The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.

This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.

To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.

Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.

Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).

The code will be activated with a follow-up patch.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In preperation to support pass-through adapter interrupts, the Guest
Interruption State Area (GISA) and the Adapter Interruption Virtualization
(AIV) features will be introduced here.

This patch introduces format-0 GISA (that is defines the struct describing
the GISA, allocates storage for it, and introduces fields for the
GISA address in kvm_s390_sie_block and kvm_s390_vsie).

As the GISA requires storage below 2GB, it is put in sie_page2, which is
already allocated in ZONE_DMA. In addition, The GISA requires alignment to
its integral boundary. This is already naturally aligned via the
padding in the sie_page2.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it just like kvm_s390_set_cpuflags().
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Use it in all places where we set cpuflags.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-3-david@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The overall instruction counter is larger than the sum of the
single counters. We should try to catch all instruction handlers
to make this match the summary counter.
Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe....
and remove other unused ones.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

Make the diagnose counters also appear as instruction counters.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>

"wq" is not used at all. "cpuflags" can be access directly via the vcpu,
just as "float_int" via vcpu->kvm.
While at it, reuse _set_cpuflag() to make the code look nicer.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20180108193747.10818-1-david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The cpu model already traces the cpu facilities, the ibc and
guest CPU ids. We should do the same for the cpu features (on
success only).
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

commit a03825bb ("KVM: s390: use kvm->created_vcpus") introduced
kvm->created_vcpus to avoid races with the existing kvm->online_vcpus
scheme. One place was "forgotten" and one new place was "added".
Let's fix those.
Reported-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Fixes: 4e0b1ab7 ("KVM: s390: gs support for kvm guests")
Fixes: a03825bb ("KVM: s390: use kvm->created_vcpus")

Old kernels did not check for zero in the irq_state.flags field and old
QEMUs did not zero the flag/reserved fields when calling
KVM_S390_*_IRQ_STATE.  Let's add comments to prevent future uses of
these fields.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner.  So the extra GPL
text wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".

This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.

Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.
Signed-off-by: NJan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The AIS capability was introduced in 4.12, while the interface to
migrate the state was added in 4.13. Unfortunately it is not possible
for userspace to detect the migration capability without creating a flic
kvm device. As in QEMU the cpu model detection runs on the "none"
machine this will result in cpu model issues regarding the "ais"
capability.

To get the "ais" capability properly let's add a new KVM capability that
tells userspace that AIS states can be migrated.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NHalil Pasic <pasic@linux.vnet.ibm.com>

STHYI requires extensive locking in the higher hypervisors and is
very computational/memory expensive. Therefore we cache the retrieved
hypervisor info whose valid period is 1s with mutex to allow concurrent
access. rw semaphore can't benefit here due to cache line bounce.
Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Update runtime_instr_cb structure to be consistent with the runtime
instrumentation documentation.
Signed-off-by: NAlice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Independent of the underlying hardware, kvm will now always handle
SIGP SET ARCHITECTURE as if czam were enabled. Therefore, let's not
only forward that bit but always set it.

While at it, add a comment regarding STHYI.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170829143108.14703-1-david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The STFLE bit 147 indicates whether the ESSA no-DAT operation code is
valid, the bit is not normally provided to the host; the host is
instead provided with an SCLP bit that indicates whether guests can
support the feature.

This patch:
* enables the STFLE bit in the guest if the corresponding SCLP bit is
  present in the host.
* adds support for migrating the no-DAT bit in the PGSTEs
* fixes the software interpretation of the ESSA instruction that is
  used when migrating, both for the new operation code and for the old
  "set stable", as per specifications.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Allow for the enablement of MEF and the support for the extended
epoch in SIE and VSIE for the extended guest TOD-Clock.

