- 11 3月, 2009 25 次提交
-
-
由 Ian Dall 提交于
Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=11061 sockaddr structures can't be reliably compared using memcmp() because there are padding bytes in the structure which can't be guaranteed to be the same even when the sockaddr structures refer to the same socket. Instead compare all the relevant fields. In the case of IPv6 sin6_flowinfo is not compared because it only affects QoS and sin6_scope_id is only compared if the address is "link local" because "link local" addresses need only be unique to a specific link. Signed-off-by: NIan Dall <ian@beware.dropbear.id.au> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Suresh Jayaraman 提交于
Hi Trond, I have been looking at a bugreport where trying to open applications on KDE on a NFS mounted home fails temporarily. There have been multiple reports on different kernel versions pointing to this common issue: http://bugzilla.kernel.org/show_bug.cgi?id=12557 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/269954 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508866.html This issue can be reproducible consistently by doing this on a NFS mounted home (KDE): 1. Open 2 xterm sessions 2. From one of the xterm session, do "ssh -X <remote host>" 3. "stat ~/.Xauthority" on the remote SSH session 4. Close the two xterm sessions 5. On the server do a "stat ~/.Xauthority" 6. Now on the client, try to open xterm This will fail. Even if the filehandle had become stale, the NFS client should invalidate the cache/inode and should repeat LOOKUP. Looking at the packet capture when the failure occurs shows that there were two subsequent ACCESS() calls with the same filehandle and both fails with -ESTALE error. I have tested the fix below. Now the client issue a LOOKUP after the ACCESS() call fails with -ESTALE. If all this makes sense to you, can you consider this for inclusion? Thanks, If the server returns an -ESTALE error due to stale filehandle in response to an ACCESS() call, we need to invalidate the cache and inode so that LOOKUP() can be retried. Without this change, the nfs client retries ACCESS() with the same filehandle, fails again and could lead to temporary failure of applications running on nfs mounted home. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The NFS mount command may pass an AF_INET server address to lockd. If lockd happens to be using a PF_INET6 listener, the nlm_cmp_addr() in nlmclnt_grant() will fail to match requests from that host because they will all have a mapped IPv4 AF_INET6 address. Adopt the same solution used in nfs_sockaddr_match_ipaddr() for NFSv4 callbacks: if either address is AF_INET, map it to an AF_INET6 address before doing the comparison. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up/micro-optimatization: Make the AF_INET-only version of nlm_cmp_addr() smaller. This matches the style of nlm_privileged_requester(), and makes the AF_INET-only version of nlm_cmp_addr() nearly the same size as it was before IPv6 support. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Fix a memory leak due to allocation in the XDR layer. In cases where the RPC call needs to be retransmitted, we end up allocating new pages without clearing the old ones. Fix this by moving the allocation into nfs3_proc_setacls(). Also fix an issue discovered by Kevin Rudd, whereby the amount of memory reserved for the acls in the xdr_buf->head was miscalculated, and causing corruption. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The changeset ea31a443 (nfs: Fix misparsing of nfsv4 fs_locations attribute) causes the mountpath that is calculated at the beginning of try_location() to be clobbered when we later strncpy a non-nul terminated hostname using an incorrect buffer length. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We should probably not be testing any flags after we've cleared the RPC_TASK_RUNNING flag, since rpc_make_runnable() is then free to assign the rpc_task to another workqueue, which may then destroy it. We can fix any races with rpc_make_runnable() by ensuring that we only clear the RPC_TASK_RUNNING flag while holding the rpc_wait_queue->lock that the task is supposed to be sleeping on (and then checking whether or not the task really is sleeping). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Samuel CUELLA 提交于
Prevent the kernel from being crashed by a divide-by-zero operation when supplied an incorrectly filled 'struct fb_var_screeninfo' from userland. Previously i810_main.c:1005 (i810_check_params) was using the global 'yres' symbol previously defined at i810_main.c:145 as a module parameter value holder (i810_main.c:2174). If i810fb is compiled-in or if this param doesn't get a default value, this direct usage leads to a divide-by-zero at i810_main.c:1005 (i810_check_params). The patch simply replace the 'yres' global, perhaps undefined symbol usage by a given parameter structure lookup. This problem occurs with directfb, mplayer -vo fbdev, SDL library. It was also reported ( but non solved ) at: http://mail.directfb.org/pipermail/directfb-dev/2008-March/004050.htmlSigned-off-by: NSamuel CUELLA <samuel.cuella@supinfo.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steven King 提交于
There isn't any mcfqspi.h in the tree, and without it everything inside the #ifdef CONFIG_SPI is uncompilable. Signed-off-by: NSteven King <sfking@fdwdc.com> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steven King 提交于
Signed-off-by: NSteven King <sfking@fdwdc.com> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul E. McKenney 提交于
