Remove legacy code no longer used by anything.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We were copying our last cipher block into the request for use as IV for
all modes of operations. Fix this by discerning the behaviour based on
the mode of operation used: copy ciphertext for CBC, update counter for
CTR.

CC: stable@vger.kernel.org
Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
Reported by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The testmgr hash tests were testing init, digest, update and final
methods but not the finup method. Add a test for this one too.

While doing this, make sure we only run the partial tests once with
the digest tests and skip them with the final and finup tests since
they are the same.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

finup() operation was incorrect, padding was missing.
Fix by setting the ccree HW to enable padding.
Signed-off-by: NHadar Gat <hadar.gat@arm.com>
[ gilad@benyossef.com: refactored for better code sharing ]
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also
specifying the type flags for $FOO, e.g. crypto_alloc_shash() with
CRYPTO_ALG_TYPE_SHASH.  But, that's redundant since the crypto API will
override any specified type flag/mask with the correct ones.

So, remove the unneeded flags.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER.  But
this is redundant with the C structure type ('struct skcipher_alg'), and
crypto_register_skcipher() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the skcipher algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some aead algorithms set .cra_flags = CRYPTO_ALG_TYPE_AEAD.  But this is
redundant with the C structure type ('struct aead_alg'), and
crypto_register_aead() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the aead algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some ahash algorithms set .cra_type = &crypto_ahash_type.  But this is
redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the .cra_type automatically.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH.  But this
is redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Acked-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH.  But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

With all the crypto modules enabled on x86, and with a CPU that supports
AVX-2 but not SHA-NI instructions (e.g. Haswell, Broadwell, Skylake),
the "multibuffer" implementations of SHA-1, SHA-256, and SHA-512 are the
highest priority.  However, these implementations only perform well when
many hash requests are being submitted concurrently, filling all 8 AVX-2
lanes.  Otherwise, they are incredibly slow, as they waste time waiting
for more requests to arrive before proceeding to execute each request.

For example, here are the speeds I see hashing 4096-byte buffers with a
single thread on a Haswell-based processor:

            generic            avx2          mb (multibuffer)
            -------            --------      ----------------
sha1        602 MB/s           997 MB/s      0.61 MB/s
sha256      228 MB/s           412 MB/s      0.61 MB/s
sha512      312 MB/s           559 MB/s      0.61 MB/s

So, the multibuffer implementation is 500 to 1000 times slower than the
other implementations.  Note that with smaller buffers or more update()s
per digest, the difference would be even greater.

I believe the vast majority of people are in the boat where the
multibuffer code is much slower, and only a small minority are doing the
highly parallel, hashing-intensive, latency-flexible workloads (maybe
IPsec on servers?) where the multibuffer code may be beneficial.  Yet,
people often aren't familiar with all the crypto config options and so
the multibuffer code may inadvertently be built into the kernel.

Also the multibuffer code apparently hasn't been very well tested,
seeing as it was sometimes computing the wrong SHA-256 digest.

So, let's make the multibuffer algorithms low priority.  Users who want
to use them can either request them explicitly by driver name, or use
NETLINK_CRYPTO (crypto_user) to increase their priority at runtime.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha512-generic and sha384-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-512 or SHA-384 implementation, as
is desired for sha512_mb which is only useful under certain workloads
and is otherwise extremely slow.  Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha256-generic and sha224-generic had a cra_priority of 0, so it wasn't
possible to have a lower priority SHA-256 or SHA-224 implementation, as
is desired for sha256_mb which is only useful under certain workloads
and is otherwise extremely slow.  Change them to priority 100, which is
the priority used for many of the other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sha1-generic had a cra_priority of 0, so it wasn't possible to have a
lower priority SHA-1 implementation, as is desired for sha1_mb which is
only useful under certain workloads and is otherwise extremely slow.
Change it to priority 100, which is the priority used for many of the
other generic algorithms.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

"arch/x86/crypto/sha*-mb" needs a trailing slash, since it refers to
directories.  Otherwise get_maintainer.pl doesn't find the entry.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There is a copy-paste error where sha256_mb_mgr_get_comp_job_avx2()
copies the SHA-256 digest state from sha256_mb_mgr::args::digest to
job_sha256::result_digest.  Consequently, the sha256_mb algorithm
sometimes calculates the wrong digest.  Fix it.

