Only update the stream when the IPC message type matches stream type.
Signed-off-by: NPaweł Piskorski <pawel.piskorski@intel.com>
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Make sure we dont issue IPC when we are processing a response.
Signed-off-by: NPaweł Piskorski <pawel.piskorski@intel.com>
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This fixes a bug where we dont delete the current message when an
IPC message timeout occurs.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add dependency to DW_DMAC for broadwell machine, which
have built in DW dma engines.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Platform data may be null during platform_device_add. Allocate platform
data before using.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Check ops pointer members before we can derefference them.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add some debugging info to help with Dx state debug.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add trace notification of IPC stream reset.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add some register definitions for other shim register bits.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

HMDC is the correct naming for this register.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add support for Broadwell based machines with SST DSP audio.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Update FW version readback. IPC_GLB_GET_FW_VERSION reads back
the ABI version whilst the release version is in the mailbox.
Update to use mailbox version for info logging.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The sst-haswell-dsp.c is an ACPI independent file, this patch removes
ACPI header files for it.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This interface will be used by subsequent patches to set/get parameters from DSP
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DSP returns error codes for IPC return so add them in driver
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

the shim registers start and end can be useful while parsing the shim addresses,
so add these
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

All required banks are enabled during boot procedure.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use a table for ADSP IRAM/DRAM bit shift.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Merge D-SRAM0 D-SRAM1 D-SRAM2 to D-SRAM, for wild cat point ADSP mem regions.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch fix the issue that the output is almost silent at the
beginning of starting a playback.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Move codec initial settings from asoc probe to i2c probe.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Move ID check from asoc level to i2c level.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Remove test code.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds Realtek ALC286 codec driver.

ALC286 is a dual mode codec, which can run as HD-A or I2S mode.
It is controlled by HD-A verb commands via I2C protocol.
The following is the I/O difference between ALC286 and general I2S codecs.
1. A HD-A verb command contains three parts, NID, VID, and PID.
   And an I2S command contains only two parts: address and data.
2. Not only the register address is written, but the read command also
   includes the entire write command.
3. rt286 uses different registers for read and write the same bits.

We map verb command to regmap structure. However, we read most registers from
cache to prevent the asymmetry read/write issue in rt286.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NGustaw Lewandowski <gustaw.lewandowski@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Kernel should not enable/disable speakers and digital microphone whenever
jack is inserted/removed. This is more use-case than kernel specific
decision. For instance one may want to play VoIP ring tones using both
speakers and headphone but play music only from one of them.

Because of above reason remove "Ext Spk" and "Int Mic" update when jack
state is changed. Also this update was illogical anyway: "Ext Spk" was
enabled when jack was inserted and disabled when jack was removed.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

As added in previosu patch along with stream to piep conversion si required for
compressed audio too
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Merrifield DSP used various pipelines to identify the streams and processing
modules. Add these defination in the pcm driver and also add a table for device
entries to firmware pipeline id conversion
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Tis will be used to add table based support for pcm front ends in subsequent
patches
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This will be used to update current driver as well as in support for the mrfld
patches
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Now the DSP is capable of reporting the delay, report it to upper layers
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The argument was called mad_substream which is no longer apt as older driver
is not used anymore so rename as arg
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This helps us to handle pcm and compress ops seperately and per dai
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Connect "Headset Mic" to "MICBIAS1" supply widget of RT5640 in order to
enable bias voltage for headset microphones.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DSP initialization complete message IPC_IA_FW_INIT_CMPLT is a large message
carrying firmware details in mailbox. Read and show those details during
init in order to be able to get that information to QA reports.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Pull networking fixes from David Miller:

 1) Fix checksumming regressions, from Tom Herbert.

 2) Undo unintentional permissions changes for SCTP rto_alpha and
    rto_beta sysfs knobs, from Denial Borkmann.

 3) VXLAN, like other IP tunnels, should advertize it's encapsulation
    size using dev->needed_headroom instead of dev->hard_header_len.
    From Cong Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: sctp: fix permissions for rto_alpha and rto_beta knobs
  vxlan: Checksum fixes
  net: add skb_pop_rcv_encapsulation
  udp: call __skb_checksum_complete when doing full checksum
  net: Fix save software checksum complete
  net: Fix GSO constants to match NETIF flags
  udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup
  vxlan: use dev->needed_headroom instead of dev->hard_header_len
  MAINTAINERS: update cxgb4 maintainer

Pull more clock framework updates from Mike Turquette:
 "This contains the second half the of the clk changes for 3.16.

  They are simply fixes and code refactoring for the OMAP clock drivers.
  The sunxi clock driver changes include splitting out the one
  mega-driver into several smaller pieces and adding support for the A31
  SoC clocks"

* tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
  clk: sunxi: document PRCM clock compatible strings
  clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
  clk: sun6i: Protect SDRAM gating bit
  clk: sun6i: Protect CPU clock
  clk: sunxi: Rework clock protection code
  clk: sunxi: Move the GMAC clock to a file of its own
  clk: sunxi: Move the 24M oscillator to a file of its own
  clk: sunxi: Remove calls to clk_put
  clk: sunxi: document new A31 USB clock compatible
  clk: sunxi: Implement A31 USB clock
  ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
  CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
  ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
  CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
  CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
  dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
  ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
  CLK: TI: gate: add composite interface clock to OMAP2 only build
  ARM: OMAP2: clock: add DT boot support for cpufreq_ck
  CLK: TI: OMAP2: add clock init support
  ...