Now that the bugs in mixed mode MPX handling are fixed, re-allow
32-bit binaries on 64-bit kernels again.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183706.70277DAD@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The comment pretty much says it all.

I wrote a test program that does lots of random allocations
and forces bounds tables to be created.  It came up with a
layout like this:

  ....   | BOUNDS DIRECTORY ENTRY COVERS |  ....
         |    BOUNDS TABLE COVERS        |
|  BOUNDS TABLE |  REAL ALLOC | BOUNDS TABLE |

Unmapping "REAL ALLOC" should have been able to free the
bounds table "covering" the "REAL ALLOC" because it was the
last real user.  But, the neighboring VMA bounds tables were
found, considered as real neighbors, and we declined to free
the bounds table covering the area.

Doing this over and over left a small but significant number
of these orphans.  Handling them is fairly straighforward.
All we have to do is walk the VMAs and skip all of the MPX
ones when looking for neighbors.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183706.A6BD90BF@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX code needs to clear out bounds tables for memory which
is no longer in use.  We do this when a userspace mapping is
torn down (unmapped).

There are two modes:

  1. An entire bounds table becomes unused, and can be freed
     and its pointer removed from the bounds directory.  This
     happens either when a large mapping is torn down, or when
     a small mapping is torn down and it is the last mapping
     "covered" by a bounds table.

  2. Only part of a bounds table becomes unused, in which case
     we free the backing memory as if MADV_DONTNEED was called.

The old code was a spaghetti mess of "edge" bounds tables
where the edges were handled specially, even if we were
unmapping an entire one.  Non-edge bounds tables are always
fully unmapped, but share a different code path from the edge
ones.  The old code had a bug where it was unmapping too much
memory.  I worked on fixing it for two days and gave up.

I didn't write the original code.  I didn't particularly like
it, but it worked, so I left it.  After my debug session, I
realized it was undebuggagle *and* buggy, so out it went.

I also wrote a new unmapping test program which uncovers bugs
pretty nicely.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183706.DCAEC67D@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Right now, the kernel can only switch between 64-bit and 32-bit
binaries at compile time. This patch adds support for 32-bit
binaries on 64-bit kernels when we support ia32 emulation.

We essentially choose which set of table sizes to use when doing
arithmetic for the bounds table calculations.

This also uses a different approach for calculating the table
indexes than before.  I think the new one makes it much more
clear what is going on, and allows us to share more code between
the 32-bit and 64-bit cases.
Based-on-patch-by: NQiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183705.E01F21E2@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

user_atomic_cmpxchg_inatomic() actually looks at sizeof(*ptr) to
figure out how many bytes to copy.  If we run it on a 64-bit
kernel with a 64-bit pointer, it will copy a 64-bit bounds
directory entry.  That's fine, except when we have 32-bit
programs with 32-bit bounds directory entries and we only *want*
32-bits.

This patch breaks the cmpxchg() operation out in to its own
function and performs the 32-bit type swizzling in there.

Note, the "64-bit" version of this code _would_ work on a
32-bit-only kernel.  The issue this patch addresses is only for
when the kernel's 'long' is mismatched from the size of the
bounds directory entry of the process we are working on.

The new helper modifies 'actual_old_val' or returns an error.
But gcc doesn't know this, so it warns about 'actual_old_val'
being unused.  Shut it up with an uninitialized_var().
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183705.672B115E@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently, to get from a bounds directory entry to the virtual
address of a bounds table, we simply mask off a few low bits.
However, the set of bits we mask off is different for 32-bit and
64-bit binaries.

This breaks the operation out in to a helper function and also
adds a temporary variable to store the result until we are
sure we are returning one.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183704.007686CE@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we allocate a bounds table, we call mmap(), then add a
"valid" bit to the value before storing it in to the bounds
directory.

If we fail along the way, we go and mask that valid bit
_back_ out.  That seems a little silly, and this makes it
much more clear when we have a plain address versus an
actual table _entry_.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183704.3D69D5F4@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Bounds tables are a significant consumer of memory.  It is
important to know when they are being allocated.  Add a trace
point to trace whenever an allocation occurs and also its
virtual address.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183704.EC23A93E@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are two different events being traced here.  They are
doing similar things so share a trace "EVENT_CLASS" and are
presented together.

