Signed-off-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.

So lets just drop this as it is no longer used.
Suggested-by: NUlf Magnusson <ulfalizer@gmail.com>
Suggested-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The mconf (or its infrastructure, lxdiaglog) depends on the ncurses.
Move and rename check-lxdialog.sh to mconf-cfg.sh to make it work in
the same way as for qconf and gconf.

This commit fixes some more weirdnesses.

The nconf also needs ncurses packages.  HOSTLOADLIBES_nconf is set
to the libraries needed for nconf, but the cflags is not explicitly
set.  Actually, nconf relies on the check-lxdialog.sh for the proper
cflags:

HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
                    -DLOCALE

The code above passes the ncurses flags to all objects, even for conf,
qconf, gconf.  Let's pass the ncurses flags only to mconf and nconf.

Currently, the presence of ncurses is not checked for nconf.  Let's
show a prompt like the mconf case.

According to Randy's report, the shell scripts still need to carry
the fallback code in case the pkg-config fails to find the ncurses
packages.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>

Refactor the package checks for gconf in the same way as for qconf.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>

Currently, the necessary package checks for building qconf is
surrounded by ifeq ($(MAKECMDGOALS),xconfig) ... endif.
Then, Make will restart when .tmp_qtcheck is generated.

To simplify the Makefile, move the scripting to a separate file,
and use filechk.  The shell script is executed everytime xconfig
is run, but it is not a costly script.

In the old code, 'pkg-config --exists' only checked Qt5Core / QtCore,
but the set of necessary packages should be checked.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>

Files generated by if_changed* must be added to 'targets' to include
*.cmd files.  Otherwise, they would be regenerated every time.

The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files.  So, each Makefile needs to add them by itself.

There are some common cases where objects are generated by chained
rules.  Lexers and parsers are compiled like follows:

   %.lex.o <- %.lex.c <- %.l
   %.tab.o <- %.tab.c <- %.y

They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.

At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately.  It should be deleted after
Kconfig is more refactored.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NFrank Rowand <frowand.list@gmail.com>

Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively.  Clean them up globally from the top Makefile.

Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded.  They can be cleaned away by 'make clean' instead of
'make mrproper'.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NFrank Rowand <frowand.list@gmail.com>

Many parts in Kconfig are so cryptic and need refactoring.  However,
its complexity prevents us from moving forward.  There are several
naive corner cases where it is difficult to notice breakage.  If
those are covered by unit tests, we will be able to touch the code
with more confidence.

Here is a simple test framework based on pytest.  The conftest.py
provides a fixture useful to run commands such as 'oldaskconfig' etc.
and to compare the resulted .config, stdout, stderr with expectations.

How to add test cases?
----------------------

For each test case, you should create a subdirectory under
scripts/kconfig/tests/ (so test cases are separated from each other).
Every test case directory should contain the following files:

 - __init__.py: describes test functions
 - Kconfig: the top level Kconfig file for the test

To do a useful job, test cases generally need additional data like
input .config and information about expected results.

How to run tests?
-----------------

You need python3 and pytest.  Then, run "make testconfig".  O= option
is supported.  If V=1 is given, detailed logs captured during tests
are displayed.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

The local{yes,mod}config targets currently have streamline_config.pl as
a prerequisite. This is redundant, because streamline_config.pl is a
checked-in file with no prerequisites.

Remove the prerequisite and reference streamline_config.pl directly in
the recipe of the rule instead.
Signed-off-by: NUlf Magnusson <ulfalizer@gmail.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

As commit cedd55d4 ("kconfig: Remove silentoldconfig from help
and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a
historical misnomer.  That commit removed it from help and docs since
it is an internal interface.  If so, it should be allowed to rename
it to something more intuitive.  'syncconfig' is the one I came up
with because it updates the .config if necessary, then synchronize
include/generated/autoconf.h and include/config/* with it.

You should not manually invoke 'silentoldcofig'.  Display warning if
used in case existing scripts are doing wrong.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

The purpose of local{yes,mod}config is to arrange the .config file
based on actually loaded modules.  It is unnecessary to update
include/generated/autoconf.h and include/config/* stuff here.
They will be updated as needed during the build.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

Commit d3fc425e ("kbuild: make sure autoksyms.h exists early")
moved the code that touches autoksyms.h to scripts/kconfig/Makefile
with obscure reason.

