- 13 7月, 2007 40 次提交
-
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Paul Schroeder <pschroeder@uplogix.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: VijayaKumar G.N. <vijaykumar@aspirecom.net> Cc: AjayKumar <ajay@aspirecom.net> Cc: Gurudeva N. <gurudev@aspirecom.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Wolfgang Grandegger <wolfgang@ces.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Thomas Wahrenbruch <linuxusb@kobil.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Utz-Uwe Haus <haus@uuhaus.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Gary Brubaker <xavyer@ix.netcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Roelf Diedericks <roelfd@inet.co.za> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Ganesh Varadarajan <ganesh@veritas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Peter Berger <pberger@brimson.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Peter Berger <pberger@brimson.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Hermann Kneissel <herkne@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Kuba Ober <kuba@mareimbrium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Gary Brubaker <xavyer@ix.netcom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <borchers@steinerpoint.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Neil Whelchel <koyama@firstlight.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Cc: <support@reiner-sct.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This done in anticipation of removal of urb->status, which will make that patch easier to review and apply in the future. Cc: <linux-usb-devel@lists.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Also update the copyright date on the pl2303 driver, as it was out of date. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
This patch releases DMA resources if enqueue fails in the HCD. Linux had this bug ever since we converted from virt_to_bus for 2.4. It is difficult to hit. A user would need a significant memory pressure or some other unusual condition. It was reported to me by IBM. They ran a management application for RSA II adapters which sent Bulk requests to an Interrupt endpoint. Submissions got rejected by HCD due to an invalid interval value and the swiotlb pool became depleted in the matter of hours. We fixed the invalid interval issue in devio.c separately, but this seems to be a bug worth fixing as well. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
A noticeable number of low-speed devices mistakenly include descriptors for Bulk endpoints, which is forbidden by the USB spec. In an attempt to make such devices more usable, this patch (as924) converts the descriptors to Interrupt with an interval of 1 ms. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benny Halevy 提交于
I think there is a race between usb_serial_put() and usb_serial_get_by_index() (and get_free_serial()) with regards to handling the serial port refcount. usb_serial_get_by_index() gets a reference on the serial port under table_lock while return_serial releases all the returned ports from the table under the same lock. However, the table_lock is not taken around the call to kref_put, theoretically allowing to sneak in and grab a reference after kref_put has already determined that the reference count is zero (and before calling destroy_serial) causing use after free. Signed-off-by: NBenny Halevy <bhalevy@ns1.bhalevy.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this fixes the sleep found with the automatic tool. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Christian Engelmayer 提交于
According to the USB Specification Revision 2.0 chapter 11.12.5 a hub experiencing an over-current condition must place all affected ports in the powered-off state. It seems that some root hubs need port power to be cycled by software in order to get back to normal functionality after an over-current condition ... like the EHCI implementation on an MPC8343E. Signed-off-by: NChristian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Platforms with PCMCIA support can implement host-side USB with "sl811_cs", so make sure this menu shows up on platforms with PCMCIA. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as923) makes usb-storage's control thread use kthread_should_stop()/kthread_stop(). The scanning thread can't be similarly converted until the core kthread implementation allows threads to call do_exit(). The advantage of this change is that we can now be certain the control thread has terminated before storage_disconnect() returns. This will simplify the locking requirements when autosuspend support is added. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arnaud Patard 提交于
This patch adds the support for the Usb Device Controller on Samsung S3C24xx SoCs. This driver passes all tests from testusb (including #13) and has been tested on S3C2410, S3C24212, and S3C2440 SoCs. Whitespace updates, minor cleanups by David Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Cc: Herbert Pötzl <herbert@13thfloor.at> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Geoff Levand 提交于
USB HCD glue updates to reflect the new PS3 unifed device support. - Fixed remove() routine. - Added shutdown() routine. - Added request_mem_region() call. - Fixed MODULE_ALIAS(). - Made a proper fix for the hack done to support muti-platform in commit 48fda451. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Might fix bug 8561 On Mon, 4 Jun 2007, Paulo Pereira wrote: > The patch that you send is not resolving the problem... :( > I stil have Kernel panic after 45/60 min of work with Ktorrent/Amule... > > The Drump is: > > Call Trace: > [<c055fb36>] usb_hcd_submit+0xb1/0x763 > [<f9276488>] ipt_do_table+0x2c7/0x2ef [ip_tables] > [<f929a6d7>] nf_ct_deliver_cached_events+0x41/0x96 [nf_conntrak] > [<f9288254>] ipv4_confirm+0x36/0c3b [nf_conntrack_ipv4] > [<c05ce7c2>] tcp_v4_rcv+0x827/0x899 > [<c05afcc0>] nf_hook_slow+0x4d/0xb5 > [<c042826f>] irq_enter+0x19/0x23 > [<c042826f>] irq_enter+0x19/0x23 > [<c040794c>] do_IRQ+0xbd/0xd1 > [<f90893c9>] option_write+0xa7/0xef [option] Okay, from this it looks like there's a problem in the option.c serial driver. Glancing at the code, it's obvious why: The thing totally abuses the USB API. Try applying this patch; it should help. From: Alan Stern <stern@rowland.harvard.edu> Cc: Paulo Pereira <pfmp.404@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Li Yang 提交于
Currently the driver is expecting max ep number in platform data which isn't passing this information. This patch fix the problem by reading it from DCCPARAMS(Device Controller Capability Parameters) register. The change also need some reordering of the probe code. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as920) adds an extra level of protection to the USB-Persist facility. Now it will apply by default only to hubs; for all other devices the user must enable it explicitly by setting the power/persist device attribute. The disconnect_all_children() routine in hub.c has been removed and its code placed inline. This is the way it was originally as part of hub_pre_reset(); the revised usage in hub_reset_resume() is sufficiently different that the code can no longer be shared. Likewise, mark_children_for_reset() is now inline as part of hub_reset_resume(). The end result looks much cleaner than before. The sysfs interface is updated to add the new attribute file, and there are corresponding documentation updates. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as919) unifies the code paths used for normal resume and for reset-resume. Earlier I had failed to note a section in the USB spec which requires the host to resume a suspended port before resetting it if the attached device is enabled for remote wakeup. Since the port has to be resumed anyway, we might as well reuse the existing code. The main changes are: usb_reset_suspended_device() is eliminated. usb_root_hub_lost_power() is moved down next to the hub_reset_resume() routine, to which it is logically related. finish_port_resume() does a port reset() if the device's reset_resume flag is set. usb_port_resume() doesn't check whether the port is initially enabled if this is a USB-Persist sort of resume. Code to perform the port reset is added to the resume pathway for the non-CONFIG_USB_SUSPEND case. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-