1. Trace when MPX is zapping pages "mpx_unmap_zap":

	When MPX can not free an entire bounds table, it will
	instead try to zap unused parts of a bounds table to free
	the backing memory.  This decreases RSS (resident set
	size) without decreasing the virtual space allocated
	for bounds tables.

2. Trace attempts to find bounds tables "mpx_unmap_search":

	This event traces any time we go looking to unmap a
	bounds table for a given virtual address range.  This is
	useful to ensure that the kernel actually "tried" to free
	a bounds table versus times it succeeded in finding one.

	It might try and fail if it realized that a table was
	shared with an adjacent VMA which is not being unmapped.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183703.B9D2468B@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are two basic things that can happen as the result of
a bounds exception (#BR):

	1. We allocate a new bounds table
	2. We pass up a bounds exception to userspace.

This patch adds a trace point for the case where we are
passing the exception up to userspace with a signal.

We are also explicit that we're printing out the inverse of
the 'upper' that we encounter.  If you want to filter, for
instance, you need to ~ the value first.  The reason we do
this is because of how 'upper' is stored in the bounds table.

If a pointer's range is:

	0x1000 -> 0x2000

it is stored in the bounds table as (32-bits here for brevity):

	lower: 0x00001000
	upper: 0xffffdfff

That is so that an all 0's entry:

	lower: 0x00000000
	upper: 0x00000000

corresponds to the "init" bounds which store a *range* of:

	0x00000000 -> 0xffffffff

That is, by far, the common case, and that lets us use the
zero page, or deduplicate the memory, etc... The 'upper'
stored in the table is gibberish to print by itself, so we
print ~upper to get the *actual*, logical, human-readable
value printed out.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183703.027BB9B0@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is the first in a series of MPX tracing patches.
I've found these extremely useful in the process of
debugging applications and the kernel code itself.

This exception hooks in to the bounds (#BR) exception
very early and allows capturing the key registers which
would influence how the exception is handled.

Note that bndcfgu/bndstatus are technically still
64-bit registers even in 32-bit mode.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183703.5FE2619A@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The comment and code here are confusing.  We do not currently
allocate the bounds directory in the kernel.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150607183702.222CEC2A@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX code can only work on the current task.  You can not,
for instance, enable MPX management in another process or
thread. You can also not handle a fault for another process or
thread.

Despite this, we pass a task_struct around prolifically.  This
patch removes all of the task struct passing for code paths
where the code can not deal with another task (which turns out
to be all of them).

This has no functional changes.  It's just a cleanup.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183702.6A81DA2C@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MPX registers (bndcsr/bndcfgu/bndstatus) are not directly
accessible via normal instructions.  They essentially act as
if they were floating point registers and are saved/restored
along with those registers.

There are two main paths in the MPX code where we care about
the contents of these registers:

	1. #BR (bounds) faults
	2. the prctl() code where we are setting MPX up

Both of those paths _might_ be called without the FPU having
been used.  That means that 'tsk->thread.fpu.state' might
never be allocated.

Also, fpu_save_init() is not preempt-safe.  It was a bug to
call it without disabling preemption.  The new
get_xsave_addr() calls unlazy_fpu() instead and properly
disables preemption.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/20150607183701.BC0D37CF@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that reserve_ram_pages_type() accepts the WT type, add
set_memory_wt(), set_memory_array_wt() and set_pages_array_wt()
in order to be able to set memory to Write-Through page cache
mode.

Also, extend ioremap_change_attr() to accept the WT type.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-13-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

As set_memory_wb() calls free_ram_pages_type(), which then calls
set_page_memtype() with -1, _PGMT_DEFAULT is used for tracking
the WB type. _PGMT_WB is defined but unused. Thus, rename
_PGMT_DEFAULT to _PGMT_WB to clarify the usage, and release the
slot used by _PGMT_WB.

Furthermore, change free_ram_pages_type() to call
set_page_memtype() with _PGMT_WB, and get_page_memtype() to
return _PAGE_CACHE_MODE_WB for _PGMT_WB.

