- 07 3月, 2012 6 次提交
-
-
由 Tejun Heo 提交于
Rename and extend elv_queisce_start/end() to blk_queue_bypass_start/end() which are exported and supports nesting via @q->bypass_depth. Also add blk_queue_bypass() to test bypass state. This will be further extended and used for blkio_group management. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
elevator_ops->elevator_init_fn() has a weird return value. It returns a void * which the caller should assign to q->elevator->elevator_data and %NULL return denotes init failure. Update such that it returns integer 0/-errno and sets elevator_data directly as necessary. This makes the interface more conventional and eases further cleanup. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
Elevator switch tries hard to keep as much as context until new elevator is ready so that it can revert to the original state if initializing the new elevator fails for some reason. Unfortunately, with more auxiliary contexts to manage, this makes elevator init and exit paths too complex and fragile. This patch makes elevator_switch() unregister the current elevator and flush icq's before start initializing the new one. As we still keep the old elevator itself, the only difference is that we lose icq's on rare occassions of switching failure, which isn't critical at all. Note that this makes explicit elevator parameter to elevator_init_queue() and __elv_register_queue() unnecessary as they always can use the current elevator. This patch enables block cgroup cleanups. -v2: blk_add_trace_msg() prints elevator name from @new_e instead of @e->type as the local variable no longer exists. This caused build failure on CONFIG_BLK_DEV_IO_TRACE. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
cfq has been registering zeroed blkio_poilcy_cfq if CFQ_GROUP_IOSCHED is disabled. This fortunately doesn't collide with blk-throtl as BLKIO_POLICY_PROP is zero but is unnecessary and risky. Just don't register it if not enabled. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
Block cgroup core can be built as module; however, it isn't too useful as blk-throttle can only be built-in and cfq-iosched is usually the default built-in scheduler. Scheduled blkcg cleanup requires calling into blkcg from block core. To simplify that, disallow building blkcg as module by making CONFIG_BLK_CGROUP bool. If building blkcg core as module really matters, which I doubt, we can revisit it after blkcg API cleanup. -v2: Vivek pointed out that IOSCHED_CFQ was incorrectly updated to depend on BLK_CGROUP. Fixed. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
Currently, blk_cleanup_queue() doesn't call elv_drain_elevator() if q->elevator doesn't exist; however, bio based drivers don't have elevator initialized but can still use blk-throttle. This patch moves q->elevator test inside blk_drain_queue() such that only elv_drain_elevator() is skipped if !q->elevator. -v2: loop can have registered queue which has NULL request_fn. Make sure we don't call into __blk_run_queue() in such cases. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NVivek Goyal <vgoyal@redhat.com> Fold in bug fix from Vivek. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 04 3月, 2012 1 次提交
-
-
由 Dan Carpenter 提交于
"mem" is type u8. We need parenthesis here or it screws up the pointer math probably leading to an oops. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 02 3月, 2012 6 次提交
-
-
由 Alan Stern 提交于
This patch (as1519) fixes a bug in the block layer's disk-events polling. The polling is done by a work routine queued on the system_nrt_wq workqueue. Since that workqueue isn't freezable, the polling continues even in the middle of a system sleep transition. Obviously, polling a suspended drive for media changes and such isn't a good thing to do; in the case of USB mass-storage devices it can lead to real problems requiring device resets and even re-enumeration. The patch fixes things by creating a new system-wide, non-reentrant, freezable workqueue and using it for disk-events polling. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Acked-by: NTejun Heo <tj@kernel.org> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Danny Kukawka 提交于
Set CommandMailbox with memset before use it. Fix for: drivers/block/DAC960.c: In function ‘DAC960_V1_EnableMemoryMailboxInterface’: arch/x86/include/asm/io.h:61:1: warning: ‘CommandMailbox.Bytes[12]’ may be used uninitialized in this function [-Wuninitialized] drivers/block/DAC960.c:1175:30: note: ‘CommandMailbox.Bytes[12]’ was declared here Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Danny Kukawka 提交于
