Skip to content

K
Kernel

openeuler / Kernel
大约 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 1月, 2022 1 次提交
    • E
      net: annotate data-races on txq->xmit_lock_owner · d7764824
      由 Eric Dumazet 提交于 
      stable inclusion
from stable-v5.10.84
commit fa973bf5fd0fda6f0bf9a5d3d403078824dc27ac
bugzilla: 186030 https://gitee.com/openeuler/kernel/issues/I4QV2F

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fa973bf5fd0fda6f0bf9a5d3d403078824dc27ac

--------------------------------

commit 7a10d8c8 upstream.

syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner
without annotations.

No serious issue there, let's document what is happening there.

BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit

write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0:
 __netif_tx_unlock include/linux/netdevice.h:4437 [inline]
 __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229
 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
 macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
 __netdev_start_xmit include/linux/netdevice.h:4987 [inline]
 netdev_start_xmit include/linux/netdevice.h:5001 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3590
 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
 neigh_hh_output include/net/neighbour.h:511 [inline]
 neigh_output include/net/neighbour.h:525 [inline]
 ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:450 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
 expire_timers+0x116/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x410 kernel/time/timer.c:1734
 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20

read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1:
 __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213
 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
 macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
 __netdev_start_xmit include/linux/netdevice.h:4987 [inline]
 netdev_start_xmit include/linux/netdevice.h:5001 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3590
 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523
 neigh_output include/net/neighbour.h:527 [inline]
 ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:450 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
 expire_timers+0x116/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x410 kernel/time/timer.c:1734
 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20
 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443
 folio_test_anon include/linux/page-flags.h:581 [inline]
 PageAnon include/linux/page-flags.h:586 [inline]
 zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347
 zap_pmd_range mm/memory.c:1467 [inline]
 zap_pud_range mm/memory.c:1496 [inline]
 zap_p4d_range mm/memory.c:1517 [inline]
 unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538
 unmap_single_vma+0x157/0x210 mm/memory.c:1583
 unmap_vmas+0xd0/0x180 mm/memory.c:1615
 exit_mmap+0x23d/0x470 mm/mmap.c:3170
 __mmput+0x27/0x1b0 kernel/fork.c:1113
 mmput+0x3d/0x50 kernel/fork.c:1134
 exit_mm+0xdb/0x170 kernel/exit.c:507
 do_exit+0x608/0x17a0 kernel/exit.c:819
 do_group_exit+0xce/0x180 kernel/exit.c:929
 get_signal+0xfc3/0x1550 kernel/signal.c:2852
 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868
 handle_signal_work kernel/entry/common.c:148 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
 exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0xffffffff

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G        W         5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      d7764824
  3. 06 12月, 2021 2 次提交
  5. 15 11月, 2021 2 次提交
  7. 15 10月, 2021 4 次提交
  9. 12 10月, 2021 1 次提交
  11. 17 7月, 2021 1 次提交
  13. 14 7月, 2021 1 次提交
  15. 15 6月, 2021 2 次提交
    • Y
      net: sched: fix tx action reschedule issue with stopped queue · fc1bd7af
      由 Yunsheng Lin 提交于 
      stable inclusion
from stable-5.10.42
commit f9fc21e2b11eb861a903aec8009dc03d9202933a
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit dcad9ee9 ]

The netdev qeueue might be stopped when byte queue limit has
reached or tx hw ring is full, net_tx_action() may still be
rescheduled if STATE_MISSED is set, which consumes unnecessary
cpu without dequeuing and transmiting any skb because the
netdev queue is stopped, see qdisc_run_end().

This patch fixes it by checking the netdev queue state before
calling qdisc_run() and clearing STATE_MISSED if netdev queue is
stopped during qdisc_run(), the net_tx_action() is rescheduled
again when netdev qeueue is restarted, see netif_tx_wake_queue().

As there is time window between netif_xmit_frozen_or_stopped()
checking and STATE_MISSED clearing, between which STATE_MISSED
may set by net_tx_action() scheduled by netif_tx_wake_queue(),
so set the STATE_MISSED again if netdev queue is restarted.

Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking")
Reported-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      fc1bd7af
    • Y
      net: sched: fix tx action rescheduling issue during deactivation · 006771a8
      由 Yunsheng Lin 提交于 
      stable inclusion
from stable-5.10.42
commit 2f23d5bcd9f89c239da83abd6270f5f0d9dd95bc
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 102b55ee ]

Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:

CPU0(net_tx_atcion)  CPU1(__dev_xmit_skb)  CPU2(dev_deactivate)
          .                   .                     .
          .            set STATE_MISSED             .
          .           __netif_schedule()            .
          .                   .           set STATE_DEACTIVATED
          .                   .                qdisc_reset()
          .                   .                     .
          .<---------------   .              synchronize_net()
clear __QDISC_STATE_SCHED  |  .                     .
          .                |  .                     .
          .                |  .            some_qdisc_is_busy()
          .                |  .               return *false*
          .                |  .                     .
  test STATE_DEACTIVATED   |  .                     .
__qdisc_run() *not* called |  .                     .
          .                |  .                     .
   test STATE_MISS         |  .                     .
 __netif_schedule()--------|  .                     .
          .                   .                     .
          .                   .                     .

__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.

qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.

So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().

The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().

After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.

Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking")
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
    avoid the endless rescheduling problem, but there may still
    be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      006771a8
  17. 03 6月, 2021 1 次提交
  19. 26 4月, 2021 1 次提交
  21. 19 4月, 2021 2 次提交
    • M
      can: dev: Move device back to init netns on owning netns delete · b04a8995
      由 Martin Willi 提交于 
      stable inclusion
from stable-5.10.27
commit 8dc08a2962c855f4a88923017445799474ff6446
bugzilla: 51493

--------------------------------

commit 3a5ca857 upstream.

When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.

CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:

  ip netns add foo
  ip link set can0 netns foo
  ip netns delete foo

WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14)
[<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8)
[<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114)
[<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac)
[<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60)
[<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380)
[<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438)
[<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8)
[<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c)
[<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)

To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.

The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.

Fixes: e008b5fc ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.orgSigned-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      b04a8995
    • J
      net: check all name nodes in __dev_alloc_name · a11f1d2a
      由 Jiri Bohac 提交于 
      stable inclusion
from stable-5.10.27
commit 943e1583bf8a5cbcedfc4a00d92d8aac9e7e436d
bugzilla: 51493

--------------------------------

[ Upstream commit 6c015a22 ]

__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.

Since commit ff927412 ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names.  __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.

This demonstrates the bug:

    # rmmod dummy 2>/dev/null
    # ip link property add dev lo altname dummy0
    # modprobe dummy numdummies=1
    modprobe: ERROR: could not insert 'dummy': Too many open files in system

Instead of creating a device named dummy1, modprobe fails.

Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: NJiri Bohac <jbohac@suse.cz>
Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: N  Weilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      a11f1d2a
  23. 09 4月, 2021 1 次提交
    • C
      net: fix dev_ifsioc_locked() race condition · fb49a7bf
      由 Cong Wang 提交于 
      stable inclusion
from stable-5.10.21
commit 1fc205d9e400f069ebf30d3faa6ec2bab2cbd7b4
bugzilla: 50609

--------------------------------

commit 3b23a32a upstream.

dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:

Thread 1			Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
				// dev_ifsioc_locked()
				memcpy(ifr->ifr_hwaddr.sa_data,
					dev->dev_addr,...);

Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.

Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.

Fixes: 3710becf ("net: RCU locking for simple ioctl()")
Reported-by: N"Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
      fb49a7bf
  25. 09 3月, 2021 2 次提交
  27. 08 2月, 2021 1 次提交
  29. 09 12月, 2020 1 次提交
    • T
      xdp: Remove the xdp_attachment_flags_ok() callback · 998f1729
      由 Toke Høiland-Jørgensen 提交于 
      Since commit 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF
programs in net_device"), the XDP program attachment info is now maintained
in the core code. This interacts badly with the xdp_attachment_flags_ok()
check that prevents unloading an XDP program with different load flags than
it was loaded with. In practice, two kinds of failures are seen:

- An XDP program loaded without specifying a mode (and which then ends up
  in driver mode) cannot be unloaded if the program mode is specified on
  unload.

- The dev_xdp_uninstall() hook always calls the driver callback with the
  mode set to the type of the program but an empty flags argument, which
  means the flags_ok() check prevents the program from being removed,
  leading to bpf prog reference leaks.

The original reason this check was added was to avoid ambiguity when
multiple programs were loaded. With the way the checks are done in the core
now, this is quite simple to enforce in the core code, so let's add a check
there and get rid of the xdp_attachment_flags_ok() callback entirely.

Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
      998f1729
  31. 25 11月, 2020 1 次提交
  33. 25 10月, 2020 1 次提交
    • W
      random32: add noise from network and scheduling activity · 3744741a
      由 Willy Tarreau 提交于 
      With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.

This patch restores the spirit of commit f227e3ec ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.

The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.

Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
      3744741a
  35. 19 10月, 2020 1 次提交
    • T
      net: core: use list_del_init() instead of list_del() in netdev_run_todo() · 0e8b8d6a
      由 Taehee Yoo 提交于 
      dev->unlink_list is reused unless dev is deleted.
So, list_del() should not be used.
Due to using list_del(), dev->unlink_list can't be reused so that
dev->nested_level update logic doesn't work.
In order to fix this bug, list_del_init() should be used instead
of list_del().

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond0 master bond1
    ip link set bond0 nomaster
    ip link set bond1 master bond0
    ip link set bond1 nomaster

Splat looks like:
[  255.750458][ T1030] ============================================
[  255.751967][ T1030] WARNING: possible recursive locking detected
[  255.753435][ T1030] 5.9.0-rc8+ #772 Not tainted
[  255.754553][ T1030] --------------------------------------------
[  255.756047][ T1030] ip/1030 is trying to acquire lock:
[  255.757304][ T1030] ffff88811782a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync_multiple+0xc2/0x150
[  255.760056][ T1030]
[  255.760056][ T1030] but task is already holding lock:
[  255.761862][ T1030] ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.764581][ T1030]
[  255.764581][ T1030] other info that might help us debug this:
[  255.766645][ T1030]  Possible unsafe locking scenario:
[  255.766645][ T1030]
[  255.768566][ T1030]        CPU0
[  255.769415][ T1030]        ----
[  255.770259][ T1030]   lock(&dev_addr_list_lock_key/1);
[  255.771629][ T1030]   lock(&dev_addr_list_lock_key/1);
[  255.772994][ T1030]
[  255.772994][ T1030]  *** DEADLOCK ***
[  255.772994][ T1030]
[  255.775091][ T1030]  May be due to missing lock nesting notation
[  255.775091][ T1030]
[  255.777182][ T1030] 2 locks held by ip/1030:
[  255.778299][ T1030]  #0: ffffffffb1f63250 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x2e4/0x8b0
[  255.780600][ T1030]  #1: ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.783411][ T1030]
[  255.783411][ T1030] stack backtrace:
[  255.784874][ T1030] CPU: 7 PID: 1030 Comm: ip Not tainted 5.9.0-rc8+ #772
[  255.786595][ T1030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  255.789030][ T1030] Call Trace:
[  255.789850][ T1030]  dump_stack+0x99/0xd0
[  255.790882][ T1030]  __lock_acquire.cold.71+0x166/0x3cc
[  255.792285][ T1030]  ? register_lock_class+0x1a30/0x1a30
[  255.793619][ T1030]  ? rcu_read_lock_sched_held+0x91/0xc0
[  255.794963][ T1030]  ? rcu_read_lock_bh_held+0xa0/0xa0
[  255.796246][ T1030]  lock_acquire+0x1b8/0x850
[  255.797332][ T1030]  ? dev_mc_sync_multiple+0xc2/0x150
[  255.798624][ T1030]  ? bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.800039][ T1030]  ? check_flags+0x50/0x50
[  255.801143][ T1030]  ? lock_contended+0xd80/0xd80
[  255.802341][ T1030]  _raw_spin_lock_nested+0x2e/0x70
[  255.803592][ T1030]  ? dev_mc_sync_multiple+0xc2/0x150
[  255.804897][ T1030]  dev_mc_sync_multiple+0xc2/0x150
[  255.806168][ T1030]  bond_enslave+0x3d58/0x43e0 [bonding]
[  255.807542][ T1030]  ? __lock_acquire+0xe53/0x51b0
[  255.808824][ T1030]  ? bond_update_slave_arr+0xdc0/0xdc0 [bonding]
[  255.810451][ T1030]  ? check_chain_key+0x236/0x5e0
[  255.811742][ T1030]  ? mutex_is_locked+0x13/0x50
[  255.812910][ T1030]  ? rtnl_is_locked+0x11/0x20
[  255.814061][ T1030]  ? netdev_master_upper_dev_get+0xf/0x120
[  255.815553][ T1030]  do_setlink+0x94c/0x3040
[ ... ]