Then, define _PGMT_WT in the freed slot. This allows
set_page_memtype() to track the WT type.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-12-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add pgprot_writethrough() for setting page protection flags to
Write-Through mode.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-11-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add ioremap_wt() for creating Write-Through mappings on x86. It
follows the same model as ioremap_wc() for multi-arch support.
Define ARCH_HAS_IOREMAP_WT in the x86 version of io.h to
indicate that ioremap_wt() is implemented on x86.

Also update the PAT documentation file to cover ioremap_wt().
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-8-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

When a target range is in RAM, reserve_ram_pages_type() verifies
the requested type. Change it to fail WT and WP requests with
-EINVAL since set_page_memtype() is limited to handle three
types: WB, WC and UC-.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-6-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Assign Write-Through type to the PA7 slot in the PAT MSR when
the processor is not affected by PAT errata. The PA7 slot is
chosen to improve robustness in the presence of errata that
might cause the high PAT bit to be ignored. This way a buggy PA7
slot access will hit the PA3 slot, which is UC, so at worst we
lose performance without causing a correctness issue.

The following Intel processors are affected by the PAT errata.

  Errata               CPUID
  ----------------------------------------------------
  Pentium 2, A52       family 0x6, model 0x5
  Pentium 3, E27       family 0x6, model 0x7, 0x8
  Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa
  Pentium M, Y26       family 0x6, model 0x9
  Pentium M 90nm, X9   family 0x6, model 0xd
  Pentium 4, N46       family 0xf, model 0x0

Instead of making sharp boundary checks, we remain conservative
and exclude all Pentium 2, 3, M and 4 family processors. For
those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default
setup in __cachemode2pte_tbl[].
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that we emulate a PAT table when PAT is disabled, there's no
need for those checks anymore as the PAT abstraction will handle
those cases too.

Based on a conglomerate patch from Toshi Kani.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-4-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

In the case when PAT is disabled on the command line with
"nopat" or when virtualization doesn't support PAT (correctly) -
see

  9d34cfdf ("x86: Don't rely on VMWare emulating PAT MSR correctly").

we emulate it using the PWT and PCD cache attribute bits. Get
rid of boot_pat_state while at it.

Based on a conglomerate patch from Toshi Kani.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-3-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Split it into a BSP and AP version which makes the PAT
initialization path actually readable again.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-2-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.

The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.

Also add:

  - <linux/init.h> to <linux/io.h>
  - <asm/pgtable_types> to <asm/io.h>

... which were two other implicit header file dependencies.
Suggested-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ]
Acked-by: NDavid Miller <davem@davemloft.net>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Colin Cross <ccross@android.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

... as their only caller is.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5566EE07020000780007E683@mail.emea.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Two Linux device drivers cannot work with PAT and the work
required to make them work is significant. There is not enough
motivation to convert these drivers over to use PAT properly,
the compromise reached is to let drivers that cannot be ported
to PAT check if PAT was enabled and if so fail on probe with a
recommendation to boot with the "nopat" kernel parameter.
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1430425520-22275-4-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-14-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

We use pat_enabled in x86-specific code to see if PAT is enabled
or not but we're granting full access to it even though readers
do not need to set it. If, for instance, we granted access to it
to modules later they then could override the variable
setting... no bueno.

This renames pat_enabled to a new static variable __pat_enabled.
Folks are redirected to use pat_enabled() now.

Code that sets this can only be internal to pat.c. Apart from
the early kernel parameter "nopat" to disable PAT, we also have
a few cases that disable it later and make use of a helper
pat_disable(). It is wrapped under an ifdef but since that code
cannot run unless PAT was enabled its not required to wrap it
with ifdefs, unwrap that. Likewise, since "nopat" doesn't really
change non-PAT systems just remove that ifdef as well.

Although we could add and use an early_param_off(), these
helpers don't use __read_mostly but we want to keep
__read_mostly for __pat_enabled as this is a hot path -- upon
boot, for instance, a simple guest may see ~4k accesses to
pat_enabled(). Since __read_mostly early boot params are not
that common we don't add a helper for them just yet.
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use pr_info() instead of the old printk to prefix the component
where things are coming from. With this readers will know
exactly where the message is coming from. We use pr_* helpers
but define pr_fmt to the empty string for easier grepping for
those error messages.