From Nicolas' comment [1], he did not seem to be sure about the root
cause.

I guess I figured it out, so here is a fix-up I think is more correct.
According to the error log in the original post [2], the build failed
in scripts/mod/devicetable-offsets.c

scripts/mod/Makefile is descended from scripts/Makefile, which is
invoked from the top-level Makefile by the 'scripts' target.

To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs).
This depends on 'prepare' and 'scripts' as follows:

  $(vmlinux-dirs): prepare scripts

Because there is no dependency between 'prepare' and 'scripts', the
parallel building can execute them simultaneously.

'prepare' depends on 'prepare1', which touched autoksyms.h, while
'scripts' descends into script/, then scripts/mod/, which needs
<generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS.  It was the
reason of the race.

I am not happy to have unrelated code in the Kconfig Makefile, so
getting it back to the top Makefile.

I removed the standalone test target because I want to use it to
create an empty autoksyms.h file.  Here is a little improvement;
unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS
is disabled.

[1] https://lkml.org/lkml/2016/11/30/734
[2] https://lkml.org/lkml/2016/11/30/531Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NNicolas Pitre <nico@linaro.org>

As explained by Michal Marek at https://lkml.org/lkml/2011/8/31/189
silentoldconfig has become a misnomer. It has become an internal interface
so remove it from "make help" and Documentation/ to stop confusing people
using it as seen for instance at
https://chromium-review.googlesource.com/835632 Don't remove it from
kconfig/Makefile yet not to break any (other) tool using it.

On the other hand, correct and expand its description in the help of
the (internal) scripts/kconfig/conf.c
Signed-off-by: NMarc Herbert <marc.herbert@intel.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The 'oldnoconfig' is really confusing due to its counter-intuitive name.
It was renamed by commit fb16d891 ("kconfig: replace 'oldnoconfig'
with 'olddefconfig', and keep the old name as an alias").

The 'oldnoconfig' has been kept as an alias for enough period of time,
and finally I am planning to remove it.  I will give people a little
more time for migration.  Meanwhile, the following message will be
displayed if oldnoconfig is used.

    WARNING: "oldnoconfig" target will be removed after Linux 4.19
              Please use "olddefconfig" instead, which is an alias.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

The C-based config programs are properly guarded from a missing (or,
currently, external) libintl.h by the HOST_EXTRACFLAGS check, but
this does not help the C++-based qconf.
Signed-off-by: NYaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Flex and Bison provide an option to change the prefix of globally-
visible symbols.  This is useful to link multiple lexers and/or
parsers into the same executable.  However, Kconfig (and any other
host programs in kernel) uses a single lexer and parser.  I do not
see a good reason to change the default 'yy' prefix.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NUlf Magnusson <ulfalizer@gmail.com>

zconf.lex.c is generated by flex, zconf.tab.c by bison.  Instead of
running flex and bison during the kernel building, we conventionally
version-control those artifacts with _shipped suffix.

It is tedious to manually regenerate them every time we change the
real sources, zconf.l and zconf.y.

Remove the _shipped files and switch over to build-time generation
of the intermediate C files.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It turns out that gperf-3.1 changed types in the generated code in ways
that aren't even trivially detectable without having to generate a test-file.

It's just not worth using tools and libraries from clowns that don't
understand or care about compatibility.  So get rid of gperf.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a check and a nice user-friendly message when the curses
library is not present on the system and the user wants to do "make
menuconfig". It doesn't get issued, though. Instead, we fail the build
when mconf.c doesn't find the curses.h header:

    HOSTCC  scripts/kconfig/mconf.o
  In file included from scripts/kconfig/mconf.c:23:0:
  scripts/kconfig/lxdialog/dialog.h:38:20: fatal error: curses.h: No such file or directory
   #include CURSES_LOC
                      ^
  compilation terminated.

Make that check a prerequisite to mconf so that the user sees the error
message instead:

  $ make menuconfig
   *** Unable to find the ncurses libraries or the
   *** required header files.
   *** 'make menuconfig' requires the ncurses libraries.
   ***
   *** Install ncurses (ncurses-devel) and try again.
   ***
  scripts/kconfig/Makefile:203: recipe for target 'scripts/kconfig/dochecklxdialog' failed
  make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
  Makefile:548: recipe for target 'menuconfig' failed
  make: *** [menuconfig] Error 2
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created.  Let's create it at the same time as
the directory holding it is created.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/Changes still lists this as the minimal required version,
so it ought to remain usable for the time being.