Fixed compiler warning: comparison between ‘DAC960_V2_IOCTL_Opcode_T’ and ‘enum <anonymous>’ Renamed enum, added a new enum for SCSI_10.CommandOpcode in DAC960_V2_ProcessCompletedCommand(). Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Stanislaw Gruszka 提交于
The following situation might occur: __blkdev_get: add_disk: register_disk() get_gendisk() disk_block_events() disk->ev == NULL disk_add_events() __disk_unblock_events() disk->ev != NULL --ev->block Then we unblock events, when they are suppose to be blocked. This can trigger events related block/genhd.c warnings, but also can crash in sd_check_events() or other places. I'm able to reproduce crashes with the following scripts (with connected usb dongle as sdb disk). <snip> DEV=/dev/sdb ENABLE=/sys/bus/usb/devices/1-2/bConfigurationValue function stop_me() { for i in `jobs -p` ; do kill $i 2> /dev/null ; done exit } trap stop_me SIGHUP SIGINT SIGTERM for ((i = 0; i < 10; i++)) ; do while true; do fdisk -l $DEV 2>&1 > /dev/null ; done & done while true ; do echo 1 > $ENABLE sleep 1 echo 0 > $ENABLE done </snip> I use the script to verify patch fixing oops in sd_revalidate_disk http://marc.info/?l=linux-scsi&m=132935572512352&w=2 Without Jun'ichi Nomura patch titled "Fix NULL pointer dereference in sd_revalidate_disk" or this one, script easily crash kernel within a few seconds. With both patches applied I do not observe crash. Unfortunately after some time (dozen of minutes), script will hung in: [ 1563.906432] [<c08354f5>] schedule_timeout_uninterruptible+0x15/0x20 [ 1563.906437] [<c04532d5>] msleep+0x15/0x20 [ 1563.906443] [<c05d60b2>] blk_drain_queue+0x32/0xd0 [ 1563.906447] [<c05d6e00>] blk_cleanup_queue+0xd0/0x170 [ 1563.906454] [<c06d278f>] scsi_free_queue+0x3f/0x60 [ 1563.906459] [<c06d7e6e>] __scsi_remove_device+0x6e/0xb0 [ 1563.906463] [<c06d4aff>] scsi_forget_host+0x4f/0x60 [ 1563.906468] [<c06cd84a>] scsi_remove_host+0x5a/0xf0 [ 1563.906482] [<f7f030fb>] quiesce_and_remove_host+0x5b/0xa0 [usb_storage] [ 1563.906490] [<f7f03203>] usb_stor_disconnect+0x13/0x20 [usb_storage] Anyway I think this patch is some step forward. As drawback, I do not teardown on sysfs file create error, because I do not know how to nullify disk->ev (since it can be used). However add_disk error handling practically does not exist too, and things will work without this sysfs file, except events will not be exported to user space. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NTejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Muthukumar R 提交于
Fix setting bio flags in drivers (sd_dif/floppy). Signed-off-by: NMuthukumar R <muthur@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jun'ichi Nomura 提交于
Since 2.6.39 (1196f8b8), when a driver returns -ENOMEDIUM for open(), __blkdev_get() calls rescan_partitions() to remove in-kernel partition structures and raise KOBJ_CHANGE uevent. However it ends up calling driver's revalidate_disk without open and could cause oops. In the case of SCSI: process A process B ---------------------------------------------- sys_open __blkdev_get sd_open returns -ENOMEDIUM scsi_remove_device <scsi_device torn down> rescan_partitions sd_revalidate_disk <oops> Oopses are reported here: http://marc.info/?l=linux-scsi&m=132388619710052 This patch separates the partition invalidation from rescan_partitions() and use it for -ENOMEDIUM case. Reported-by: NHuajun Li <huajun.li.lee@gmail.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: NTejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 15 2月, 2012 8 次提交
-
-
由 Tejun Heo 提交于
While updating locking, b2efa052 "block, cfq: unlink cfq_io_context's immediately" moved elevator_exit_icq_fn() invocation from exit_io_context() to the final ioc put. While this doesn't cause catastrophic failure, it effectively removes task exit notification to elevator and cause noticeable IO performance degradation with CFQ. On task exit, CFQ used to immediately expire the slice if it was being used by the exiting task as no more IO would be issued by the task; however, after b2efa052, the notification is lost and disk could sit idle needlessly, leading to noticeable IO performance degradation for certain workloads. This patch renames ioc_exit_icq() to ioc_destroy_icq(), separates elevator_exit_icq_fn() invocation into ioc_exit_icq() and invokes it from exit_io_context(). ICQ_EXITED flag is added to avoid invoking the callback more than once for the same icq. Walking icq_list from ioc side and invoking elevator callback requires reverse double locking. This may be better implemented using RCU; unfortunately, using RCU isn't trivial. e.g. RCU protection would need to cover request_queue and queue_lock switch on cleanup makes grabbing queue_lock from RCU unsafe. Reverse double locking should do, at least for now. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-and-bisected-by: NShaohua Li <shli@kernel.org> LKML-Reference: <CANejiEVzs=pUhQSTvUppkDcc2TNZyfohBRLygW5zFmXyk5A-xQ@mail.gmail.com> Tested-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
