- 28 11月, 2012 13 次提交
-
-
由 Marcelo Tosatti 提交于
KVM added a global variable to guarantee monotonicity in the guest. One of the reasons for that is that the time between 1. ktime_get_ts(×pec); 2. rdtscll(tsc); Is variable. That is, given a host with stable TSC, suppose that two VCPUs read the same time via ktime_get_ts() above. The time required to execute 2. is not the same on those two instances executing in different VCPUS (cache misses, interrupts...). If the TSC value that is used by the host to interpolate when calculating the monotonic time is the same value used to calculate the tsc_timestamp value stored in the pvclock data structure, and a single <system_timestamp, tsc_timestamp> tuple is visible to all vcpus simultaneously, this problem disappears. See comment on top of pvclock_update_vm_gtod_copy for details. Monotonicity is then guaranteed by synchronicity of the host TSCs and guest TSCs. Set TSC stable pvclock flag in that case, allowing the guest to read clock from userspace. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Register a notifier for clocksource change event. In case the host switches to clock other than TSC, disable master clock usage. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Allow the caller to pass host tsc value to kvm_x86_ops->read_l1_tsc(). Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Improve performance of time system calls when using Linux pvclock, by reading time info from fixmap visible copy of pvclock data. Originally from Jeremy Fitzhardinge. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Hook into generic pvclock vsyscall code, with the aim to allow userspace to have visibility into pvclock data. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Originally from Jeremy Fitzhardinge. Introduce generic, non hypervisor specific, pvclock initialization routines. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
As noted by Gleb, not advertising SSE2 support implies no RDTSC barriers. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Acked-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Originally from Jeremy Fitzhardinge. So code can be reused. Acked-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Originally from Jeremy Fitzhardinge. We can copy the information directly from "struct pvclock_vcpu_time_info", remove pvclock_shadow_time. Reviewed-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Originally from Jeremy Fitzhardinge. pvclock_get_time_values, which contains the memory barriers will be removed by next patch. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
We want to expose the pvclock shared memory areas, which the hypervisor periodically updates, to userspace. For a linear mapping from userspace, it is necessary that entire page sized regions are used for array of pvclock structures. There is no such guarantee with per cpu areas, therefore move to memblock_alloc based allocation. Acked-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise its possible for an unrelated KVM_REQ_UPDATE_CLOCK (such as due to CPU migration) to clear the bit. Noticed by Paolo Bonzini. Reviewed-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 14 11月, 2012 3 次提交
-
-
由 Guo Chao 提交于
No need to check return value before breaking switch. Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Guo Chao 提交于
Return value of this function will be that of ioctl(). #include <stdio.h> #include <linux/kvm.h> int main () { int fd; fd = open ("/dev/kvm", 0); fd = ioctl (fd, KVM_CREATE_VM, 0); ioctl (fd, KVM_SET_TSS_ADDR, 0xfffff000); perror (""); return 0; } Output is "Operation not permitted". That's not what we want. Return -EINVAL in this case. Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Guo Chao 提交于
We should avoid kfree()ing error pointer in kvm_vcpu_ioctl() and kvm_arch_vcpu_ioctl(). Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 31 10月, 2012 1 次提交
-
-
由 Alexander Graf 提交于
The new uapi framework splits kernel internal and user space exported bits of header files more cleanly. Adjust the ePAPR header accordingly. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 30 10月, 2012 12 次提交
-
-
由 Paul Mackerras 提交于
This fixes an error in the inline asm in try_lock_hpte() where we were erroneously using a register number as an immediate operand. The bug only affects an error path, and in fact the code will still work as long as the compiler chooses some register other than r0 for the "bits" variable. Nevertheless it should still be fixed. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
Commit 55b665b0 ("KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas") includes a check on the length of the dispatch trace log (DTL) to make sure the buffer is at least one entry long. This is appropriate when registering a buffer, but the interface also allows for any existing buffer to be unregistered by specifying a zero address. In this case the length check is not appropriate. This makes the check conditional on the address being non-zero. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
