HW Blocks:

        +--------+  +-----+  +------+
        |  OPTC  |  | HDA |  | HUBP |
        +--------+  +-----+  +------+
            |          |        |
            |          |        |
    HPO ====|==========|========|====
     |      |          v        |
     |      |       +-----+     |
     |      |       | APG |     |
     |      |       +-----+     |
     |      |          |        |
     |      v          v        v
     |     +---------------------+
     |     |  HPO Stream Encoder |
     |     +---------------------+
     |                 |
     |                 v
     |      +--------------------+
     |      |  HPO Link Encoder  |
     |      +--------------------+
     |                 |
     v  ===============|=============
                       v
              +------------------+
              |  DIO Output Mux  |
              +------------------+
                       |
                       v
                    +-----+
                    | PHY |
                    +-----+
                       | PHYD32CLK[0]
                       v
                    +------+
                    | DCCG |
                    +------+
                       |
                       v
                   SYMCLK32
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HW Blocks:

        +--------+  +-----+  +------+
        |  OPTC  |  | HDA |  | HUBP |
        +--------+  +-----+  +------+
            |          |        |
            |          |        |
    HPO ====|==========|========|====
     |      |          v        |
     |      |       +-----+     |
     |      |       | APG |     |
     |      |       +-----+     |
     |      |          |        |
     |      v          v        v
     |     +---------------------+
     |     |  HPO Stream Encoder |
     |     +---------------------+
     |                 |
     |                 v
     |      +--------------------+
     |      |  HPO Link Encoder  |
     v      +--------------------+

[squash in warning fixes - Alex]
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HW Blocks:

        +--------+  +-----+  +------+
        |  OPTC  |  | HDA |  | HUBP |
        +--------+  +-----+  +------+
            |          |        |
            |          |        |
    HPO ====|==========|========|====
     |      |          v        |
     |      |       +-----+     |
     |      |       | APG |     |
     |      |       +-----+     |
     |      |          |        |
     v      v          v        v
           +----------------------+
           |  HPO Stream Encoder  |
           +----------------------+

[squash in warning fixes - Alex]
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

HW Blocks:

                    +-----+
                    | HDA |
                    +-----+
                       |
                       |
    HPO ===============|=============
     |                 v
     |              +-----+
     |              | APG |
     v              +-----+
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
lt_settings' pointers remain uninitialized but nonzero if display fails
to light up with no DPCD/EDID info populated, leading to a hang on access
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
The change has caused high idle memory clock speed and power
consumption at some resolutions and frame rates for Navi10

[HOW]
Reverted change "drm/amd/display: Fixed Intermittent blue
screen on OLED panel"
Reviewed-by: NAric Cyr  <aric.cyr@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAngus Wang <angus.wang@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Free memory allocated if any of the previous allocations failed.

>>>     CID 1487129:  Resource leaks  (RESOURCE_LEAK)
>>>     Variable "vpg" going out of scope leaks the storage it points to.

Addresses-Coverity-ID: 1487129: ("Resource leaks")
Reviewed-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Scatter/gather is APU feature starting from carrizo.
adev->apu_flags is not used for all APUs.
adev->flags & AMD_IS_APU can be used for all APUs.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING:
return of 0/1 in function 'dcn31_is_panel_backlight_on'
with return type bool

./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING:
return of 0/1 in function 'dcn31_is_panel_powered_on'
with return type bool

Return statements in functions returning bool should use true/false
instead of 1/0.

Generated by: scripts/coccinelle/misc/boolreturn.cocci
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NJing Yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This is a global parameter, not a per pipe parameter and it's useful
for experimenting with the prefetch schedule to be adjustable from
the SOC bb.

[How]
Add a parameter to the SOC bb, default is the existing policy for
all DCN. Fill it in when filling SOC bb parameters.

Revert the policy to use MinDCFClk at the same time since that's not
going to give us P-State in most cases on the spreadsheet.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <Daniel.Wheeler@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
DML is initialized again unnecessarily after its done conditionally.
Remove the duplicate initialization

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Drop hardcoded dispclk, dppclk, phyclk

[How]
Read the corresponding values from clock table entries already populated.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
The DCN3 SoC parameter num_states was calculated but not saved into the
object.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403
Cc: stable@vger.kernel.org
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color
status helps in validation of testcase.