Reverse double lock dancing in ioc_release_fn() can be simplified by just using trylock on the queue_lock and back out from ioc lock on trylock failure. Simplify it. Signed-off-by: NTejun Heo <tj@kernel.org> Tested-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Tejun Heo 提交于
icq->changed was used for ICQ_*_CHANGED bits. Rename it to flags and access it under ioc->lock instead of using atomic bitops. ioc_get_changed() is added so that the changed part can be fetched and cleared as before. icq->flags will be used to carry other flags. Signed-off-by: NTejun Heo <tj@kernel.org> Tested-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
One small bug fix from Axel plus a fix for a build failure in unrealistic but commonly built configs which for some reason manage to survive for an awfully long time in -next without any reports. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix getting voltage in max8649_enable_time() regulator: Fix mc13xxx regulator modular build (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Quoth BenH: "Here are a few powerpc fixes for 3.3, all pretty trivial. I also added the patch to define GET_IP/SET_IP so we can use some more asm-generic goodness." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries/eeh: Fix crash when error happens during device probe powerpc/pseries: Fix partition migration hang in stop_topology_update powerpc/powernv: Disable interrupts while taking phb->lock powerpc: Fix WARN_ON in decrementer_check_overflow powerpc/wsp: Fix IRQ affinity setting powerpc: Implement GET_IP/SET_IP powerpc/wsp: Permanently enable PCI class code workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
MMC fixes for 3.3-rc4: * The most visible fix here is against a regression introduced in 3.3-rc1 that ran cards in Ultra High Speed mode even when they failed to initialize in that mode, leading to lower-speed cards failing to mount. * A lockdep warning introduced in 3.3-rc1 is fixed. * Various other small driver fixes, most notably for a NULL dereference when using highmem with dw_mmc. * tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: dw_mmc: Fix PIO mode with support of highmem mmc: atmel-mci: save and restore sdioirq when soft reset is performed mmc: block: Init ro_lock sysfs attr to fix lockdep warnings mmc: sh_mmcif: fix late delayed work initialisation mmc: tmio_mmc: fix card eject during IO with DMA mmc: core: Fix comparison issue in mmc_compare_ext_csds mmc: core: Fix PowerOff Notify suspend/resume mmc: sdhci-pci: set Medfield SDIO as non-removable mmc: core: add the capability for broken voltage mmc: core: Fix low speed mmc card detection failure mmc: esdhc: set the timeout to the max value mmc: esdhc: add PIO mode support mmc: core: Ensure clocks are always enabled before host interaction mmc: of_mmc_spi: fix little endian support mmc: core: UHS sdio card that fails should not exceed 50MHz mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Two fixes for VCPU offlining; One to fix the string format exposed by the xen-pci[front|back] to conform to the one used in majority of PCI drivers; Two fixes to make the code more resilient to invalid configurations. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> * tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_dev: add missing error check to watch handling xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
sound fixes for 3.3-rc4 Basically all small fixes suited as rc4: a few HD-audio regression fixes, a stable fix for an old Dell laptop with intel8x0, and a simple fix for ASoC fsi. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: intel8x0: Fix default inaudible sound on Gateway M520 ALSA: hda - Fix silent speaker output on Acer Aspire 6935 ALSA: hda - Fix initialization of secondary capture source on VT1705 ASoC: fsi: fixup fsi_pointer() calculation method ALSA: hda - Fix mute-LED VREF value for new HP laptops
-
- 14 2月, 2012 19 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by: NBenjamin Carlson <elderbubba0810@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
A simple fix from Morimoto-san for the pointer() operation in the FSI driver.
