Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 9月, 2016 1 次提交
    • T
      powerpc/pseries: Fix little endian build with CONFIG_KEXEC=n · d81d8258
      由 Thiago Jung Bauermann 提交于 
      On ppc64le, builds with CONFIG_KEXEC=n fail with:

arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’:
arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’
  if (rc && !kdump_in_progress())

This is because pseries/setup.c includes <linux/kexec.h>, but
kdump_in_progress() is defined in <asm/kexec.h>. This is a problem
because the former only includes the latter if CONFIG_KEXEC_CORE=y.

Fix it by including <asm/kexec.h> directly, as is done in powernv/setup.c.

Fixes: d3cbff1b ("powerpc: Put exception configuration in a common place")
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      d81d8258
  3. 21 7月, 2016 5 次提交
  5. 21 6月, 2016 1 次提交
    • G
      powerpc/pci: Delay populating pdn · 8cc7581c
      由 Gavin Shan 提交于 
      The pdn (struct pci_dn) instances are allocated from memblock or
bootmem when creating PCI controller (hoses) in setup_arch(). PCI
hotplug, which will be supported by proceeding patches, releases
PCI device nodes and their corresponding pdn on unplugging event.
The memory chunks for pdn instances allocated from memblock or
bootmem are hard to reused after being released.

This delays creating pdn by pci_devs_phb_init() from setup_arch()
to core_initcall() so that they are allocated from slab. The memory
consumed by pdn can be released to system without problem during
PCI unplugging time. It indicates that pci_dn is unavailable in
setup_arch() and the the fixup on pdn (like AGP's) can't be carried
out that time. We have to do that in pcibios_root_bridge_prepare()
on maple/pasemi/powermac platforms where/when the pdn is available.
pcibios_root_bridge_prepare is called from subsys_initcall() which
is executed after core_initcall() so the code flow does not change.

At the mean while, the EEH device is created when pdn is populated,
meaning pdn and EEH device have same life cycle. In turn, we needn't
call eeh_dev_init() to create EEH device explicitly.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      8cc7581c
  7. 14 6月, 2016 4 次提交
  9. 11 5月, 2016 2 次提交
  11. 01 3月, 2016 1 次提交
  13. 15 10月, 2015 1 次提交
  15. 18 9月, 2015 1 次提交
  17. 16 9月, 2015 1 次提交
    • T
      genirq: Remove irq argument from irq flow handlers · bd0b9ac4
      由 Thomas Gleixner 提交于 
      Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
      bd0b9ac4
  19. 28 8月, 2015 2 次提交
    • G
      powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() · ea0f8acf
      由 Gavin Shan 提交于 
      This applies cleanup on pci_dn_reconfig_notifier(), no functional
changes:

   * Rename variable "pci" to "pdn" to indicate its purpose clearly.
   * The parent node can be released at any time. So it should be
     hold with of_get_parent() before accessing it.
   * The device node doesn't have to have parent node in theory.
     More check on this.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      ea0f8acf
    • G
      powerpc/pseries: Fix corrupted pdn list · 590c7567
      由 Gavin Shan 提交于 
      Commit cca87d30 ("powerpc/pci: Refactor pci_dn") introduced pdn
list for SRIOV VFs. It means the pdn is be put into the child list
of its parent pdn when the pdn is created. When doing PCI hot
unplugging on pSeries, the PCI device node as well as its pdn are
released through procfs entry "powerpc/ofdt". Some one else grabs
the memory chunk of the pdn and update it accordingly. At the same
time, the pdn is still tracked in the child list of parent pdn. It
leads to corrupted child list in the parent pdn.

This fixes above issue by removing the pdn from the child list of
its parent pdn when the device node is detached from the system.
Note the pdn is free'd when the device node is released if the
device node is dynamic one. Otherwise, the device node as well
as the pdn won't be released.