We leave the users of dprintk() in place, this will print only
when the debugpat kernel parameter is enabled. We want to leave
those enabled as a debug feature, but also make them use the
same prefix.
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
[ Kill pr_fmt. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cocci@systeme.lip6.fr
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Link: http://lkml.kernel.org/r/1430425520-22275-2-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1432628901-18044-9-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds the argument 'uniform' to mtrr_type_lookup(),
which gets set to 1 when a given range is covered uniformly by
MTRRs, i.e. the range is fully covered by a single MTRR entry or
the default type.

Change pud_set_huge() and pmd_set_huge() to honor the 'uniform'
flag to see if it is safe to create a huge page mapping in the
range.

This allows them to create a huge page mapping in a range
covered by a single MTRR entry of any memory type. It also
detects a non-optimal request properly. They continue to check
with the WB type since it does not effectively change the
uniform mapping even if a request spans multiple MTRR entries.

pmd_set_huge() logs a warning message to a non-optimal request
so that driver writers will be aware of such a case. Drivers
should make a mapping request aligned to a single MTRR entry
when the range is covered by MTRRs.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
[ Realign, flesh out comments, improve warning message. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

mtrr_type_lookup() returns verbatim 0xFF when MTRRs are
disabled. This patch defines MTRR_TYPE_INVALID to clarify the
meaning of this value, and documents its usage.

Document the return values of the kernel virtual address mapping
helpers pud_set_huge(), pmd_set_huge, pud_clear_huge() and
pmd_clear_huge().

There is no functional change in this patch.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@intel.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: pebolle@tiscali.nl
Link: http://lkml.kernel.org/r/1431714237-880-5-git-send-email-toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1432628901-18044-5-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use these consistent names:

    struct fregs_state           # was: i387_fsave_struct
    struct fxregs_state          # was: i387_fxsave_struct
    struct swregs_state          # was: i387_soft_struct
    struct xregs_state           # was: xsave_struct
    union  fpregs_state          # was: thread_xstate

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Standardize the naming of the various functions that copy register
content in specific FPU context formats:

  copy_fxregs_to_kernel()         # was: fpu_fxsave()
  copy_xregs_to_kernel()          # was: xsave_state()

  copy_kernel_to_fregs()          # was: frstor_checking()
  copy_kernel_to_fxregs()         # was: fxrstor_checking()
  copy_kernel_to_xregs()          # was: fpu_xrstor_checking()
  copy_kernel_to_xregs_booting()  # was: xrstor_state_booting()

  copy_fregs_to_user()            # was: fsave_user()
  copy_fxregs_to_user()           # was: fxsave_user()
  copy_xregs_to_user()            # was: xsave_user()

  copy_user_to_fregs()            # was: frstor_user()
  copy_user_to_fxregs()           # was: fxrstor_user()
  copy_user_to_xregs()            # was: xrestore_user()
  copy_user_to_fpregs_zeroing()   # was: restore_user_xstate()

Eliminate fpu_xrstor_checking(), because it was just a wrapper.

No change in functionality.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So 6 years ago we made the FPU fpstate dynamically allocated:

  aa283f49 ("x86, fpu: lazy allocation of FPU area - v5")
  61c4628b ("x86, fpu: split FPU state from task struct - v5")

In hindsight this was a mistake:

   - it complicated context allocation failure handling, such as:

		/* kthread execs. TODO: cleanup this horror. */
		if (WARN_ON(fpstate_alloc_init(fpu)))
			force_sig(SIGKILL, tsk);

   - it caused us to enable irqs in fpu__restore():

                local_irq_enable();
                /*
                 * does a slab alloc which can sleep
                 */
                if (fpstate_alloc_init(fpu)) {
                        /*
                         * ran out of memory!
                         */
                        do_group_exit(SIGKILL);
                        return;
                }
                local_irq_disable();

   - it (slightly) slowed down task creation/destruction by adding
     slab allocation/free pattens.

   - it made access to context contents (slightly) slower by adding
     one more pointer dereference.

The motivation for the dynamic allocation was two-fold:

   - reduce memory consumption by non-FPU tasks

   - allocate and handle only the necessary amount of context for
     various XSAVE processors that have varying hardware frame
     sizes.

These days, with glibc using SSE memcpy by default and GCC optimizing
for SSE/AVX by default, the scope of FPU using apps on an x86 system is
much larger than it was 6 years ago.