Reported-by: syzbot+4a0f7bc34e3997a6c7df@syzkaller.appspotmail.com
Fixes: 1fc70edb ("net: core: add nested_level variable in net_device")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201015162606.9377-1-ap420073@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
      0e8b8d6a
  37. 14 10月, 2020 1 次提交
  39. 12 10月, 2020 1 次提交
    • D
      bpf: Add redirect_peer helper · 9aa1206e
      由 Daniel Borkmann 提交于 
      Add an efficient ingress to ingress netns switch that can be used out of tc BPF
programs in order to redirect traffic from host ns ingress into a container
veth device ingress without having to go via CPU backlog queue [0]. For local
containers this can also be utilized and path via CPU backlog queue only needs
to be taken once, not twice. On a high level this borrows from ipvlan which does
similar switch in __netif_receive_skb_core() and then iterates via another_round.
This helps to reduce latency for mentioned use cases.

Pod to remote pod with redirect(), TCP_RR [1]:

  # percpu_netperf 10.217.1.33
          RT_LATENCY:         122.450         (per CPU:         122.666         122.401         122.333         122.401 )
        MEAN_LATENCY:         121.210         (per CPU:         121.100         121.260         121.320         121.160 )
      STDDEV_LATENCY:         120.040         (per CPU:         119.420         119.910         125.460         115.370 )
         MIN_LATENCY:          46.500         (per CPU:          47.000          47.000          47.000          45.000 )
         P50_LATENCY:         118.500         (per CPU:         118.000         119.000         118.000         119.000 )
         P90_LATENCY:         127.500         (per CPU:         127.000         128.000         127.000         128.000 )
         P99_LATENCY:         130.750         (per CPU:         131.000         131.000         129.000         132.000 )

    TRANSACTION_RATE:       32666.400         (per CPU:        8152.200        8169.842        8174.439        8169.897 )

Pod to remote pod with redirect_peer(), TCP_RR:

  # percpu_netperf 10.217.1.33
          RT_LATENCY:          44.449         (per CPU:          43.767          43.127          45.279          45.622 )
        MEAN_LATENCY:          45.065         (per CPU:          44.030          45.530          45.190          45.510 )
      STDDEV_LATENCY:          84.823         (per CPU:          66.770          97.290          84.380          90.850 )
         MIN_LATENCY:          33.500         (per CPU:          33.000          33.000          34.000          34.000 )
         P50_LATENCY:          43.250         (per CPU:          43.000          43.000          43.000          44.000 )
         P90_LATENCY:          46.750         (per CPU:          46.000          47.000          47.000          47.000 )
         P99_LATENCY:          52.750         (per CPU:          51.000          54.000          53.000          53.000 )

    TRANSACTION_RATE:       90039.500         (per CPU:       22848.186       23187.089       22085.077       21919.130 )

  [0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf
  [1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperfSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
      9aa1206e
  41. 30 9月, 2020 1 次提交
    • S
      net: Add netif_rx_any_context() · c11171a4
      由 Sebastian Andrzej Siewior 提交于 
      Quite some drivers make conditional decisions based on in_interrupt() to
invoke either netif_rx() or netif_rx_ni().

Conditionals based on in_interrupt() or other variants of preempt count
checks in drivers should not exist for various reasons and Linus clearly
requested to either split the code pathes or pass an argument to the
common functions which provides the context.

This is obviously the correct solution, but for some of the affected
drivers this needs a major rewrite due to their convoluted structure.

As in_interrupt() usage in drivers needs to be phased out, provide
netif_rx_any_context() as a stop gap for these drivers.

This confines the in_interrupt() conditional to core code which in turn
allows to remove the access to this check for driver code and provides one
central place to do further modifications once the driver maze is cleaned
up.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c11171a4
  43. 29 9月, 2020 3 次提交
    • T
      net: core: add nested_level variable in net_device · 1fc70edb
      由 Taehee Yoo 提交于 
      This patch is to add a new variable 'nested_level' into the net_device
structure.
This variable will be used as a parameter of spin_lock_nested() of
dev->addr_list_lock.

netif_addr_lock() can be called recursively so spin_lock_nested() is
used instead of spin_lock() and dev->lower_level is used as a parameter
of spin_lock_nested().
But, dev->lower_level value can be updated while it is being used.
So, lockdep would warn a possible deadlock scenario.