Reproducer using AF_ALG:

    #include <assert.h>
    #include <linux/if_alg.h>
    #include <stdio.h>
    #include <string.h>
    #include <sys/socket.h>
    #include <unistd.h>

    static const __u8 expected[32] =
        "\xad\x7f\xac\xb2\x58\x6f\xc6\xe9\x66\xc0\x04\xd7\xd1\xd1\x6b\x02"
        "\x4f\x58\x05\xff\x7c\xb4\x7c\x7a\x85\xda\xbd\x8b\x48\x89\x2c\xa7";

    int main()
    {
        int fd;
        struct sockaddr_alg addr = {
            .salg_type = "hash",
            .salg_name = "sha256_mb",
        };
        __u8 data[4096] = { 0 };
        __u8 digest[32];
        int ret;
        int i;

        fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
        bind(fd, (void *)&addr, sizeof(addr));
        fork();
        fd = accept(fd, 0, 0);
        do {
            ret = write(fd, data, 4096);
            assert(ret == 4096);
            ret = read(fd, digest, 32);
            assert(ret == 32);
        } while (memcmp(digest, expected, 32) == 0);

        printf("wrong digest: ");
        for (i = 0; i < 32; i++)
            printf("%02x", digest[i]);
        printf("\n");
    }

Output was:

    wrong digest: ad7facb2000000000000000000000000ffffffef7cb47c7a85dabd8b48892ca7

Fixes: 172b1d6b ("crypto: sha256-mb - fix ctx pointer and digest copy")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch main goal is to improve driver performance by moving the
crypto request from a list to a RDR ring shadow.

This is possible since there is one producer and one consume for this
RDR request shadow and one ring descriptor is left unused.
Doing this change eliminates the use of spinlock when accessing the
descriptor ring and the need to dynamicaly allocate memory per crypto
request.

The crypto request is placed in the first RDR shadow descriptor only
if there are enough descriptors, when the result handler is invoked,
it fetches the first result descriptor from RDR shadow.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two new algorithms in the Inside Secure
SafeXcel cryptographic engine driver: ecb(des3_ede) and cbc(des3_ede).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two algorithms in the Inside Secure SafeXcel
cryptographic engine driver: ecb(des) and cbc(des).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the hmac(md5) algorithm in the Inside Secure
SafeXcel cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the MD5 algorithm support to the Inside Secure SafeXcel
cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ORO bridge (connected to the EIP197 write channel) does not
generate back pressure towards the EIP197 when its internal FIFO is
full. It assumes that the EIP will not drive more write transactions
than the maximal supported outstanding (32).

Hence tx_max_cmd_queue must be configured to 5 (or less).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds extra steps in the module removal path, to reset the
command and result rings. The corresponding interrupts are cleared, and
the ring address configuration is reset.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: small reworks, commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the TRC configuration so that the version of the
EIP197 engine being used is taken into account, as the configuration
differs between the EIP197B and the EIP197D.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch documents the new compatible used for the eip197d engine, as
this new engine is now supported by the Inside Secure SafeXcel
cryptographic driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the eip197d engine to the Inside Secure
SafeXcel cryptographic driver. This new engine is similar to the eip197b
and reuse most of its code.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

