':

drivers/input/touchscreen/wacom_i2c.c: In function ‘wacom_i2c_probe’:
drivers/input/touchscreen/wacom_i2c.c:177:20: warning: ‘features.fw_version’
	may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Check error returned by clk_prepare_enable().
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

With the new i.mx clock framework we should pass NULL as the keypad
clock name.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Adapt clock handling to the new i.mx clock framework and fix the following
warning:

input: imx-keypad as /devices/platform/imx-keypad/input/input0
------------[ cut here ]------------
WARNING: at drivers/clk/clk.c:511 __clk_enable+0x98/0xa8()
Modules linked in:
[<c001a680>] (unwind_backtrace+0x0/0xf4) from [<c002452c>] (warn_slowpath_commo)
[<c002452c>] (warn_slowpath_common+0x48/0x60) from [<c0024560>] (warn_slowpath_)
[<c0024560>] (warn_slowpath_null+0x1c/0x24) from [<c02c4ec4>] (__clk_enable+0x9)
[<c02c4ec4>] (__clk_enable+0x98/0xa8) from [<c02c4ef8>] (clk_enable+0x24/0x5c)
[<c02c4ef8>] (clk_enable+0x24/0x5c) from [<c027ac6c>] (imx_keypad_open+0x28/0xc)
[<c027ac6c>] (imx_keypad_open+0x28/0xc8) from [<c0274b14>] (input_open_device+0)
[<c0274b14>] (input_open_device+0x78/0xa8) from [<c01ec884>] (kbd_connect+0x60/)
[<c01ec884>] (kbd_connect+0x60/0x80) from [<c0273b94>] (input_attach_handler+0x)
[<c0273b94>] (input_attach_handler+0x220/0x258) from [<c02755d4>] (input_regist)
[<c02755d4>] (input_register_device+0x31c/0x390) from [<c038da1c>] (imx_keypad_)
[<c038da1c>] (imx_keypad_probe+0x2e4/0x3b8) from [<c020326c>] (platform_drv_pro)
[<c020326c>] (platform_drv_probe+0x18/0x1c) from [<c0201f64>] (driver_probe_dev)
[<c0201f64>] (driver_probe_device+0x84/0x210) from [<c020217c>] (__driver_attac)
[<c020217c>] (__driver_attach+0x8c/0x90) from [<c02008f8>] (bus_for_each_dev+0x)
[<c02008f8>] (bus_for_each_dev+0x68/0x90) from [<c0201064>] (bus_add_driver+0xa)
[<c0201064>] (bus_add_driver+0xa4/0x23c) from [<c020275c>] (driver_register+0x7)
[<c020275c>] (driver_register+0x78/0x12c) from [<c00087c0>] (do_one_initcall+0x)
[<c00087c0>] (do_one_initcall+0x34/0x188) from [<c04b9310>] (kernel_init+0xe4/0)
[<c04b9310>] (kernel_init+0xe4/0x1a8) from [<c0015bd8>] (kernel_thread_exit+0x0)
---[ end trace 1d550e891d03d7ce ]---
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Sebastian Zenker reported that driver swaps x and y samples when the
touchscreen leads are connected in accordance with the datasheet
specification.  Transposed axis can be typically corrected by touch
screen calibration however this bug also negatively influences touch
pressure measurements.

Add an option to correct x and y axis.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Reported-and-tested-by: NSebastian Zenker <sebastian.zenker@gmx.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The USB TrackPoint name string contains a space at the trailing end that
can cause confusion/difficulty when creating udev rules. Example:

 "Synaptics Inc. Composite TouchPad / TrackPoint (Stick) "

This patch removes the trailing space.
Signed-off-by: NBob Ross <pigiron@gmx.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Dmitry: I understand that I am a bit late to the party :) but I do not
agree with this change. Failure to create attributes is not sometihng
that user could cause (at least not easily) and thus would not be a
setup issue but something more severe. I believe we should fail
loading the driver so sysfs attribute breakage will be noticed as soon
as possible, instead of discovering it much much later in the process.

This reverts commit 63990038.
Requested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The acpi_pad driver can get stuck in destroy_power_saving_task()
waiting for kthread_stop() to stop a power_saving thread.  The problem
is that the isolated_cpus_lock mutex is owned when
destroy_power_saving_task() calls kthread_stop(), which waits for a
power_saving thread to end, and the power_saving thread tries to
acquire the isolated_cpus_lock when it calls round_robin_cpu().  This
patch fixes the issue by making round_robin_cpu() use its own mutex.

https://bugzilla.kernel.org/show_bug.cgi?id=42981

Cc: stable@vger.kernel.org
Signed-off-by: NStuart Hayes <Stuart_Hayes@Dell.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This fixes a regression in 3.4-rc1 caused by commit
ea9f8856
(ACPI video: Harden video bus adding.)