When a stacked interface is deleted, netif_{uc | mc}_sync() is
called recursively.
So, spin_lock_nested() is called recursively too.
At this moment, the dev->lower_level variable is used as a parameter of it.
dev->lower_level value is updated when interfaces are being unlinked/linked
immediately.
Thus, After unlinking, dev->lower_level shouldn't be a parameter of
spin_lock_nested().

    A (macvlan)
    |
    B (vlan)
    |
    C (bridge)
    |
    D (macvlan)
    |
    E (vlan)
    |
    F (bridge)

    A->lower_level : 6
    B->lower_level : 5
    C->lower_level : 4
    D->lower_level : 3
    E->lower_level : 2
    F->lower_level : 1

When an interface 'A' is removed, it releases resources.
At this moment, netif_addr_lock() would be called.
Then, netdev_upper_dev_unlink() is called recursively.
Then dev->lower_level is updated.
There is no problem.

But, when the bridge module is removed, 'C' and 'F' interfaces
are removed at once.
If 'F' is removed first, a lower_level value is like below.
    A->lower_level : 5
    B->lower_level : 4
    C->lower_level : 3
    D->lower_level : 2
    E->lower_level : 1
    F->lower_level : 1

Then, 'C' is removed. at this moment, netif_addr_lock() is called
recursively.
The ordering is like this.
C(3)->D(2)->E(1)->F(1)
At this moment, the lower_level value of 'E' and 'F' are the same.
So, lockdep warns a possible deadlock scenario.

In order to avoid this problem, a new variable 'nested_level' is added.
This value is the same as dev->lower_level - 1.
But this value is updated in rtnl_unlock().
So, this variable can be used as a parameter of spin_lock_nested() safely
in the rtnl context.

Test commands:
   ip link add br0 type bridge vlan_filtering 1
   ip link add vlan1 link br0 type vlan id 10
   ip link add macvlan2 link vlan1 type macvlan
   ip link add br3 type bridge vlan_filtering 1
   ip link set macvlan2 master br3
   ip link add vlan4 link br3 type vlan id 10
   ip link add macvlan5 link vlan4 type macvlan
   ip link add br6 type bridge vlan_filtering 1
   ip link set macvlan5 master br6
   ip link add vlan7 link br6 type vlan id 10
   ip link add macvlan8 link vlan7 type macvlan

   ip link set br0 up
   ip link set vlan1 up
   ip link set macvlan2 up
   ip link set br3 up
   ip link set vlan4 up
   ip link set macvlan5 up
   ip link set br6 up
   ip link set vlan7 up
   ip link set macvlan8 up
   modprobe -rv bridge

