- 22 7月, 2021 3 次提交
-
-
由 Nicholas Kazlauskas 提交于
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Yang 提交于
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NEric Yang <Eric.Yang2@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Victor Lu 提交于
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NYongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 7月, 2021 7 次提交
-
-
由 Liviu Dudau 提交于
Commit 72a7cf0a ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken image that looks like it has an effective resolution of 1920x1080 but scaled up in an irregular way. Reverting the commit or applying this patch fixes the problem on v5.14-rc1. Fixes: 72a7cf0a ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") Acked-by: NMario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NLiviu Dudau <liviu@dudau.co.uk> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tao Zhou 提交于
Update the version to 0xD for beige_goby. Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NJack Gui <Jack.Gui@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tao Zhou 提交于
Update gc_10_3_4 golden setting. Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NGuchun Chen <guchun.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Likun Gao 提交于
Update GFX golden setting for sienna_cichlid. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Xiaojian Du 提交于
This patch is to update the golden setting for vangogh. Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Optimized the code for codec info structure initialization Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: NJames Zhu <James.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
Added the supported codecs in the video capabilities query. Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: NJames Zhu <James.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 7月, 2021 3 次提交
-
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2021-07-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Two regression fixes targeting stable: - Fix -EDEADLK handling regression (Ville) - Drop the page table optimisation (Matt) Signed-off-by: NDave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YPA8y1DSCp2EbtpC@intel.com
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
Short summary of fixes pull (less than what git shortlog provides): * fbdev: Avoid use-after-free by not deleting current video mode * ttm: Avoid NULL-ptr deref in ttm_range_man_fini() * vmwgfx: Fix a merge commit Signed-off-by: NDave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YO/yoFO+iSEqnIH0@linux-uq9g
-
由 Dave Airlie 提交于
Merge tag 'amd-drm-fixes-5.14-2021-07-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-07-14: amdgpu: - SR-IOV fixes - RAS fixes - eDP fixes - SMU13 code unification to facilitate fixes in the future - Add new renoir DID - Yellow Carp fixes - Beige Goby fixes - Revert a bunch of TLB fixes that caused regressions - Revert an LTTPR display regression amdkfd - Fix VRAM access regression - SVM fixes Signed-off-by: NDave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210714220858.5553-1-alexander.deucher@amd.com
-
- 15 7月, 2021 1 次提交
-
-
由 Jinzhou Su 提交于
Add new PCI device id. Signed-off-by: NJinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
-
- 14 7月, 2021 3 次提交
-
-
由 Zheyu Ma 提交于
When calling ttm_range_man_fini(), 'man' may be uninitialized, which may cause a null pointer dereference bug. Fix this by checking if it is a null pointer. This log reveals it: [ 7.902580 ] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 7.905721 ] RIP: 0010:ttm_range_man_fini+0x40/0x160 [ 7.911826 ] Call Trace: [ 7.911826 ] radeon_ttm_fini+0x167/0x210 [ 7.911826 ] radeon_bo_fini+0x15/0x40 [ 7.913767 ] rs400_fini+0x55/0x80 [ 7.914358 ] radeon_device_fini+0x3c/0x140 [ 7.914358 ] radeon_driver_unload_kms+0x5c/0xe0 [ 7.914358 ] radeon_driver_load_kms+0x13a/0x200 [ 7.914358 ] ? radeon_driver_unload_kms+0xe0/0xe0 [ 7.914358 ] drm_dev_register+0x1db/0x290 [ 7.914358 ] radeon_pci_probe+0x16a/0x230 [ 7.914358 ] local_pci_probe+0x4a/0xb0 Signed-off-by: NZheyu Ma <zheyuma97@gmail.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1626274459-8148-1-git-send-email-zheyuma97@gmail.comSigned-off-by: NChristian König <christian.koenig@amd.com>
-
由 Matthew Auld 提交于
We skip filling out the pt with scratch entries if the va range covers the entire pt, since we later have to fill it with the PTEs for the object pages anyway. However this might leave open a small window where the PTEs don't point to anything valid for the HW to consume. When for example using 2M GTT pages this fill_px() showed up as being quite significant in perf measurements, and ends up being completely wasted since we ignore the pt and just use the pde directly. Anyway, currently we have our PTE construction split between alloc and insert, which is probably slightly iffy nowadays, since the alloc doesn't actually allocate anything anymore, instead it just sets up the page directories and points the PTEs at the scratch page. Later when we do the insert step we re-program the PTEs again. Better might be to squash the alloc and insert into a single step, then bringing back this optimisation(along with some others) should be possible. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.15+ Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com (cherry picked from commit 8f88ca76) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
由 Ville Syrjälä 提交于
The conversion to ww mutexes failed to address the fence code which already returns -EDEADLK when we run out of fences. Ww mutexes on the other hand treat -EDEADLK as an internal errno value indicating a need to restart the operation due to a deadlock. So now when the fence code returns -EDEADLK the higher level code erroneously restarts everything instead of returning the error to userspace as is expected. To remedy this let's switch the fence code to use a different errno value for this. -ENOBUFS seems like a semi-reasonable unique choice. Apart from igt the only user of this I could find is sna, and even there all we do is dump the current fence registers from debugfs into the X server log. So no user visible functionality is affected. If we really cared about preserving this we could of course convert back to -EDEADLK higher up, but doesn't seem like that's worth the hassle here. Not quite sure which commit specifically broke this, but I'll just attribute it to the general gem ww mutex work. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> Testcase: igt/gem_pread/exhaustion Testcase: igt/gem_pwrite/basic-exhaustion Testcase: igt/gem_fenced_exec_thrash/too-many-fences Fixes: 80f0b679 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit 78d2ad7e) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 13 7月, 2021 22 次提交