So far a single processing engine (PE) was configured and used in the
Inside Secure SafeXcel cryptographic engine driver. Some versions have
more than a single PE. This patch rework the driver's initialization to
take this into account and to allow configuring more than one PE.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: some reworks and commit message.]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Inside Secure SafeXcel driver currently uses 4 rings, but the
eip197d engines has 8 of them. This patch updates the driver so that
rings are allocated dynamically based on the number of available rings
supported by a given engine.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a flags field in the private structure, and a first flag for engines
needing context invalidation (currently only the eip197b). The
invalidation is needed when the engine includes a TRC cache, which will
also be true for the upcoming addition of the eip197d engine.
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

EIP engines do not support the same set of algorithms. So far the
supported engines in the Inside Secure SafeXcel driver support the same
set of algorithms, but that won't be true for all engines. This patch
adds an 'engines' field in the algorithm definitions so that they only
are registered when using a compatible cryptographic engine.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The compatibles were updated in the Inside Secure SafeXcel cryptographic
driver, as the ones previously used were not specific enough. The old
compatibles are still supported by the driver for backward
compatibility.

This patch updates the documentation accordingly.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

At first we used two compatibles in the SafeXcel driver, named after the
engine revision: eip97 and eip197. However this family of engines has
more precise versions and in fact we're supporting the eip97ies and
eip197b. More versions will be supported in the future, such as the
eip197d, and we'll need to differentiate them.

This patch fixes the compatibles used in the driver, to now use precise
ones. The two historical compatibles are kept for backward
compatibility.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves the firmware loaded by the Inside Secure SafeXcel
driver from /lib/firmware/ to /lib/firmware/inside-secure/eip197b/. This
prepares the driver for future patches which will support other
revisions of the EIP197 crypto engine as they'll have their own
firmwares.

To keep the compatibility of what was done, the old path is still
supported as a fallback for the EIP197b (currently the only one
supported by the driver that loads a firmware).
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

According to SP800-56A section 5.6.2.1, the public key to be processed
for the DH operation shall be checked for appropriateness. The check
shall covers the full verification test in case the domain parameter Q
is provided as defined in SP800-56A section 5.6.2.3.1. If Q is not
provided, the partial check according to SP800-56A section 5.6.2.3.2 is
performed.

The full verification test requires the presence of the domain parameter
Q. Thus, the patch adds the support to handle Q. It is permissible to
not provide the Q value as part of the domain parameters. This implies
that the interface is still backwards-compatible where so far only P and
G are to be provided. However, if Q is provided, it is imported.

Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes. Testing without providing the Q domain
parameter has been performed to verify the interface has not changed.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adding pm and pm_runtime support to STM32 CRC.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adding pm and pm_runtime support to STM32 HASH.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Adding pm and pm_runtime support to STM32 CRYP.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As of GCC 9.0.0 the build is reporting warnings like:

    crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’:
    crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
      strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>",
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       sizeof(rblkcipher.geniv));
       ~~~~~~~~~~~~~~~~~~~~~~~~~

This means the strnycpy might create a non null terminated string.  Fix this by
explicitly performing '\0' termination.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: NStafford Horne <shorne@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

According to SP800-56A section 5.6.2.1, the public key to be processed
for the ECDH operation shall be checked for appropriateness. When the
public key is considered to be an ephemeral key, the partial validation
test as defined in SP800-56A section 5.6.2.3.4 can be applied.

The partial verification test requires the presence of the field
elements of a and b. For the implemented NIST curves, b is defined in
FIPS 186-4 appendix D.1.2. The element a is implicitly given with the
Weierstrass equation given in D.1.2 where a = p - 3.

Without the test, the NIST ACVP testing fails. After adding this check,
the NIST ACVP testing passes.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The function skcipher_walk_next declared as static and marked as
EXPORT_SYMBOL_GPL. It's a bit confusing for internal function to be
exported. The area of visibility for such function is its .c file
and all other modules. Other *.c files of the same module can't use it,
despite all other modules can. Relying on the fact that this is the
internal function and it's not a crucial part of the API, the patch
just removes the EXPORT_SYMBOL_GPL marking of skcipher_walk_next.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <efremov@linux.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>