Splat looks like:
[   36.057436][  T744] WARNING: possible recursive locking detected
[   36.058848][  T744] 5.9.0-rc6+ #728 Not tainted
[   36.059959][  T744] --------------------------------------------
[   36.061391][  T744] ip/744 is trying to acquire lock:
[   36.062590][  T744] ffff8c4767509280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_set_rx_mode+0x19/0x30
[   36.064922][  T744]
[   36.064922][  T744] but task is already holding lock:
[   36.066626][  T744] ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[   36.068851][  T744]
[   36.068851][  T744] other info that might help us debug this:
[   36.070731][  T744]  Possible unsafe locking scenario:
[   36.070731][  T744]
[   36.072497][  T744]        CPU0
[   36.073238][  T744]        ----
[   36.074007][  T744]   lock(&vlan_netdev_addr_lock_key);
[   36.075290][  T744]   lock(&vlan_netdev_addr_lock_key);
[   36.076590][  T744]
[   36.076590][  T744]  *** DEADLOCK ***
[   36.076590][  T744]
[   36.078515][  T744]  May be due to missing lock nesting notation
[   36.078515][  T744]
[   36.080491][  T744] 3 locks held by ip/744:
[   36.081471][  T744]  #0: ffffffff98571df0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x236/0x490
[   36.083614][  T744]  #1: ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[   36.085942][  T744]  #2: ffff8c476c8da280 (&bridge_netdev_addr_lock_key/4){+...}-{2:2}, at: dev_uc_sync+0x39/0x80
[   36.088400][  T744]
[   36.088400][  T744] stack backtrace:
[   36.089772][  T744] CPU: 6 PID: 744 Comm: ip Not tainted 5.9.0-rc6+ #728
[   36.091364][  T744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   36.093630][  T744] Call Trace:
[   36.094416][  T744]  dump_stack+0x77/0x9b
[   36.095385][  T744]  __lock_acquire+0xbc3/0x1f40
[   36.096522][  T744]  lock_acquire+0xb4/0x3b0
[   36.097540][  T744]  ? dev_set_rx_mode+0x19/0x30
[   36.098657][  T744]  ? rtmsg_ifinfo+0x1f/0x30
[   36.099711][  T744]  ? __dev_notify_flags+0xa5/0xf0
[   36.100874][  T744]  ? rtnl_is_locked+0x11/0x20
[   36.101967][  T744]  ? __dev_set_promiscuity+0x7b/0x1a0
[   36.103230][  T744]  _raw_spin_lock_bh+0x38/0x70
[   36.104348][  T744]  ? dev_set_rx_mode+0x19/0x30
[   36.105461][  T744]  dev_set_rx_mode+0x19/0x30
[   36.106532][  T744]  dev_set_promiscuity+0x36/0x50
[   36.107692][  T744]  __dev_set_promiscuity+0x123/0x1a0
[   36.108929][  T744]  dev_set_promiscuity+0x1e/0x50
[   36.110093][  T744]  br_port_set_promisc+0x1f/0x40 [bridge]
[   36.111415][  T744]  br_manage_promisc+0x8b/0xe0 [bridge]
[   36.112728][  T744]  __dev_set_promiscuity+0x123/0x1a0
[   36.113967][  T744]  ? __hw_addr_sync_one+0x23/0x50
[   36.115135][  T744]  __dev_set_rx_mode+0x68/0x90
[   36.116249][  T744]  dev_uc_sync+0x70/0x80
[   36.117244][  T744]  dev_uc_add+0x50/0x60
[   36.118223][  T744]  macvlan_open+0x18e/0x1f0 [macvlan]
[   36.119470][  T744]  __dev_open+0xd6/0x170
[   36.120470][  T744]  __dev_change_flags+0x181/0x1d0
[   36.121644][  T744]  dev_change_flags+0x23/0x60
[   36.122741][  T744]  do_setlink+0x30a/0x11e0
[   36.123778][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.124929][  T744]  ? __nla_validate_parse.part.6+0x45/0x8e0
[   36.126309][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.127457][  T744]  __rtnl_newlink+0x546/0x8e0
[   36.128560][  T744]  ? lock_acquire+0xb4/0x3b0
[   36.129623][  T744]  ? deactivate_slab.isra.85+0x6a1/0x850
[   36.130946][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.132102][  T744]  ? lock_acquire+0xb4/0x3b0
[   36.133176][  T744]  ? is_bpf_text_address+0x5/0xe0
[   36.134364][  T744]  ? rtnl_newlink+0x2e/0x70
[   36.135445][  T744]  ? rcu_read_lock_sched_held+0x32/0x60
[   36.136771][  T744]  ? kmem_cache_alloc_trace+0x2d8/0x380
[   36.138070][  T744]  ? rtnl_newlink+0x2e/0x70
[   36.139164][  T744]  rtnl_newlink+0x47/0x70
[ ... ]

Fixes: 845e0ebb ("net: change addr_list_lock back to static key")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1fc70edb
    • T
      net: core: introduce struct netdev_nested_priv for nested interface infrastructure · eff74233
      由 Taehee Yoo 提交于 
      Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.

In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      eff74233
    • T
      net: core: add __netdev_upper_dev_unlink() · fe8300fd
      由 Taehee Yoo 提交于 
      The netdev_upper_dev_unlink() has to work differently according to flags.
This idea is the same with __netdev_upper_dev_link().

