Contains a QCA6174A-5 chipset, with USB BT. Let's support loading
firmware on it.

From usb-devices:
T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3016 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issues with upcoming drivers.
Signed-off-by: NLoic Poulain <loic.poulain@gmail.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

We accidentally return success if the kmemdup() fails.  It results in
a NULL dereference in the caller.

Fixes: 1110a2db ("Bluetooth: btrtl: Add RTL8822BE Bluetooth device")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

If this check fails, we must release some resources as done everywhere
else in this function before returning an error code.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Nokia devices require the setup of its Public Bluetooth Device
Address and for that it is required to depend on vendor specific
commands. For Broadcom based Nokia devices, that is part of btbcm
module and can be selected via BT_BCM config option.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Currently we are calling usb_submit_urb directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak:
unreferenced object 0xffffffc0ce0fa400 (size 256):
...
  backtrace:
    [<ffffffc00034a9a8>] __save_stack_trace+0x48/0x6c
    [<ffffffc00034b088>] create_object+0x138/0x254
    [<ffffffc0009d5504>] kmemleak_alloc+0x58/0x8c
    [<ffffffc000345f78>] __kmalloc+0x1d4/0x2a0
    [<ffffffc0006765bc>] usb_alloc_urb+0x30/0x60
    [<ffffffbffc128598>] alloc_ctrl_urb+0x38/0x120 [btusb]
    [<ffffffbffc129e7c>] btusb_send_frame+0x64/0xf8 [btusb]

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fixed alignment of all block comments.
Found using checkpatch
Signed-off-by: NDerek Robson <robsonde@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Remove unnecessary static on local variable hst.
Such variable is initialized before being used,
on every execution path throughout the function.
The static has no benefit and, removing it reduces
the object file size.

This issue was detected using Coccinelle and the
following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see the difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
   4029    2528     128    6685    1a1d drivers/bluetooth/btwilink.o

after:
   text    data     bss     dec     hex filename
   4007    2472      64    6543    198f drivers/bluetooth/btwilink.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Convert hci_ll to use hci_uart_unregister_device().

This simplifies the _remove() handler as well as fixes a
potential race condition on unload.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabor.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Simplify _remove() path for hci_nokia.c
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabor.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Several drivers have the same (and incorrect) code in their
_remove() handler.

Coalesce this into a shared function.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's been numerous reported instances where BTUSB_QCA_ROME
bluetooth controllers stop functioning upon resume from suspend. These
devices seem to be losing power during suspend. Patch will detect a status
change on resume and perform a reset.
Signed-off-by: NLeif Liddy <leif.linux@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

pm_runtime_disable() is called in the _close() handler.

Since we call the _close() handler on remove, there is no need to
call pm_runtime_disable() a second time.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Only cancel any ongoing work after making sure, that no new work
can be scheduled. This fixes a race condition in the remove handler.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fixed this coding style erro

./drivers/bluetooth/btqca.c:84: ERROR: code indent should use tabs where possible
Signed-off-by: NJoan Jani <igiann@hotmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There is another device

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=105b ProdID=e066 Rev=01.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=342387DAE35E
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Since we have Cls=ff, we can add all of them.
Signed-off-by: NDmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In case of no IRQ resource associated to the bcm_device, requesting
IRQ should return an error in order to not enable low power mgmt.
Signed-off-by: NLoic Poulain <loic.poulain@gmail.com>
Reported-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Signed-off-by: NArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
netvsc: lockdep and related fixes

These fix sparse and lockdep warnings from netvsc driver.
Targeting these at net-next since no actual related failures
have been observed in non-debug kernels.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rndis functions are used when changing device state.
Therefore the references from network device to internal state
are protected by RTNL mutex.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep back pointer in the per-channel data structure to
avoid any possible RCU related issues when napi poll is
called but netvsc_device is in RCU limbo.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netvsc_device structure should be accessed by rcu_dereference
in the send path.  Change arguments to netvsc_send() to make
this easier to do correctly.

Remove no longer needed hv_device_to_netvsc_device.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rndis_filter_device_add function is called both in
probe context and RTNL context,and creates the netvsc_device
inner structure. It is easier to get the RTNL lock annotation
correct if it returns the object directly, rather than implicitly
by updating network device private data.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use device detach/attach to ensure that no packets are handed
to device during state changes. Call rndis_filter_open/close
directly as part of later VF related changes.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the error unwind logic for incorrect number of queues.
If netif_set_real_num_XX_queues failed then rndis_filter_device_add
would have been called twice. Since input arguments are already
ranged checked this is a hypothetical only problem, not possible
in actual code.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a couple places RTNL is held, and the netvsc_device pointer
is acquired without annotation.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If two MTU changes are in less than update interval (2 seconds),
then the netvsc network device may get stuck with no carrier.

The netvsc driver debounces link status events which is fine
for unsolicited updates, but blocks getting the update after
down/up from MTU reinitialization.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Hemminger says:

====================
net: make dev_close void

Noticed while working on other changes. Why is dev_close()
returning int, it should be void.  Should also change
ndo_close to be void, but that requires more work and someone
with more coccinelle foo (smpl) than me.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no useful return value from dev_close. All paths return 0.
Change dev_close and helper functions to void.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to cast away return value of dev_close.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function dev_close in current kernel will never return an
error. Later changes will make it void.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary static on local variables cpu_id_modulus and cpu_id.
Such variables are initialized before being used, on every execution
path throughout the function. The static has no benefit and, removing
it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. Also, there is a significant difference in the bss segment.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  78689   15272   27808  121769   1dba9 drivers/net/ethernet/cavium/liquidio/lio_main.o

after:
   text    data     bss     dec     hex filename
  78667   15128   27680  121475   1da83 drivers/net/ethernet/cavium/liquidio/lio_main.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary static on local variables cpu_id_modulus and cpu_id.
Such variables are initialized before being used, on every execution
path throughout the function. The static has no benefit and, removing
it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. Also, there is a significant difference in the bss segment.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  55656   10680     576   66912   10560 drivers/net/ethernet/cavium/liquidio/lio_vf_main.o

after:
   text    data     bss     dec     hex filename
  55796   10536     448   66780   104dc drivers/net/ethernet/cavium/liquidio/lio_vf_main.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove useless local variable _condition_ and the code related.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary static on local variable fw_dump_ops.
Such variable is initialized before being used, on every
execution path throughout the function. The static has no
benefit and, removing it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  19032    2136      64   21232    52f0 drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o

after:
   text    data     bss     dec     hex filename
  19020    2048       0   21068    524c drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove useless local variable multiport_cnt and the code related.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove useless local variables last_read_point and last_txw_point and
the code related.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary static on local function pointer _writer_.
Such pointer is initialized before being used, on every
execution path throughout the function. The static has no
benefit and, removing it reduces the object file size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
   text    data     bss     dec     hex filename
 113797   19152    1216  134165   20c15 drivers/net/wireless/cisco/airo.o

after:
   text	   data	    bss	    dec	    hex	filename
 113881	  19096	   1152	 134129	  20bf1	drivers/net/wireless/cisco/airo.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dsa_is_port_initialized helper is only used by dsa_switch_resume and
dsa_switch_suspend, if CONFIG_PM_SLEEP is enabled. Make it static to
dsa.c.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the definition of PGV_FROM_VMALLOC from af_packet.c.
The PGV_FROM_VMALLOC definition was already removed by
commit 441c793a ("net: cleanup unused macros in net directory"),
and its usage was removed even before by commit c56b4d90
("af_packet: remove pgv.flags"); but it was added back by mistake later on,
in commit f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation").
Signed-off-by: NRami Rosen <rami.rosen@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>