[How]
Add logging based on various color depths and pixel encoding
formats.
Signed-off-by: NPraful Swarnakar <Praful.Swarnakar@amd.com>
Reviewed-by: NHersen Wu <hersenwu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A cleaner solution, only done once on boot.

[How]
Remove previous workaround and configure an extra
vmid one time on boot
Reviewed-by: NKazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
dcn301_calculate_wm_and_dl() causes flickering when external monitor is
connected.

This issue has been fixed before by commit 0e4c0ae5
("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however
part of the fix was gone after commit 2cbcb78c ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next").

[how]
Use dcn30_calculate_wm_and_dlg() instead as in the original fix.

Fixes: 2cbcb78c ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Tested-by: NZhan Liu <zhan.liu@amd.com>
Tested-by: NOliver Logush <oliver.logush@amd.com>
Signed-off-by: NZhan Liu <zhan.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Ensure DCN save init registers after VM setup
- Fix multi-display support for idle opt workqueue
- Use vblank control events for PSR enable/disable
- Create default dc_sink when fail reading EDID under MST
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Compilation of the workqueue fails if not building with the DCN config
option set.

[How]
Guard calls to the flush with the DCN config option to fix the build.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DM initializes VM context after DMCUB initialization.
This results in loss of DCN_VM_CONTEXT registers after z10.

[How]
Notify DMCUB when VM setup is complete, and have DMCUB
save init registers.

v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PSR can disable the HUBP along with the OTG when PSR is active.

We'll hit a pageflip timeout when the OTG is disable because we're no
longer updating the CRTC vblank counter and the pflip high IRQ will
not fire on the flip.

In order to flip the page flip timeout occur we should modify the
enter/exit conditions to match DRM requirements.

[How]
Use our deferred handlers for DRM vblank control to notify DMCU(B)
when it can enable or disable PSR based on whether vblank is disabled or
enabled respectively.

We'll need to pass along the stream with the notification now because
we want to access the CRTC state while the CRTC is locked to get the
stream state prior to the commit.

Retain a reference to the stream so it remains safe to continue to
access and release that reference once we're done with it.

Enable/disable logic follows what we were previously doing in
update_planes.

The workqueue has to be flushed before programming streams or planes
to ensure that we exit out of idle optimizations and PSR before
these events occur if necessary.

To keep the skip count logic the same to avoid FBCON PSR enablement
requires copying the allow condition onto the DM IRQ parameters - a
field that we can actually access from the worker.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The current implementation for idle optimization support only has a
single work item that gets reshuffled into the system workqueue
whenever we receive an enable or disable event.

We can have mismatched events if the work hasn't been processed or if
we're getting control events from multiple displays at once.

This fixes this issue and also makes the implementation usable for
PSR control - which will be addressed in another patch.

[How]
We need to be able to flush remaining work out on demand for driver stop
and psr disable so create a driver specific workqueue instead of using
the system one. The workqueue will be single threaded to guarantee the
ordering of enable/disable events.

Refactor the queue to allocate the control work and deallocate it
after processing it.

Pass the acrtc directly to make it easier to handle psr enable/disable
in a later patch.

Rename things to indicate that it's not just MALL specific.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
While reading remote EDID via Startech 1-to-4 hub, occasionally we
won't get response in time and won't light up corresponding monitor.

Ideally, we can still add generic modes for userspace to choose to try
to light up the monitor and which is done in
drm_helper_probe_single_connector_modes(). So the main problem here is
that we fail .mode_valid since we don't create remote dc_sink for this
case.

[How]
Also add default dc_sink if we can't get the EDID.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The variable dc->clk_mgr is checked in:
  if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock)

This indicates dc->clk_mgr can be NULL.
However, it is dereferenced in:
    if (!dc->clk_mgr->funcs->get_clock)

To fix this null-pointer dereference, check dc->clk_mgr and the function
pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them
is NULL.
Reported-by: NTOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: NTuo Li <islituo@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Building with W=1 complains about an empty 'else' statement, so use the
usual do-nothing-while-0 loop to quieten this warning.