Some platforms don't have _DOS control method, but the ACPI
backlight still works.
We should not invoke _DOS for these platforms.

https://bugzilla.kernel.org/show_bug.cgi?id=43168

Cc: Igor Murzov <intergalactic.anonymous@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The normal messages sent after boot or NVRAM update are T6 reports,
containing a status, and the config memory checksum.  Parse them and dump
a useful info message.

This patch tested on an MXT224E.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Each interrupt contains information for all contacts with changing
properties.  Process all of this information at once, and send it all in a
a single input report (ie input events ending in EV_SYN/SYN_REPORT).

This patch was tested using an MXT224E.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Atmel mxt devices can report one finger for each T9 reportid.
Therefore, this range can be used to report the max number of MT-B slots
to userspace instead of assuming a fixed 10.

Note that mxt_initialized() must complete early, since the input_dev
properties now depend on values in the object table.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

This small refactor is in preparation for checking more report types
in the mxt_interrupt message processing loop.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Streamline interrupt processing by caching the T9 reportid range when
first reading the object table.

In the process, refactor reading the object descriptor table.
First, since the object_table entries are now exactly the same layout
in device memory and in the driver, allocate an appropriately sized
array and fetch the entire table directly into it in a single i2c
transaction.  Since a 6 byte table object requires 10 bytes to read,
doing this dramatically reduces overhead.

Note: The cached T9 reportid's are initialized to 0, which is an invalid
reportid.  Thus, the checks in the interrupt handler will always fail for
devices that do not support the T9 object.  Therefore, after doing a
firmware update, the old object table is destroyed and all cached object
values are reset to 0, before reading the new object table, in case
the new firmware does not have the old objects.

This patch tested on an MXT224E.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Object Table is freed in three cases:
  1) When the driver is being removed.
  2) In the error path of mxt_initialize().
  3) Just after a firmware update, when a new object table is
     about to be read.

For cases 2 & 3, the driver is not immediately unloaded, so this patch
refactors these cases to use a common cleanup function.  It also refactors
the mxt_initialize error paths to ensure that this cleanup happens.

Note: mxt_update_fw_store() does not handle errors during mxt_initialize().
A proposed fix for this is in a subsequent patchset.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Update the debug message:
 * print inidividual status bits
 * print the pressure value
 * use '%u' for unsigned quantities
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Instead of carrying around per-finger state in the driver instance, just
report each finger as it arrives to the input layer, and let the input
layer (evdev) hold the event state (which it does anyway).

Note: this driver does not really do MT-B properly. Each input report
(a group of input events followed by a SYN_REPORT) only contains data for
a single contact.  When multiple fingers are present on a device, each is
properly reported in its own MT_SLOT.  However, there is only ever one
MT_SLOT per SYN_REPORT.  This is fixed in a subsequent patch.

This patch was tested with an mXT224E.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Make firmware and hardware version strings available to userspace.
This is useful, for example, to allow a userspace program to implement
a firwmare update policy.

Change-Id: I1eddb4bbf5f3f9ae6947a8528598973ddead18cf
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Print unsigned values as '%u'.
Also, parse and print the firmware version in its canonical format, as
suggested by Nick Dyer.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Reading the whole info block in one i2c transaction speeds up driver
probe significantly, especially on slower i2c busses.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Write each object using a single bulk i2c write transfer.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The i2c bus requires 4 bytes to do a 1-byte write
(1 byte i2c address + 2 byte offset + 1 byte data).

By taking a length with writes, the driver can amortize transaction
overhead by performing larger transactions where appropriate.

This patch just sets up the new API.  Later patches refactor writes
to take advantage of the larger transactions.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The i2c layer can report a variety of errors, including -ENXIO for an i2c
NAK.  Instead of treating them all as -EIO, pass the actual i2c layer
error up to the caller.

However, still report as -EIO the unlikely case that a transaction was
partially completed, and no error message was returned from i2c_*().
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

For objects with multiple instances, dump them all, prepending each with
its "Instance #".

[rydberg@euromail.se: break out mxt_show_instance()]
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Conserve limited (PAGE_SIZE) sysfs output buffer space by only showing
readable objects and not printing the object's index, which is not useful
to userspace.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>