Fixes: d2036f30 ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMichal Marek <mmarek@suse.com>

The Qt Project recommendation is that there should always be a "qmake"
binary and it should never be renamed. If it's necessary to handle
multiple Qt versions, the Qt Project recommends using qtchooser.

Unfortunately, some distros do not follow the recommendation, so we
would need to check qmake-qt4, qmake-qt5, etc. So, instead, let's try
pkg-config.
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Reported-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

My recent commit d2036f30 ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.

This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.

The fix is simple, we need to look for the file under $(srctree).

Fixes: d2036f30 ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: NOlof Johansson <olof@lixom.net>
Acked-by: NMichal Marek <mmarek@suse.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).

For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

Signed-off-by: NBoris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: NThiago Macieira <thiago.macieira@intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.com>

Arch Makefiles can set KBUILD_DEFCONFIG to tell kbuild the name of the
defconfig that should be built by default.

However currently there is an assumption that KBUILD_DEFCONFIG points to
a file at arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).

We would like to use a target, using merge_config, as our defconfig, so
adapt the logic in scripts/kconfig/Makefile to allow that.

To minimise the chance of breaking anything, we first check if
KBUILD_DEFCONFIG is a file, and if so we do the old logic. If it's not a
file, then we call the top-level Makefile with KBUILD_DEFCONFIG as the
target.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NMichal Marek <mmarek@suse.com>

This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:

   make xenconfig

You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.

A few generic notes: we enable both of these:

CONFIG_INET=y
CONFIG_BINFMT_ELF=y

although technically not required given you likely will
end up with a pretty useless system otherwise.

A few architectural differences worth noting:

$ make allnoconfig; make xenconfig > /dev/null ; \
	grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
	grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
	grep XEN .config > arm64-config

Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.

Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NJulien Grall <julien.grall@linaro.org>
Acked-by: NMichal Marek <mmarek@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

We'll be adding options for xen as well.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Use a single rule for targets handled directly by the conf program.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".

This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".

Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Kbuild always runs in $(objtree).  Actually, $(objtree) is always
set to "." by the top-level Makefile.

We can omit "-O $(objtree)" and "$(objtree)/".
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Currently, "make tinyconfig" does not work with "-j" option.

  $ make mrproper
  $ make -j8 tinyconfig
    HOSTCC  scripts/basic/fixdep
    HOSTCC  scripts/kconfig/conf.o
    SHIPPED scripts/kconfig/zconf.tab.c
    SHIPPED scripts/kconfig/zconf.lex.c
    SHIPPED scripts/kconfig/zconf.hash.c
    HOSTCC  scripts/kconfig/zconf.tab.o
    HOSTLD  scripts/kconfig/conf
  scripts/kconfig/conf --allnoconfig Kconfig
  #
  # configuration written to .config
  #
  scripts/kconfig/Makefile:122: *** You need an existing .config
  for this target.  Stop.
  make: *** [tinyconfig] Error 2

As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.

We can fix this issue by moving the error check to the shell script.

Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file.  It is reasonable to check its existence in
the shell script.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1.  Add `+' to parent make rule.",
is displayed.

  $ make -s defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  $ make -j8 kvmconfig
  Using ./.config as base
  Merging ./arch/x86/configs/kvm_guest.config
    [ snip ]
  #
  # merged configuration written to ./.config (needs make)
  #
  make[2]: warning: jobserver unavailable: using -j1.  Add `+' to
  parent make rule.
  scripts/kconfig/conf --oldconfig Kconfig
    [ snip ]
  #
  # configuration written to .config
  #
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Reviewed-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Currently, Kconfig descriptions that use multi-byte UTF-8 characters
(such as MTD_NAND_CAFE) will have their menu entries dropped from the
'make nconfig' ncurses menu, and all subsequent entries in the same
window will be omitted. This seems to be due to the ncurses 'menu'
library, which does not traditionally handle UTF-8 >8-bit characters
properly.

The ncursesw library ('w' is for "wide") is written to handle these
UTF-8 characters, and is practically a drop-in replacement at the source
level. Use it by default, if available.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=43067Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Walch <walch.martin@web.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>