../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
  113 |                                 *state, retry_count);

Fixes: b30eda8d ("drm/amd/display: Add ETW log to dmub_psr_get_state")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work
can't sleep.

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H
CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G        W  OE     5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8
Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021
Workqueue: events_highpri dm_irq_work_func [amdgpu]
Call Trace:
 <IRQ>
 dump_stack+0x5e/0x74
 ___might_sleep.cold+0x87/0x98
 __might_sleep+0x4b/0x80
 kmem_cache_alloc_trace+0x390/0x4f0
 amdgpu_dm_irq_handler+0x171/0x230 [amdgpu]
 amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu]
 amdgpu_ih_process+0x81/0x100 [amdgpu]
 amdgpu_irq_handler+0x26/0xa0 [amdgpu]
 __handle_irq_event_percpu+0x49/0x190
 ? __hrtimer_get_next_event+0x4d/0x80
 handle_irq_event_percpu+0x33/0x80
 handle_irq_event+0x33/0x60
 handle_edge_irq+0x82/0x190
 asm_call_irq_on_stack+0x12/0x20
 </IRQ>
 common_interrupt+0xbb/0x140
 asm_common_interrupt+0x1e/0x40
RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu]
Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3
RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286
RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000
RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430
R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430
 ? amdgpu_cgs_write_register+0x20/0x20 [amdgpu]
 amdgpu_device_rreg+0x17/0x20 [amdgpu]
 amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
 dm_read_reg_func+0x38/0xb0 [amdgpu]
 generic_reg_wait+0x80/0x160 [amdgpu]
 dce_aux_transfer_raw+0x324/0x7c0 [amdgpu]
 dc_link_aux_transfer_raw+0x43/0x50 [amdgpu]
 dm_dp_aux_transfer+0x87/0x110 [amdgpu]
 drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
 drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
 drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper]
 drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
 ? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper]
 dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
 ? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu]
 handle_hpd_rx_irq+0x195/0x240 [amdgpu]
 ? __switch_to_asm+0x42/0x70
 ? __switch_to+0x131/0x450
 dm_irq_work_func+0x19/0x20 [amdgpu]
 process_one_work+0x209/0x400
 worker_thread+0x4d/0x3e0
 ? cancel_delayed_work+0xa0/0xa0
 kthread+0x124/0x160
 ? kthread_park+0x90/0x90
 ret_from_fork+0x22/0x30
Reviewed-by: NAurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAnson Jacob <Anson.Jacob@amd.com>
Cc: stable@vger.kernel.org
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If we're backdoor loading the DMCUB performs more work than just
the PHY reset so we can end up resetting before the cleanup has fully
finished.

[How]
Increase timeout, add udelay between spins to guarantee a minimum.
Reviewed-by: NRoy Chan <roy.chan@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise we can end up processing whatever was left in the register
if the DMCUB was previously reset.

If DMCUB gets force reset too early from another client then we might
not have even acked the disable yet - causing DMCUB instantly shutdown
if the command was 10020000.

[How]
Move the GPINT clear outside of the reset loop and do it unconditionally
after the DMCUB has been properly reset.
Reviewed-by: NRoy Chan <roy.chan@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Fix memory allocation in dm IRQ context to use GFP_ATOMIC
- Increase timeout threshold for DMCUB reset
- Clear GPINT after DMCUB has reset
- Add AUX I2C tracing
- Fix code commenting style
- Some refactoring
- Remove invalid assert for ODM + MPC case
Reviewed-by: NWyatt Wood <Wyatt.Wood@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DM needs to be notified when hdcp module has completed
authentication attempt.
Reviewed-by: NBhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Developers can find it useful if the driver can produce
AUX traces without special equipment.

[How]
Add AUX tracing.
Reviewed-by: NZhan Liu <zhan.liu@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAshley Thomas <Ashley.Thomas2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How]
the programming sequeune was for old asic.
the correct programming sequeunce should be similar to the one
used in mpc. the fix is copied from the mpc programming sequeunce.
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If the plane has been removed, the writeback disablement logic
doesn't run

[How]
fix the logic order
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NRoy Chan <roy.chan@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Cc: stable@vger.kernel.org
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The variable eng_id is being initialized with a value that is never
read, it is being re-assigned on the next statment. The assignment
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>