- 10 11月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
Only cpu seeing dst refcount going to 0 can safely dereference dst->flags. Otherwise an other cpu might already have freed the dst. Fixes: 27b75c95 ("net: avoid RCU for NOCACHE dst") Reported-by: NGreg Thelen <gthelen@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 11月, 2015 4 次提交
-
-
由 Eric Dumazet 提交于
SYNACK packets might be attached to request sockets. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
SYNACK packets might be attached to request sockets. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
SYNACK packets might be attached to request sockets. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
SYNACK packets might be attached to a request socket, xt_owner wants to gte the listener in this case. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2015 4 次提交
-
-
由 Eric Dumazet 提交于
I mistakenly took wrong request sock pointer when calling tcp_move_syn() @req_unhash is either a copy of @req, or a NULL value for FastOpen connexions (as we do not expect to unhash the temporary request sock from ehash table) Fixes: 805c4bc0 ("tcp: fix req->saved_syn race") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ying Cai <ycai@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Ruggeri 提交于
There is a race conditions between packet_notifier and packet_bind{_spkt}. It happens if packet_notifier(NETDEV_UNREGISTER) executes between the time packet_bind{_spkt} takes a reference on the new netdevice and the time packet_do_bind sets po->ifindex. In this case the notification can be missed. If this happens during a dev_change_net_namespace this can result in the netdevice to be moved to the new namespace while the packet_sock in the old namespace still holds a reference on it. When the netdevice is later deleted in the new namespace the deletion hangs since the packet_sock is not found in the new namespace' &net->packet.sklist. It can be reproduced with the script below. This patch makes packet_do_bind check again for the presence of the netdevice in the packet_sock's namespace after the synchronize_net in unregister_prot_hook. More in general it also uses the rcu lock for the duration of the bind to stop dev_change_net_namespace/rollback_registered_many from going past the synchronize_net following unlist_netdevice, so that no NETDEV_UNREGISTER notifications can happen on the new netdevice while the bind is executing. In order to do this some code from packet_bind{_spkt} is consolidated into packet_do_dev. import socket, os, time, sys proto=7 realDev='em1' vlanId=400 if len(sys.argv) > 1: vlanId=int(sys.argv[1]) dev='vlan%d' % vlanId os.system('taskset -p 0x10 %d' % os.getpid()) s = socket.socket(socket.PF_PACKET, socket.SOCK_RAW, proto) os.system('ip link add link %s name %s type vlan id %d' % (realDev, dev, vlanId)) os.system('ip netns add dummy') pid=os.fork() if pid == 0: # dev should be moved while packet_do_bind is in synchronize net os.system('taskset -p 0x20000 %d' % os.getpid()) os.system('ip link set %s netns dummy' % dev) os.system('ip netns exec dummy ip link del %s' % dev) s.close() sys.exit(0) time.sleep(.004) try: s.bind(('%s' % dev, proto+1)) except: print 'Could not bind socket' s.close() os.system('ip netns del dummy') sys.exit(0) os.waitpid(pid, 0) s.close() os.system('ip netns del dummy') sys.exit(0) Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Before converting a 'socket pointer' into inet socket, use sk_fullsock() to detect timewait or request sockets. Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Tested-by: NDmitry Vyukov <dvyukov@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
For the reasons explained in commit ce105008 ("tcp/dccp: fix ireq->pktopts race"), we need to make sure we do not access req->saved_syn unless we own the request sock. This fixes races for listeners using TCP_SAVE_SYN option. Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NYing Cai <ycai@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2015 10 次提交
-
-
由 Sabrina Dubroca 提交于
In ipv6_add_dev, when addrconf_sysctl_register fails, we do not clean up the dev_snmp6 entry that we have already registered for this device. Call snmp6_unregister_dev in this case. Fixes: a317a2f1 ("ipv6: fail early when creating netdev named all or default") Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hedberg 提交于
When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The 'dyn_end' value is also a valid CID so it should be included in the range of values checked. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The core spec defines specific response codes for situations when the received CID is incorrect. Add the defines for these and return them as appropriate from the LE Connect Request handler function. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The white list commands might not be implemented if the controller does not actually support the white list. So check the supported commands first before issuing these commands. Not supporting the white list is the same as supporting a white list with zero size. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Stefan Hajnoczi 提交于
When a listen socket enqueues a connection for userspace to accept(), the sk->sk_data_ready() callback should be invoked. In-kernel socket users rely on this callback to detect when incoming connections are available. Currently the sk->sk_state_change() callback is invoked by vmci_transport.c. This happens to work for userspace applications since sk->sk_state_change = sock_def_wakeup() and sk->sk_data_ready = sock_def_readable() both wake up the accept() waiter. In-kernel socket users, on the other hand, fail to detect incoming connections. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