-
-
由 Aaron Liu 提交于
Remove mdelay process and use smu_cmn_send_smc_msg_with_param to send mode-reset message to SMC. Signed-off-by: NAaron Liu <aaron.liu@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 1098d658. Reason for revert: it causes regressions on several Asics. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 075e8080. Reason for revert: the related commit is reverted. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 31f33243. Reason for revert: it causes regressions on several Asics. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 7a68d188. Reason for revert: the related commit is reverted. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 3be4dca1. Reason for revert: it causes regressions on several Asics. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chengming Gui 提交于
Correct BACO state setting for Beige_Goby Signed-off-by: NChengming Gui <Jack.Gui@amd.com> Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: NGuchun Chen <guchun.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily.Deng 提交于
After FLR, the msix will be cleared, so need to re-enable it. Signed-off-by: NPeng Ju Zhou <PengJu.Zhou@amd.com> Signed-off-by: NEmily.Deng <Emily.Deng@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Felix Kuehling 提交于
The thunk needs to mmap all BOs for CPU access to allow the debugger to access them. Invisible ones are mapped with PROT_NONE. Fixes: 71df0368 ("drm/amdgpu: Implement mmap as GEM object function") Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhan Liu 提交于
[Why] The original logic is to update eDP's backlight level on every amdgpu dm atomic commit, which causes excessive DMUB write. As a result, when playing game or moving window around, DMUB timeout and system lagging are observed. [How] We only need to update eDP's backlight level when current level doesn't match requested level. Signed-off-by: NZhan Liu <zhan.liu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Philip Yang 提交于
prange is NULL if vm fault retry on invalid address, for this case, can not use prange to get pdd, use adev to get gpuidx and then get pdd instead, then increase pdd vm fault counter. Signed-off-by: NPhilip Yang <Philip.Yang@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily Deng 提交于
The irq number should be decided by num_crtc, and the num_crtc could change by parameter. Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Reviewed by: Monk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaomeng Hou 提交于
Update the register header file name. Signed-off-by: NXiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: NAaron Liu <aaron.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaomeng Hou 提交于
Since there's nothing special in smu implementation for yellow carp, it's better to reuse the common smu_v13_0 interfaces and drop the specific smu_v13_0_1.c|h files. v2: remove the duplicate register offset and shift mask header files as well. Signed-off-by: NXiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Reviewed-by: NKevin Wang <kevin1.wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dmytro Laktyushkin 提交于
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Wesley Chalmers 提交于
This reverts commit 2b7605d7 Some displays are not lighting up when put in LTTPR Transparent Mode Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: NJun Lei <Jun.Lei@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Nicholas Kazlauskas 提交于
[Why] We're only treating TMDS as a valid target for infoframe updates which results in PSR being unable to transition from state 4 to state 5. [How] Also allow infoframe updates for DCN3.1 - following how we handle this path for earlier ASIC as well. Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: NEric Yang <eric.yang2@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Luben Tuikov 提交于
In amdgpu_ras_query_error_count() return an error if the device doesn't support RAS. This prevents that function from having to always set the values of the integer pointers (if set), and thus prevents function side effects--always to have to set values of integers if integer pointers set, regardless of whether RAS is supported or not--with this change this side effect is mitigated. Also, if no pointers are set, don't count, since we've no way of reporting the counts. Also, give this function a kernel-doc. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Reported-by: NTom Rix <trix@redhat.com> Fixes: a46751fb ("drm/amdgpu: Fix RAS function interface") Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com> Reviewed-by: NAlexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jingwen Chen 提交于
[Why] If flr_work takes read_lock, then other threads who takes read_lock can access hardware when host is doing vf flr. [How] flr_work should take write_lock to avoid this case. Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhen Lei 提交于
The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178c ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
-
由 Thomas Zimmermann 提交于
Picking up left-over patches in drm-misc-next-fixes.
-
git://anongit.freedesktop.org/drm/drm-misc由 Daniel Vetter 提交于
Short summary of fixes pull: * dma-buf: Fix fence leak in sync_file_merge() error code * drm/panel: nt35510: Don't fail on DSI reads Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YO07pEfweKVO+7y0@linux-uq9g
-
- 12 7月, 2021 1 次提交
-
-
由 Jason Ekstrand 提交于
Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path. Signed-off-by: NJason Ekstrand <jason@jlekstrand.net> Reviewed-by: NChristian König <christian.koenig@amd.com> Fixes: a02b9dc9 ("dma-buf/sync_file: refactor fence storage in struct sync_file") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210624174732.1754546-1-jason@jlekstrand.netSigned-off-by: NChristian König <christian.koenig@amd.com>
-