A new interface is used for getting/setting a guest's extended TOD-Clock
that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT.  Since the
host time is a moving target that might see an epoch switch or STP sync
checks we need an atomic ioctl and cannot use the exisiting two
interfaces. The old method of getting and setting the guest TOD-Clock is
still retained and is used when the old ioctls are called.
Signed-off-by: NCollin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This implements kvm_arch_vcpu_in_kernel() for s390.  DIAG is a privileged
operation, so it cannot be called from problem state (user mode).
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).

But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.

This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted.  kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The following warning was triggered by missing srcu locks around
the storage key handling functions.

=============================
WARNING: suspicious RCU usage
4.12.0+ #56 Not tainted
-----------------------------
./include/linux/kvm_host.h:572 suspicious rcu_dereference_check() usage!
rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by live_migration/4936:
  #0:  (&mm->mmap_sem){++++++}, at: [<0000000000141be0>]
kvm_arch_vm_ioctl+0x6b8/0x22d0

 CPU: 8 PID: 4936 Comm: live_migration Not tainted 4.12.0+ #56
 Hardware name: IBM 2964 NC9 704 (LPAR)
 Call Trace:
 ([<000000000011378a>] show_stack+0xea/0xf0)
  [<000000000055cc4c>] dump_stack+0x94/0xd8
  [<000000000012ee70>] gfn_to_memslot+0x1a0/0x1b8
  [<0000000000130b76>] gfn_to_hva+0x2e/0x48
  [<0000000000141c3c>] kvm_arch_vm_ioctl+0x714/0x22d0
  [<000000000013306c>] kvm_vm_ioctl+0x11c/0x7b8
  [<000000000037e2c0>] do_vfs_ioctl+0xa8/0x6c8
  [<000000000037e984>] SyS_ioctl+0xa4/0xb8
  [<00000000008b20a4>] system_call+0xc4/0x27c
 1 lock held by live_migration/4936:
  #0:  (&mm->mmap_sem){++++++}, at: [<0000000000141be0>]
kvm_arch_vm_ioctl+0x6b8/0x22d0
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Pierre Morel<pmorel@linux.vnet.ibm.com>

If the exit flag of SIE indicates that a machine check has happened
during guest's running and needs to be injected, inject it to the guest
accordingly.
But some machine checks, e.g. Channel Report Pending (CRW), refer to
host conditions only (the guest's channel devices are not managed by
the kernel directly) and are therefore not injected into the guest.
External Damage (ED) is also not reinjected into the guest because ETR
conditions are gone in Linux and STP conditions are not enabled in the
guest, and ED contains only these 8 ETR and STP conditions.
In general, instruction-processing damage, system recovery,
storage error, service-processor damage and channel subsystem damage
will be reinjected into the guest, and the remain (System damage,
timing-facility damage, warning, ED and CRW) will be handled on the host.
Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When a machine check happens in the guest, related mcck info (mcic,
external damage code, ...) is stored in the vcpu's lowcore on the host.
Then the machine check handler's low-level part is executed, followed
by the high-level part.

If the high-level part's execution is interrupted by a new machine check
happening on the same vcpu on the host, the mcck info in the lowcore is
overwritten with the new machine check's data.

If the high-level part's execution is scheduled to a different cpu,
the mcck info in the lowcore is uncertain.

Therefore, for both cases, the further reinjection to the guest will use
the wrong data.
Let's backup the mcck info in the lowcore to the sie page
for further reinjection, so that the right data will be used.

Add new member into struct sie_page to store related machine check's
info of mcic, failing storage address and external damage code.
Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

* Add the struct used in the ioctls to get and set CMMA attributes.
* Add the two functions needed to get and set the CMMA attributes for
  guest pages.
* Add the two ioctls that use the aforementioned functions.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

* Add a migration state bitmap to keep track of which pages have dirty
  CMMA information.
* Disable CMMA by default, so we can track if it's used or not. Enable
  it on first use like we do for storage keys (unless we are doing a
  migration).
* Creates a VM attribute to enter and leave migration mode.
* In migration mode, CMMA is disabled in the SIE block, so ESSA is
  always interpreted and emulated in software.
* Free the migration state on VM destroy.
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