With moving netdev_sync_lower_features() after the .ndo_set_features calls, I neglected to verify that devices added *after* a flag had been disabled on an upper device were properly added with that flag disabled as well. This currently happens, because we exit __netdev_update_features() when we see dev->features == features for the upper dev. We can retain the optimization of leaving without calling .ndo_set_features with a bit of tweaking and a goto here. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Reported-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
A bug report (https://bugzilla.kernel.org/show_bug.cgi?id=107071) noted that the follwoing ip command is failing with v4.3: $ ip route add 10.248.5.0/24 dev bond0.250 table vlan_250 src 10.248.5.154 RTNETLINK answers: Invalid argument 021dd3b8 changed the lookup of the given preferred source address to use the table id passed in, but this assumes the local entries are in the given table which is not necessarily true for non-VRF use cases. When validating the preferred source fallback to the local table on failure. Fixes: 021dd3b8 ("net: Add routes to the table associated with the device") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Sasha reported the following lockdep warning: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_INET); lock(rtnl_mutex); lock(sk_lock-AF_INET); lock(rtnl_mutex); This is due to that for IP_MSFILTER and MCAST_MSFILTER, we take rtnl lock before the socket lock in setsockopt() path, but take the socket lock before rtnl lock in getsockopt() path. All the rest optnames are setsockopt()-only. Fix this by aligning the getsockopt() path with the setsockopt() path, so that all mcast socket path would be locked in the same order. Note, IPv6 part is different where rtnl lock is not held. Fixes: 54ff9ef3 ("ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}") Reported-by: NSasha Levin <sasha.levin@oracle.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
This fixes the following lockdep warning: [ INFO: inconsistent lock state ] 4.3.0-rc7+ #1197 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. sysctl/1019 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&net->ipv4.ip_local_ports.lock)->seqcount){+.+-..}, at: [<ffffffff81921de7>] ipv4_local_port_range+0xb4/0x12a {IN-SOFTIRQ-R} state was registered at: [<ffffffff810bd682>] __lock_acquire+0x2f6/0xdf0 [<ffffffff810be6d5>] lock_acquire+0x11c/0x1a4 [<ffffffff818e599c>] inet_get_local_port_range+0x4e/0xae [<ffffffff8166e8e3>] udp_flow_src_port.constprop.40+0x23/0x116 [<ffffffff81671cb9>] vxlan_xmit_one+0x219/0xa6a [<ffffffff81672f75>] vxlan_xmit+0xa6b/0xaa5 [<ffffffff817f2deb>] dev_hard_start_xmit+0x2ae/0x465 [<ffffffff817f35ed>] __dev_queue_xmit+0x531/0x633 [<ffffffff817f3702>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff818004a5>] neigh_resolve_output+0x12f/0x14d [<ffffffff81959cfa>] ip6_finish_output2+0x344/0x39f [<ffffffff8195bf58>] ip6_finish_output+0x88/0x8e [<ffffffff8195bfef>] ip6_output+0x91/0xe5 [<ffffffff819792ae>] dst_output_sk+0x47/0x4c [<ffffffff81979392>] NF_HOOK_THRESH.constprop.30+0x38/0x82 [<ffffffff8197981e>] mld_sendpack+0x189/0x266 [<ffffffff8197b28b>] mld_ifc_timer_expire+0x1ef/0x223 [<ffffffff810de581>] call_timer_fn+0xfb/0x28c [<ffffffff810ded1e>] run_timer_softirq+0x1c7/0x1f1 Fixes: b8f1a556 ("udp: Add function to make source port for UDP tunnels") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2015 6 次提交
-
-
由 Jiri Pirko 提交于
Caller passing down the SKIP_EOPNOTSUPP switchdev flag expects that -EOPNOTSUPP cannot be returned. But in case of direct op call without recurtion, this may happen. So fix this by checking it always on the end of __switchdev_port_attr_set function. Fixes: 464314ea ("switchdev: skip over ports returning -EOPNOTSUPP when recursing ports") Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Sutter 提交于
It looks like this has never been used at all. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Markus Elfring 提交于
The irlmp_unregister_service() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: netdev@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
NIC drivers mark device as detached during error recovery. It expects no manangement hooks to be invoked in this state. Invoke driver vlan hooks only if device is present. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Sørensen 提交于
Change the definition of PTP_CLASS_L2 to not have any bits overlapping with the other defined protocol values, allowing the PTP_CLASS_* definitions to be for simple filtering on packet type. Signed-off-by: NStefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 11月, 2015 15 次提交
-
-
由 Michal Kubeček 提交于
Both tunnel6_protocol and tunnel46_protocol share the same error handler, tunnel6_err(), which traverses through tunnel6_handlers list. For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g. in tunnel46_rcv(). Current code can generate an ICMPv6 error message with an IPv4 packet embedded in it. Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register") Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ayala Beker 提交于
Currently, cfg80211 rejects updates of AID and listen interval parameters for existing entries. This information is known only at association stage and as a result it's impossible to update entries that were added unassociated. Fix this by allowing updates of these properies for stations that the driver (or mac80211) assigned unassociated state. This then fixes mac80211's use of NL80211_FEATURE_FULL_AP_CLIENT_STATE. Signed-off-by: NAyala Beker <ayala.beker@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chaitanya T K 提交于