For example on a freshly installed Fedora 21 desktop system, with a
recent kernel, all non-kthread tasks have used the FPU shortly after
bootup.

Also, even modern embedded x86 CPUs try to support the latest vector
instruction set - so they'll too often use the larger xstate frame
sizes.

So remove the dynamic allocation complication by embedding the FPU
fpstate in task_struct again. This should make the FPU a lot more
accessible to all sorts of atomic contexts.

We could still optimize for the xstate frame size in the future,
by moving the state structure to the last element of task_struct,
and allocating only a part of that.

This change is kept minimal by still keeping the ctx_alloc()/free()
routines (that now do nothing substantial) - we'll remove them in
the following patches.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

So fpu_save_init() is a historic name that got its name when the only
way the FPU state was FNSAVE, which cleared (well, destroyed) the FPU
state after saving it.

Nowadays the name is misleading, because ever since the introduction of
FXSAVE (and more modern FPU saving instructions) the 'we need to reload
the FPU state' part is only true if there's a pending FPU exception [*],
which is almost never the case.

So rename it to copy_fpregs_to_fpstate() to make it clear what's
happening. Also add a few comments about why we cannot keep registers
in certain cases.

Also clean up the control flow a bit, to make it more apparent when
we are dropping/keeping FP registers, and to optimize the common
case (of keeping fpregs) some more.

[*] Probably not true anymore, modern instructions always leave the FPU
    state intact, even if exceptions are pending: because pending FP
    exceptions are posted on the next FP instruction, not asynchronously.

    They were truly asynchronous back in the IRQ13 case, and we had to
    synchronize with them, but that code is not working anymore: we don't
    have IRQ13 mapped in the IDT anymore.

    But a cleanup patch is obviously not the place to change subtle behavior.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This unifies all the FPU related header files under a unified, hiearchical
naming scheme:

 - asm/fpu/types.h:      FPU related data types, needed for 'struct task_struct',
                         widely included in almost all kernel code, and hence kept
                         as small as possible.

 - asm/fpu/api.h:        FPU related 'public' methods exported to other subsystems.

 - asm/fpu/internal.h:   FPU subsystem internal methods

 - asm/fpu/xsave.h:      XSAVE support internal methods

(Also standardize the header guard in asm/fpu/internal.h.)
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It's a pointless wrapper now - use xsave_state().
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Fix a minor header file dependency bug in asm/fpu-internal.h: it
relies on i387.h but does not include it. All users of fpu-internal.h
included it explicitly.

Also remove unnecessary includes, to reduce compilation time.

This also makes it easier to use it as a standalone header file
for FPU internals, such as an upcoming C module in arch/x86/kernel/fpu/.
Reviewed-by: NBorislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Introduce faulthandler_disabled() and use it to check for irq context and
disabled pagefaults (via pagefault_disable()) in the pagefault handlers.

Please note that we keep the in_atomic() checks in place - to detect
whether in irq context (in which case preemption is always properly
disabled).

In contrast, preempt_disable() should never be used to disable pagefaults.
With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt
counter, and therefore the result of in_atomic() differs.
We validate that condition by using might_fault() checks when calling
might_sleep().

Therefore, add a comment to faulthandler_disabled(), describing why this
is needed.

faulthandler_disabled() and pagefault_disable() are defined in
linux/uaccess.h, so let's properly add that include to all relevant files.

This patch is based on a patch from Thomas Gleixner.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The existing code relies on pagefault_disable() implicitly disabling
preemption, so that no schedule will happen between kmap_atomic() and
kunmap_atomic().

Let's make this explicit, to prepare for pagefault_disable() not
touching preemption anymore.
Reviewed-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bigeasy@linutronix.de
Cc: borntraeger@de.ibm.com
Cc: daniel.vetter@intel.com
Cc: heiko.carstens@de.ibm.com
Cc: herbert@gondor.apana.org.au
Cc: hocko@suse.cz
Cc: hughd@google.com
Cc: mst@redhat.com
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: schwidefsky@de.ibm.com
Cc: yang.shi@windriver.com
Link: http://lkml.kernel.org/r/1431359540-32227-5-git-send-email-dahi@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The patch doesn't change any logic.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1429776428-4475-1-git-send-email-decui@microsoft.comSigned-off-by: NIngo Molnar <mingo@kernel.org>