A first step in vcpu->requests encapsulation.  Additionally, we now
use READ_ONCE() when accessing vcpu->requests, which ensures we
always load vcpu->requests when it's accessed.  This is important as
other threads can change it any time.  Also, READ_ONCE() documents
that vcpu->requests is used with other threads, likely requiring
memory barriers, which it does.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
[ Documented the new use of READ_ONCE() and converted another check
  in arch/mips/kvm/vz.c ]
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NChristoffer Dall <cdall@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@linaro.org>

If ais is disabled via cpumodel, we must act accordingly, even if
KVM_CAP_S390_AIS was enabled.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: NEric Farman <farman@linux.vnet.ibm.com>

There are many code paths opencoding kvmalloc.  Let's use the helper
instead.  The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator.  E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation.  This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously.  There is no guarantee something like that happens
though.

This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.

Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users were expected to use kvm_check_request() for testing and clearing,
but request have expanded their use since then and some users want to
only test or do a faster clear.

Make sure that requests are not directly accessed with bit operations.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

msa6 and msa7 require no changes.
msa8 adds kma instruction and feature area.
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The PPNO (Perform Pseudorandom Number Operation) instruction
has been renamed to PRNO (Perform Random Number Operation).
To avoid confusion and conflicts with future extensions with
this instruction (like e.g. provide a true random number
generator) this patch renames all occurences in cpacf.h and
adjusts the only exploiter code which is the prng device
driver and one line in the s390 kvm feature check.
Signed-off-by: NHarald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The TASK_SIZE for a process should be maximum possible size of the address
space, 2GB for a 31-bit process and 8PB for a 64-bit process. The number
of page table levels required for a given memory layout is a consequence
of the mapped memory areas and their location.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If the KSS facility is available on the machine, we also make it
available for our KVM guests.

The KSS facility bypasses storage key management as long as the guest
does not issue a related instruction. When that happens, the control is
returned to the host, which has to turn off KSS for a guest vcpu
before retrying the instruction.
Signed-off-by: NCorey S. McQuay <csmcquay@linux.vnet.ibm.com>
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduce a cap to enable AIS facility bit, and add documentation
for this capability.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NFei Li <sherrylf@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Provide an interface for userspace to modify AIS
(adapter-interruption-suppression) mode state, and add documentation
for the interface. Allowed target modes are ALL-Interruptions mode
and SINGLE-Interruption mode.

We introduce the 'simm' and 'nimm' fields in kvm_s390_float_interrupt
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets to one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:

    interruption mode | simm bit | nimm bit
    ------------------|----------|----------
             ALL      |    0     |     0
           SINGLE     |    1     |     0
             NO       |    1     |     1

Besides, add tracepoint to track AIS mode transitions.
Co-Authored-By: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NFei Li <sherrylf@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds guarded storage support for KVM guest. We need to
setup the necessary control blocks, the kvm_run structure for the
new registers, the necessary wrappers for VSIE, as well as the
machine check save areas.
GS is enabled lazily and the register saving and reloading is done in
KVM code.  As this feature adds new content for migration, we provide
a new capability for enablement (KVM_CAP_S390_GS).
Signed-off-by: NFan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Let's replace the bitmasks by defines. Reconstructed from code, comments
and commit messages.

Tried to keep the defines short and map them to feature names. In case
they don't completely map to features, keep them in the stye of ICTL
defines.

This effectively drops all "U" from the existing numbers. I think this
should be fine (as similarly done for e.g. ICTL defines).

I am not 100% sure about the ECA_MVPGI and ECA_PROTEXCI bits as they are
always used in pairs.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20170313104828.13362-1-david@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[some renames, add one missing place]

We handle runtime instrumentation enablement either lazy or via
sync_regs on migration. Make sure to add a debug log entry for that
per CPU on the first occurrence.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>