Currently the code that accounts stolen time tends to overestimate the stolen time, and will sometimes report more stolen time in a DTL (dispatch trace log) entry than has elapsed since the last DTL entry. This can cause guests to underflow the user or system time measured for some tasks, leading to ridiculous CPU percentages and total runtimes being reported by top and other utilities. In addition, the current code was designed for the previous policy where a vcore would only run when all the vcpus in it were runnable, and so only counted stolen time on a per-vcore basis. Now that a vcore can run while some of the vcpus in it are doing other things in the kernel (e.g. handling a page fault), we need to count the time when a vcpu task is preempted while it is not running as part of a vcore as stolen also. To do this, we bring back the BUSY_IN_HOST vcpu state and extend the vcpu_load/put functions to count preemption time while the vcpu is in that state. Handling the transitions between the RUNNING and BUSY_IN_HOST states requires checking and updating two variables (accumulated time stolen and time last preempted), so we add a new spinlock, vcpu->arch.tbacct_lock. This protects both the per-vcpu stolen/preempt-time variables, and the per-vcore variables while this vcpu is running the vcore. Finally, we now don't count time spent in userspace as stolen time. The task could be executing in userspace on behalf of the vcpu, or it could be preempted, or the vcpu could be genuinely stopped. Since we have no way of dividing up the time between these cases, we don't count any of it as stolen. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
Currently the Book3S HV code implements a policy on multi-threaded processors (i.e. POWER7) that requires all of the active vcpus in a virtual core to be ready to run before we run the virtual core. However, that causes problems on reset, because reset stops all vcpus except vcpu 0, and can also reduce throughput since all four threads in a virtual core have to wait whenever any one of them hits a hypervisor page fault. This relaxes the policy, allowing the virtual core to run as soon as any vcpu in it is runnable. With this, the KVMPPC_VCPU_STOPPED state and the KVMPPC_VCPU_BUSY_IN_HOST state have been combined into a single KVMPPC_VCPU_NOTREADY state, since we no longer need to distinguish between them. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
If a thread in a virtual core becomes runnable while other threads in the same virtual core are already running in the guest, it is possible for the latecomer to join the others on the core without first pulling them all out of the guest. Currently this only happens rarely, when a vcpu is first started. This fixes some bugs and omissions in the code in this case. First, we need to check for VPA updates for the latecomer and make a DTL entry for it. Secondly, if it comes along while the master vcpu is doing a VPA update, we don't need to do anything since the master will pick it up in kvmppc_run_core. To handle this correctly we introduce a new vcore state, VCORE_STARTING. Thirdly, there is a race because we currently clear the hardware thread's hwthread_req before waiting to see it get to nap. A latecomer thread could have its hwthread_req cleared before it gets to test it, and therefore never increment the nap_count, leading to messages about wait_for_nap timeouts. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
There were a few places where we were traversing the list of runnable threads in a virtual core, i.e. vc->runnable_threads, without holding the vcore spinlock. This extends the places where we hold the vcore spinlock to cover everywhere that we traverse that list. Since we possibly need to sleep inside kvmppc_book3s_hv_page_fault, this moves the call of it from kvmppc_handle_exit out to kvmppc_vcpu_run, where we don't hold the vcore lock. In kvmppc_vcore_blocked, we don't actually need to check whether all vcpus are ceded and don't have any pending exceptions, since the caller has already done that. The caller (kvmppc_run_vcpu) wasn't actually checking for pending exceptions, so we add that. The change of if to while in kvmppc_run_vcpu is to make sure that we never call kvmppc_remove_runnable() when the vcore state is RUNNING or EXITING. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