In the following patches, new flags will be added.
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fe8300fd
  45. 24 9月, 2020 1 次提交
  47. 19 9月, 2020 2 次提交
    • R
      net: core: delete duplicated words · 4250b75b
      由 Randy Dunlap 提交于 
      Drop repeated words in net/core/.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4250b75b
    • F
      net: use exponential backoff in netdev_wait_allrefs · 0e4be9e5
      由 Francesco Ruggeri 提交于 
      The combination of aca_free_rcu, introduced in commit 2384d025
("net/ipv6: Add anycast addresses to a global hashtable"), and
fib6_info_destroy_rcu, introduced in commit 9b0a8da8 ("net/ipv6:
respect rcu grace period before freeing fib6_info"), can result in
an extra rcu grace period being needed when deleting an interface,
with the result that netdev_wait_allrefs ends up hitting the msleep(250),
which is considerably longer than the required grace period.
This can result in long delays when deleting a large number of interfaces,
and it can be observed with this script:

ns=dummy-ns
NIFS=100

ip netns add $ns
ip netns exec $ns ip link set lo up
ip netns exec $ns sysctl net.ipv6.conf.default.disable_ipv6=0
ip netns exec $ns sysctl net.ipv6.conf.default.forwarding=1

for ((i=0; i<$NIFS; i++))
do
        if=eth$i
        ip netns exec $ns ip link add $if type dummy
        ip netns exec $ns ip link set $if up
        ip netns exec $ns ip -6 addr add 2021:$i::1/120 dev $if
done

for ((i=0; i<$NIFS; i++))
do
        if=eth$i
        ip netns exec $ns ip link del $if
done

ip netns del $ns

Instead of using a fixed msleep(250), this patch tries an extra
rcu_barrier() followed by an exponential backoff.

Time with this patch on a 5.4 kernel:

real	0m7.704s
user	0m0.385s
sys	0m1.230s

Time without this patch:

real    0m31.522s
user    0m0.438s
sys     0m1.156s

v2: use exponential backoff instead of trying to wake up
    netdev_wait_allrefs.
v3: preserve reverse christmas tree ordering of local variables
v4: try an extra rcu_barrier before the backoff, plus some
    cosmetic changes.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0e4be9e5
  49. 16 9月, 2020 1 次提交
  51. 15 9月, 2020 2 次提交
    • V
      __netif_receive_skb_core: don't untag vlan from skb on DSA master · b14a9fc4
      由 Vladimir Oltean 提交于 
      A DSA master interface has upper network devices, each representing an
Ethernet switch port attached to it. Demultiplexing the source ports and
setting skb->dev accordingly is done through the catch-all ETH_P_XDSA
packet_type handler. Catch-all because DSA vendors have various header
implementations, which can be placed anywhere in the frame: before the
DMAC, before the EtherType, before the FCS, etc. So, the ETH_P_XDSA
handler acts like an rx_handler more than anything.

It is unlikely for the DSA master interface to have any other upper than
the DSA switch interfaces themselves. Only maybe a bridge upper*, but it
is very likely that the DSA master will have no 8021q upper. So
__netif_receive_skb_core() will try to untag the VLAN, despite the fact
that the DSA switch interface might have an 8021q upper. So the skb will
never reach that.

So far, this hasn't been a problem because most of the possible
placements of the DSA switch header mentioned in the first paragraph
will displace the VLAN header when the DSA master receives the frame, so
__netif_receive_skb_core() will not actually execute any VLAN-specific
code for it. This only becomes a problem when the DSA switch header does
not displace the VLAN header (for example with a tail tag).

What the patch does is it bypasses the untagging of the skb when there
is a DSA switch attached to this net device. So, DSA is the only
packet_type handler which requires seeing the VLAN header. Once skb->dev
will be changed, __netif_receive_skb_core() will be invoked again and
untagging, or delivery to an 8021q upper, will happen in the RX of the
DSA switch interface itself.

*see commit 9eb8eff0 ("net: bridge: allow enslaving some DSA master
network devices". This is actually the reason why I prefer keeping DSA
as a packet_type handler of ETH_P_XDSA rather than converting to an
rx_handler. Currently the rx_handler code doesn't support chaining, and
this is a problem because a DSA master might be bridged.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b14a9fc4
    • P
      net: try to avoid unneeded backlog flush · 2de79ee2
      由 Paolo Abeni 提交于 
      flush_all_backlogs() may cause deadlock on systems
running processes with FIFO scheduling policy.

The above is critical in -RT scenarios, where user-space
specifically ensure no network activity is scheduled on
the CPU running the mentioned FIFO process, but still get
stuck.

This commit tries to address the problem checking the
backlog status on the remote CPUs before scheduling the
flush operation. If the backlog is empty, we can skip it.

v1 -> v2:
 - explicitly clear flushed cpu mask - Eric
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2de79ee2
  53. 11 9月, 2020 2 次提交