Update the RCU documentation to call out the need for callers of primitives like call_rcu() and synchronize_rcu() to prevent subsequent RCU readers from hazard. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dhaval Giani 提交于
We were returning early in the sysfs directory cleanup function if the user belonged to a non init usernamespace. Due to this a lot of the cleanup was not done and we were left with a leak. Fix the leak. Reported-by: NSerge Hallyn <serue@linux.vnet.ibm.com> Signed-off-by: NDhaval Giani <dhaval@linux.vnet.ibm.com> Acked-by: NSerge Hallyn <serue@us.ibm.com> Tested-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
commit e480814f ("[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer dereference in physmap_flash_remove when called from the error path in physmap_flash_probe (if map_probe failed). Call del_mtd_{partition,device} only if info->cmtd was not NULL. Reported-by: NpHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lubomir Rintel 提交于
When GTT size is equal to amount of video memory, the amount of GTT entries is computed lower than zero, which is invalid and leads to off-by-one error in intel_i915_configure() Originally posted here: http://bugzilla.kernel.org/show_bug.cgi?id=12539 http://bugzilla.redhat.com/show_bug.cgi?id=445592Signed-off-by: NLubomir Rintel <lkundrak@v3.sk> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: NEric Anholt <eric@anholt.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Newton 提交于
Commit 771999b6 ("[MTD] DataFlash: bugfix, binary page sizes now handled") broke support for probing AT45DB321C flash chips. These chips do not support the "page size" status bit, so if we match the JEDEC id return early. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NWill Newton <will.newton@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul E. McKenney 提交于
Fix a problem in the IDR system, where an idr_remove_all() hands a data element to call_rcu() (via free_layer()) before making that data element inaccessible to new readers. This is very bad, and results in readers still having a reference to this data element at the end of the grace period. Tests on large machines that concurrently map and unmap user-space memory within the same multithreaded process result in crashes within about five minutes. Applying this patch increases the kernel's longevity to the three-to-eight-hour range. There appear to be other similar problems in idr_get_empty_slot() and sub_remove(), but I fixed the easy one in idr_remove_all() first. It is therefore no surprise that failures still occur. Located-by: NMilton Miller II <miltonm@austin.ibm.com> Tested-by: NMilton Miller II <miltonm@austin.ibm.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Very annoying when working with containters. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
Impact: fix bug to make agp work with dri Jeffrey reported that dri does work with 64bit, but doesn't work with 32bit it turns out NB aperture is 32M, aperture on agp is 128M 64bit is using 64M for vaidation for 64 iommu/gart 32bit is only using 32M..., and will not update the nb aperture. So try to compare nb apterture and agp apterture before leaving not touch nb aperture. Reported-by: NJeffrey Trull <jetrull@sbcglobal.net> Tested-by: NJeffrey Trull <jetrull@sbcglobal.net> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NDave Airlie <airlied@linux.ie> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
* ->put_char changes * HIGHMEM is bogus it seems, there is no kmap_atomic() et al * some includes Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NChris Zankel <zankel@tensilica.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feb ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu. Fix by moving it to just after all of the EMBEDDED menu symbols. Also, ANON_INODES has a similar problem, so move it to just above the EMBEDDED menu items since it is used in the EMBEDDED menu. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
get_nid_for_pfn() returns int Presumably the (nid < 0) case has never happened. We do know that it is happening on one system while creating a symlink for a memory section so it should also happen on the same system if unregister_mem_sect_under_nodes() were called to remove the same symlink. The test was actually added in response to a problem with an earlier version reported by Yasunori Goto where one or more of the leading pages of a memory section on the 2nd node of one of his systems was uninitialized because I believe they coincided with a memory hole. That earlier version did not ignore uninitialized pages and determined the nid by considering only the 1st page of each memory section. This caused the symlink to the 1st memory section on the 2nd node to be incorrectly created in /sys/devices/system/node/node0 instead of /sys/devices/system/node/node1. The problem was fixed by adding the test to skip over uninitialized pages. I suspect we have not seen any reports of the non-removal of a symlink due to the incorrect declaration of the nid variable in unregister_mem_sect_under_nodes() because - systems where a memory section could have an uninitialized range of leading pages are probably rare. - memory remove is probably not done very frequently on the systems that are capable of demonstrating the problem. - lingering symlink(s) that should have been removed may have simply gone unnoticed. [garyhade@us.ibm.com: wrote changelog] Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix remove_kmmio_fault_pages()