Subsequent patches implementing in-kernel XICS emulation will make it possible for IPIs to arrive at secondary threads at arbitrary times. This fixes some races in how we start the secondary threads, which if not fixed could lead to occasional crashes of the host kernel. This makes sure that (a) we have grabbed all the secondary threads, and verified that they are no longer in the kernel, before we start any thread, (b) that the secondary thread loads its vcpu pointer after clearing the IPI that woke it up (so we don't miss a wakeup), and (c) that the secondary thread clears its vcpu pointer before incrementing the nap count. It also removes unnecessary setting of the vcpu and vcore pointers in the paca in kvmppc_core_vcpu_load. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
When a Book3S HV KVM guest is running, we need the host to be in single-thread mode, that is, all of the cores (or at least all of the cores where the KVM guest could run) to be running only one active hardware thread. This is because of the hardware restriction in POWER processors that all of the hardware threads in the core must be in the same logical partition. Complying with this restriction is much easier if, from the host kernel's point of view, only one hardware thread is active. This adds two hooks in the SMP hotplug code to allow the KVM code to make sure that secondary threads (i.e. hardware threads other than thread 0) cannot come online while any KVM guest exists. The KVM code still has to check that any core where it runs a guest has the secondary threads offline, but having done that check it can now be sure that they will not come online while the guest is running. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The new uapi framework splits kernel internal and user space exported bits of header files more cleanly. Adjust the ePAPR header accordingly. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The mtspr/mfspr emulation code became quite big over time. Move it into its own function so things stay more readable. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When remembering the direction of a DCR transaction, we should write to the same variable that we interpret on later when doing vcpu_run again. Signed-off-by: NAlexander Graf <agraf@suse.de> Cc: stable@vger.kernel.org
-
由 Xiao Guangrong 提交于
This patch filters noslot pfn out from error pfns based on Marcelo comment: noslot pfn is not a error pfn After this patch, - is_noslot_pfn indicates that the gfn is not in slot - is_error_pfn indicates that the gfn is in slot but the error is occurred when translate the gfn to pfn - is_error_noslot_pfn indicates that the pfn either it is error pfns or it is noslot pfn And is_invalid_pfn can be removed, it makes the code more clean Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 27 10月, 2012 5 次提交
-
-
由 Arnd Bergmann 提交于
This reverts commit 92063cee, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Thomas Petazzoni 提交于
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Wei Yongjun 提交于
The variable base_gfn is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Acked-by: NXiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 26 10月, 2012 3 次提交
-
-
由 Marek Szyprowski 提交于
This reverts commit 871ae57a, which is scheduled for v3.8 and accidently got into v3.7-rc series. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 Yinghai Lu 提交于
Commit 844ab6f9 x86, mm: Find_early_table_space based on ranges that are actually being mapped added back some lines back wrongly that has been removed in commit 7b16bbf9 Revert "x86/mm: Fix the size calculation of mapping tables" remove them again. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQW_vuaYQbmagVnxT2DGsYc=9tNeAbdBq53sYkitPOwxSQ@mail.gmail.comAcked-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Olof Johansson 提交于
When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off efi_enabled once setup is done. Beyond setup, it is normally used to determine if runtime services are available and we will have none. This will resolve issues stemming from efivars modprobe panicking on a 32/64-bit setup, as well as some reboot issues on similar setups. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991Reported-by: NMarko Kohtala <marko.kohtala@gmail.com> Reported-by: NMaxim Kammerer <mk@dee.su> Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@kernel.org # 3.4 - 3.6 Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-
- 25 10月, 2012 3 次提交
-
-
由 Pavel Machek 提交于
This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: NPavel Machek <pavel@denx.de> Acked-by: NDinh Nguyen <dinguyen@altera.com> Acked-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Viresh Kumar 提交于
Few empty files (spear1310_misc_regs.h and spear1340_misc_regs.h) are created by commit b31e2372 "SPEAr13xx: Add header files". Don't know how they got added, obviously my fault :) But nobody could even catch them in reviews. Remove them. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Huang Shijie 提交于
The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand. So the gpmi-nand driver could not find the proper clock. This patch fixes this issue. Signed-off-by: NHuang Shijie <b32955@freescale.com> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-