Channel context driver operations can sleep, so add might_sleep() and document this. Signed-off-by: NChaitanya T K <chaitanya.mgit@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Allow distinguishing the non-station case from the case of a station without rates, by using -1 for the non-station case. This value cannot be reached with a station since that many legacy rates don't exist. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
As WMM is required for HT/VHT operation, treat bad WMM parameters more gracefully by falling back to default parameters instead of not using WMM assocation. This makes it possible to still use HT or VHT, although potentially with reduced quality of service due to unintended WMM parameters. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
Disabling WMM has a huge impact these days. It implies that HT and VHT will be disabled which means that the throughput will be drammatically reduced. Since the AIFSN is a transmission parameter, we can play a bit and fix it up to make it compliant with the 802.11 specification which requires it to be at least 2. Increasing it from 1 to 2 will slightly reduce the likelyhood to get a transmission opportunity compared to other clients that would accept to set AIFSN=1, but at least it will allow HT and VHT which is a huge gain. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The function currently determines this value, for use in bss_info.qos, based on the interface type itself. Make it a parameter instead and set it with the same logic for now. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Matthias Schiffer 提交于
llid_in_use needs to be limited to stations of the same VIF, otherwise it will cause a NULL deref as the sta_info of non-mesh-VIFs don't have sta->mesh set. Steps to reproduce: modprobe mac80211_hwsim channels=2 iw phy phy0 interface add ibss0 type ibss iw phy phy0 interface add mesh0 type mp iw phy phy1 interface add ibss1 type ibss iw phy phy1 interface add mesh1 type mp ip link set ibss0 up ip link set mesh0 up ip link set ibss1 up ip link set mesh1 up iw dev ibss0 ibss join foo 2412 iw dev ibss1 ibss join foo 2412 # Ensure that ibss0 and ibss1 are actually associated; I often need to # leave and join the cell on ibss1 a second time. iw dev mesh0 mesh join bar iw dev mesh1 mesh join bar # crash Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
When 11n peers performs a TDLS connection on a legacy BSS, the HT operation IE must be specified according to IEEE802.11-2012 section 9.23.3.2. Otherwise HT-protection is compromised and the medium becomes noisy for both the TDLS and the BSS links. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Scheduled scan has to be reconfigured only if wowlan wasn't configured, since otherwise it should continue to run (with the 'any' trigger) or be aborted. The current code will end up asking the driver to start a new scheduled scan without stopping the previous one, and leaking some memory (from the previous request.) Fix this by doing the abort/restart under the proper conditions. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
If drv_start() fails during hw_restart, all the running interfaces are being closed/stopped, which results in drv_stop() being called, although the driver was never started successfully. This might cause drivers to perform operations on uninitialized memory (as they assume it was initialized on drv_start) Consider the local->started flag, and call the driver's stop() op only if drv_start() succeeded before. Move drv_start() and drv_stop() to driver-ops.c, as they are no longer simple wrappers. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
The recalc_smps work can run after the station disassociates. At this stage we already released the channel, but the work will be cancelled only when the interface stops. In this scenario we can hit the warning in ieee80211_recalc_smps, so just remove it. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Requesting hw restart during suspend might result in the restart work being executed after mac80211 and the hw are suspended. Solve the race by simply scheduling the restart work on a freezable workqueue. Note that there can be some cases of reconfiguration on resume (besides the hardware restart): * wowlan is not configured - All the interfaces removed were removed on suspend, and drv_stop() was called. At this point the driver shouldn't expect for hw_restart anyway, so we can simply cancel it (on resume). * wowlan is configured, drv_resume() == 1 There is no definitive expected behavior in this case, as each driver might have different expectations (e.g. setting some flags on suspend/restart vs. not handling spurious recovery). For now, simply let the hw_restart work run again after resume, and hope the driver will handle it well (or at least initiate another hw restart). Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Andrei Otcheretianski 提交于
Local request to deauthenticate wasn't handled while associating, thus the association could continue even when the user space required to disconnect. Cc: stable@vger.kernel.org Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
In TDLS channel-switch operations the chandef can sometimes be NULL. Avoid an oops in the trace code for these cases and just print a chandef full of zeros. Cc: stable@vger.kernel.org Fixes: a7a6bdd0 ("mac80211: introduce TDLS channel switch ops") Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-