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.samba.org/sfrench/cifs-2.6: cifs: don't return error from standard_receive3 after marking response malformed cifs: request oplock when doing open on lookup cifs: fix error handling when cifscreds key payload is an error
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
This updates the sha512 fix so that it doesn't cause excessive stack usage on i386. This is done by reverting to the original code, and avoiding the W duplication by moving its initialisation into the loop. As the underlying code is in fact the one that we have used for years, I'm pushing this now instead of postponing to the next cycle. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - Avoid stack bloat on i386 crypto: sha512 - Use binary and instead of modulus
-
EEH may happen during a PCI driver probe. If the driver is trying to access some register in a loop, the EEH code will try to print the driver name. But the driver pointer in struct pci_dev is not set until probe returns successfully. Use a function to test if the device and the driver pointer is NULL before accessing the driver's name. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Brian King 提交于
This fixes a hang that was observed during live partition migration. Since stop_topology_update must not be called from an interrupt context, call it earlier in the migration process. The hang observed can be seen below: WARNING: at kernel/timer.c:1011 Modules linked in: ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop ibmveth sg ext3 jbd mbcache raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc dm_round_robin dm_multipath scsi_dh sd_mod crc_t10dif ibmvfc scsi_transport_fc scsi_tgt scsi_mod dm_snapshot dm_mod NIP: c0000000000c52d8 LR: c00000000004be28 CTR: 0000000000000000 REGS: c00000005ffd77d0 TRAP: 0700 Not tainted (3.2.0-git-00001-g07d106d0) MSR: 8000000000021032 <ME,CE,IR,DR> CR: 48000084 XER: 00000001 CFAR: c00000000004be20 TASK = c00000005ec78860[0] 'swapper/3' THREAD: c00000005ec98000 CPU: 3 GPR00: 0000000000000001 c00000005ffd7a50 c000000000fbbc98 c000000000ec8340 GPR04: 00000000282a0020 0000000000000000 0000000000004000 0000000000000101 GPR08: 0000000000000012 c00000005ffd4000 0000000000000020 c000000000f3ba88 GPR12: 0000000000000000 c000000007f40900 0000000000000001 0000000000000004 GPR16: 0000000000000001 0000000000000000 0000000000000000 c000000001022310 GPR20: 0000000000000001 0000000000000000 0000000000200200 c000000001029e14 GPR24: 0000000000000000 0000000000000001 0000000000000040 c00000003f74bc80 GPR28: c00000003f74bc84 c000000000f38038 c000000000f16b58 c000000000ec8340 NIP [c0000000000c52d8] .del_timer_sync+0x28/0x60 LR [c00000000004be28] .stop_topology_update+0x20/0x38 Call Trace: [c00000005ffd7a50] [c00000005ec78860] 0xc00000005ec78860 (unreliable) [c00000005ffd7ad0] [c00000000004be28] .stop_topology_update+0x20/0x38 [c00000005ffd7b40] [c000000000028378] .__rtas_suspend_last_cpu+0x58/0x260 [c00000005ffd7bf0] [c0000000000fa230] .generic_smp_call_function_interrupt+0x160/0x358 [c00000005ffd7cf0] [c000000000036ec8] .smp_ipi_demux+0x88/0x100 [c00000005ffd7d80] [c00000000005c154] .icp_hv_ipi_action+0x5c/0x80 [c00000005ffd7e00] [c00000000012a088] .handle_irq_event_percpu+0x100/0x318 [c00000005ffd7f00] [c00000000012e774] .handle_percpu_irq+0x84/0xd0 [c00000005ffd7f90] [c000000000022ba8] .call_handle_irq+0x1c/0x2c [c00000005ec9ba20] [c00000000001157c] .do_IRQ+0x22c/0x2a8 [c00000005ec9bae0] [c0000000000054bc] hardware_interrupt_entry+0x18/0x1c Exception: 501 at .cpu_idle+0x194/0x2f8 LR = .cpu_idle+0x194/0x2f8 [c00000005ec9bdd0] [c000000000017e58] .cpu_idle+0x188/0x2f8 (unreliable) [c00000005ec9be90] [c00000000067ec18] .start_secondary+0x3e4/0x524 [c00000005ec9bf90] [c0000000000093e8] .start_secondary_prolog+0x10/0x14 Instruction dump: ebe1fff8 4e800020 fbe1fff8 7c0802a6 f8010010 7c7f1b78 f821ff81 78290464 80090014 5400019e 7c0000d0 78000fe0 <0b000000> 4800000c 7c210b78 7c421378 Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