Fixes: cca87d30 ("powerpc/pci: Refactor pci_dn")
Cc: stable@vger.kernel.org # 4.1+
Reported-by: NSantwana Samantray <santwana.samantray@in.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      590c7567
  21. 14 4月, 2015 1 次提交
  23. 11 4月, 2015 2 次提交
  25. 24 3月, 2015 1 次提交
  27. 25 11月, 2014 1 次提交
    • G
      of/reconfig: Always use the same structure for notifiers · f5242e5a
      由 Grant Likely 提交于 
      The OF_RECONFIG notifier callback uses a different structure depending
on whether it is a node change or a property change. This is silly, and
not very safe. Rework the code to use the same data structure regardless
of the type of notifier.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: <linuxppc-dev@lists.ozlabs.org>
      f5242e5a
  29. 10 11月, 2014 1 次提交
  31. 03 11月, 2014 1 次提交
    • A
      powerpc: Convert power off logic to pm_power_off · 9178ba29
      由 Alexander Graf 提交于 
      The generic Linux framework to power off the machine is a function pointer
called pm_power_off. The trick about this pointer is that device drivers can
potentially implement it rather than board files.

Today on powerpc we set pm_power_off to invoke our generic full machine power
off logic which then calls ppc_md.power_off to invoke machine specific power
off.

However, when we want to add a power off GPIO via the "gpio-poweroff" driver,
this card house falls apart. That driver only registers itself if pm_power_off
is NULL to ensure it doesn't override board specific logic. However, since we
always set pm_power_off to the generic power off logic (which will just not
power off the machine if no ppc_md.power_off call is implemented), we can't
implement power off via the generic GPIO power off driver.

To fix this up, let's get rid of the ppc_md.power_off logic and just always use
pm_power_off as was intended. Then individual drivers such as the GPIO power off
driver can implement power off logic via that function pointer.

With this patch set applied and a few patches on top of QEMU that implement a
power off GPIO on the virt e500 machine, I can successfully turn off my virtual
machine after halt.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[mpe: Squash into one patch and update changelog based on cover letter]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
      9178ba29
  33. 25 9月, 2014 1 次提交
  35. 28 7月, 2014 1 次提交
    • M
      powerpc/pseries: Switch pseries drivers to use machine_xxx_initcall() · 8e83e905
      由 Michael Ellerman 提交于 
      A lot of the code in platforms/pseries is using non-machine initcalls.
That means if a kernel built with pseries support runs on another
platform, for example powernv, the initcalls will still run.

Most of these cases are OK, though sometimes only due to luck. Some were
having more effect:

 * hcall_inst_init
  - Checking FW_FEATURE_LPAR which is set on ps3 & celleb.
 * mobility_sysfs_init
  - created sysfs files unconditionally
  - but no effect due to ENOSYS from rtas_ibm_suspend_me()
 * apo_pm_init
  - created sysfs, allows write
  - nothing checks the value written to though
 * alloc_dispatch_log_kmem_cache
  - creating kmem_cache on non-pseries machines
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8e83e905
  37. 27 6月, 2014 1 次提交
    • G
      of: Migrate of_find_node_by_name() users to for_each_node_by_name() · ccdb8ed3
      由 Grant Likely 提交于 
      There are a bunch of users open coding the for_each_node_by_name() by
calling of_find_node_by_name() directly instead of using the macro. This
is getting in the way of some cleanups, and the possibility of removing
of_find_node_by_name() entirely. Clean it up so that all the users are
consistent.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Takashi Iwai <tiwai@suse.de>
      ccdb8ed3
  39. 05 6月, 2014 1 次提交
  41. 01 5月, 2014 1 次提交
  43. 30 4月, 2014 1 次提交
  45. 11 2月, 2014 2 次提交
  47. 30 12月, 2013 1 次提交
  49. 26 11月, 2013 1 次提交
  51. 21 11月, 2013 1 次提交
  53. 11 9月, 2013 1 次提交
  55. 27 8月, 2013 1 次提交
  57. 14 8月, 2013 1 次提交