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: video: deferred io cleanup fix for sh_mobile_lcdcfb sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
-
- 10 3月, 2009 10 次提交
-
-
由 Magnus Damm 提交于
Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Other compilation errors were revised by commit of "sh: ap325rxa: Revert ov772x support" (08c2f5b4) but other compilation errors are given. We revert this commit and need to add new header(media/soc_camera.h). This change revises new compilation error. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: fix deadlock when stopping arrays
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
-
由 Oleg Nesterov 提交于
CLONE_PARENT can fool the ->self_exec_id/parent_exec_id logic. If we re-use the old parent, we must also re-use ->parent_exec_id to make sure exit_notify() sees the right ->xxx_exec_id's when the CLONE_PARENT'ed task exits. Also, move down the "p->parent_exec_id = p->self_exec_id" thing, to place two different cases together. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jones 提交于
Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
This reverts commit e088e4c9. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: NDave Jones <davej@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: fix for CONFIG_SPARSE_IRQ=y lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix spinlock assertions on UP systems
-
- 09 3月, 2009 5 次提交
-
-
由 Chris Mason 提交于
btrfs_tree_locked was being used to make sure a given extent_buffer was properly locked in a few places. But, it wasn't correct for UP compiled kernels. This switches it to using assert_spin_locked instead, and renames it to btrfs_assert_tree_locked to better reflect how it was really being used. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Heiko Carstens 提交于
Frans Pop reported the crash below when running an s390 kernel under Hercules: Kernel BUG at 000738b4 verbose debug info unavailable! fixpoint divide exception: 0009 #1! SMP Modules linked in: nfs lockd nfs_acl sunrpc ctcm fsm tape_34xx cu3088 tape ccwgroup tape_class ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod dasd_eckd_mod dasd_mod CPU: 0 Not tainted 2.6.27.19 #13 Process awk (pid: 2069, task: 0f9ed9b8, ksp: 0f4f7d18) Krnl PSW : 070c1000 800738b4 (acct_update_integrals+0x4c/0x118) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 Krnl GPRS: 00000000 000007d0 7fffffff fffff830 00000000 ffffffff 00000002 0f9ed9b8 00000000 00008ca0 00000000 0f9ed9b8 0f9edda4 8007386e 0f4f7ec8 0f4f7e98 Krnl Code: 800738aa: a71807d0 lhi %r1,2000 800738ae: 8c200001 srdl %r2,1 800738b2: 1d21 dr %r2,%r1 >800738b4: 5810d10e l %r1,270(%r13) 800738b8: 1823 lr %r2,%r3 800738ba: 4130f060 la %r3,96(%r15) 800738be: 0de1 basr %r14,%r1 800738c0: 5800f060 l %r0,96(%r15) Call Trace: ( <000000000004fdea>! blocking_notifier_call_chain+0x1e/0x2c) <0000000000038502>! do_exit+0x106/0x7c0 <0000000000038c36>! do_group_exit+0x7a/0xb4 <0000000000038c8e>! SyS_exit_group+0x1e/0x30 <0000000000021c28>! sysc_do_restart+0x12/0x16 <0000000077e7e924>! 0x77e7e924 Reason for this is that cpu time accounting usually only happens from interrupt context, but acct_update_integrals gets also called from process context with interrupts enabled. So in acct_update_integrals we may end up with the following scenario: Between reading tsk->stime/tsk->utime and tsk->acct_timexpd an interrupt happens which updates accouting values. This causes acct_timexpd to be greater than the former stime + utime. The subsequent calculation of dtime = cputime_sub(time, tsk->acct_timexpd); will be negative and the division performed by cputime_to_jiffies(dtime) will generate an exception since the result won't fit into a 32 bit register. In order to fix this just always disable interrupts while accessing any of the accounting values. Reported by: Frans Pop <elendil@planet.nl> Tested by: Frans Pop <elendil@planet.nl> Cc: stable@kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Rusty Russell 提交于
Impact: fix lguest boot crash on modern Intel machines The code in early_init_intel does: if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { u64 misc_enable; rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); And that rdmsr faults (not allowed from non-0 PL). We can get around this by mugging the family ID part of the cpuid. 5 seems like a good number. Of course, this is a hack (how very lguest!). We could just indicate that we don't support MSRs, or implement lguest_rdmst. Reported-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Tested-by: NPatrick McHardy <kaber@trash.net>
-
由 Stuart Bennett 提交于
Impact: fix race+crash in mmiotrace The list manipulation in remove_kmmio_fault_pages() was broken. If more than one consecutive kmmio_fault_page was re-added during the grace period between unregister_kmmio_probe() and remove_kmmio_fault_pages(), the list manipulation failed to remove pages from the release list. After a second grace period the pages get into rcu_free_kmmio_fault_pages() and raise a BUG_ON() kernel crash. The list manipulation is fixed to properly remove pages from the release list. This bug has been present from the very beginning of mmiotrace in the mainline kernel. It was introduced in 0fd0e3da ("x86: mmiotrace full patch, preview 1"); An urgent fix for Linus. Tested by Stuart (on 32-bit) and Pekka (on amd and intel 64-bit systems, nouveau and nvidia proprietary). Signed-off-by: NStuart Bennett <stuart@freedesktop.org> Signed-off-by: NPekka Paalanen <pq@iki.fi> LKML-Reference: <20090308202135.34933feb@daedalus.pq.iki.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-