We need to disable interrupts when taking the phb->lock. Otherwise we could deadlock with pci_lock taken from an interrupt. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We use __get_cpu_var() which triggers a false positive warning in smp_processor_id() thinking interrupts are enabled (at this point, they are soft-enabled but hard-disabled). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
We call the cache_hwirq_map() function with a linux IRQ number but it expects a HW irq number. This triggers a BUG on multic-chip setups in addition to not doing the right thing. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Srikar Dronamraju 提交于
With this change, helpers such as instruction_pointer() et al, get defined in the generic header in terms of GET_IP Removed the unnecessary definition of profile_pc in !CONFIG_SMP case as suggested by Mike Frysinger. Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
It appears that on the Chroma card, the class code of the root complex is still wrong even on DD2 or later chips. This could be a firmware issue, but that breaks resource allocation so let's unconditionally fix it up. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Seungwon Jeon 提交于
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com> Acked-by: NWill Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Ludovic Desroches 提交于
Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Rabin Vincent 提交于
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NJohan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: NUlf Hansson <ulf.hansson@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
If the driver is loaded with a card in the slot, mmc_add_host() will schedule an immediate card-detection work, which will start IO and wait for command completion. Usually the kernel first returns to the sh_mmcif probe function, lets it finish and only then schedules the rescan work. But sometimes, expecially under heavy system load, the work will be scheduled immediately before returning to the probe method. In this case it is important for the driver to be fully prepared for IO. For sh_mmcif this means, that also the timeout work has to be initialised before calling mmc_add_host(). It is also better to prepare interrupts beforehand. Besides, since mmc_add_host() does card-detection itself, there is no need to do it again immediately afterwards. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
When DMA is in use and the card is ejected during IO, DMA transfers have to be terminated, otherwise the dmaengine driver fails to operate properly, when the card is re-inserted. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Jurgen Heeks 提交于
Found this issue during code review. Actually, there are two issues which both compensate together in lucky case. In unlucky case the bus width probing might not work as expected. Signed-off-by: NJurgen Heeks <jurgen.heeks@nokia.com> Reviewed-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Girish K S 提交于
Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: NGirish K S <girish.shivananjappa@linaro.org> Tested-by: NGirish K S <girish.shivananjappa@linaro.org> Reviewed-by: NSaugata Das <saugata.das@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Adrian Hunter 提交于
Set Medfield SDIO as non-removable to avoid un-necessary card detect activity. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-