I keep telling myself that those tables aren't great because their size
is the number of dwords we need to program and not the number of entries
(number of dwords = number of entries * 2).

And... I got it wrong when I refactored the code. Fortunately, it was
only wrong when the VBT table (or the code parsing it) is itself
erroneous. Long story short, it shouldn't matter, but still, there's a
potential array overflow and random programming of the DDI translation
tables.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Removing the check for HAS_PCH_SPLIT, it looks redundant here. Anyways all the
platforms are checked separately.

v2: Reordering as per the gen (Ville)
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently, if the machine is runtime suspended an you read the file,
you will get an "Unclaimed register" error message.

Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make the intel_{enable,disable}_primary_hw_plane() simply call
.update_primary_plane(), thus eliminating the rmw from these functions
which should help the poor old 830M.

Now we can also remove the .update_primary_plane() from the
.crtc_enable() hooks because we end up calling it via
intel_crtc_enable_planes()->intel_enable_primary_hw_plane().

This also has the nice benefit of making primary planes a bit closer to
the way we handle sprite planes during modesets.

v2: Just write 0 to DSPCNTR and DSPSURF/DSPADDR if the plane is (to be)
    disabled. Quicker, and more importantly avoids an oops when fb==NULL
    due to BIOS fb takeover failure.
    Pimp the commit message a bit (Matt)
v3: Drop useless primary_enabled checks when setting DISPLAY_PLANE_ENABLE
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the entire DSPCNTR register setup into the .update_primary_plane()
functions. That's where it belongs anyway and it'll also help 830M which
has the extra problem that plane registers reads will return the value
latched at the last vblank, not the value that was last written.

Also move DSPPOS and DSPSIZE setup there.

v2: Don't move variable initialization to avoid churn later
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

adj was defined as u8. The issue is last_adj can be negative and adj is
initialized with:

  adj = dev_priv->rps.last_adj;

and we were also happily doing things like:

  if (adj < 0)

(thank static analysers!)

v2: Make new_delay an int in case we overflow the u8 in the intermediate
    computations. new_delay will get clamped at the end anyway. (Ville)

Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Doing a 1s wait (tops) with the cpu is a bit excessive. Tune it down
like everything else in that code.

v2: Also insert the missing space Chris spotted.

Cc: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Program DDL register as part of sprite watermark programming for CHV and VLV.

v2: Rename DRAIN_LATENCY_MAX by DRAIN_LATENCY_MASK

v3: Addressed review comments by Ville
    - Changed Sprite DDL definitions to more generic to avoid multiple if-else
    - Changed bit masking to customary form
    - Changed to bitwise shorthand operator for sprite_dl assignment
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Round up clock computation and limit drain latency to maximum of 0x7F.
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Modify drain latency computation to use it for any plane. Same function can be
used for primary, cursor and sprite planes.

v2: Adressed review comments by Imre and Ville.
    - Moved clock round up in separate patch
    - Added WARN check for clock and pixel size
    - Simplified bit masking
    - Use cursor_base instead of reg read

v3: Changed to bitwise shorthand operator for plane_dl assignment.
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If there are pending page flips when the fd gets closed those page
flips may have events associated to them. When the page flip eventually
completes it will queue the event to file_priv->event_list, but that
may be too late and file_priv->event_list has already been cleaned up.
Thus we leak a bit of kernel memory in the form of the event structure.

To avoid such problems clear out such pending events from
intel_crtc->unpin_work at ->preclose(). Any event that already made it
to file_priv->event_list will get cleaned up by the drm_release_events()
a bit later.

We can ignore the file_priv->event_space accounting since file_priv is
going away. This is already how drm core deals with pending vblank
events, which are maintained by the drm core.

What saves us from a total disaster (ie. dereferencing and alrady
freed file_priv) is the fact that the fb descruction triggers a modeset
and there we wait for pending flips.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

sanitize_enable_ppgtt is the function that checks all the conditions,
honoring a forced ppgtt status or doing auto-detect as necessary.  Just
make sure it returns the right value in all cases and use that in the
macros instead of the confusing intel_enable_ppgtt() function.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Don't reenable full ppgtt through the backdoor.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace the semi-funky cmnlane assert/deassert macros with something a
bit more conventional. Also protect the macro arguments properly (also
for  PHY_POWERGOOD()).
Reviewed-by: NRafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It looks like frobbing the cmnreset line on pne PHY disturbs the other
PHY on chv. The result is a black screen. On HDMI it's just a flash of
black, but DP usually falls over and can't get back up.

As a workaround set up the power domains so that both common lane
wells power up and down together. I also tried leaving the cmnreset
deasserted even the if the power well goes down but that didn't seem
acceptable to the PHY.
Reviewed-by: NRafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHV has a third pipe so we need to compute the watermarks for its
planes. Add cherryview_update_wm() to do just that.

v2: Rebase on top of Imre's cxsr changes
v3: Pass crtc to vlv_update_drain_latency()
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of looping through all CRTCs, update DDL for current CRTC for which
watermark is being updated.
CHV is confirmed to have precision of 32/64 which is same as VLV.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The VLV/CHV DDL registers are uniform, and neatly enough the register
offsets are sane so we can easily unify them to a single set of defines
and just pass the pipe as the parameter to compute the register offset.

Note that we now fill out the drain latency for pipe C on CHV which we
didn't do before. The rest of the pipe C watermarks are still untouched
but that will be remedied later by adding a proper cherryview_update_wm()
function.

v2: Add a note about CHV pipe C changes (Paulo)
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add defines for all the watermark registers on modernish gmch platforms.

VLV has increased the number of bits available for certain watermaks so
expand the masks appropriately. Also vlv and chv have added some extra
FW registers.

Not sure what happened on chv because a new register called FW9 is now
at the offset where FW7 was on vlv, while FW7 and FW8 (another new
register) have been moved off somewhere else. Oh well, well just need
two defines for FW7 then.

v2: Fix DSPHOWM1 offset (Paulo)
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reset rotation property to 0.

v2: Resetting after disabling the plane
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sprite planes support 180 degree rotation. The lower layers are now in
place, so hook in the standard rotation property to expose the feature
to the users.

v2: Moving rotation_property to mode_config

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Propagate the error from intel_update_plane() up through
intel_plane_restore() to the caller. This will be used for
rollback purposes when setting properties fails.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Following the established idom, let's provide a macro to iterate through
the encoders.

spatch helps, once more, for the substitution:

  @@
  iterator name list_for_each_entry;
  iterator name for_each_intel_encoder;
  struct intel_encoder * encoder;
  struct drm_device * dev;
  @@
  -list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
  +for_each_intel_encoder(dev, encoder) {
    ...
  }

I also modified a few call sites by hand where a pointer to mode_config
was directly used (to avoid overflowing 80 chars).
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Wrap paramters correctly in the macro and remove spurious
space checkpatch noticed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

While those messages are interesting, there aren't _that_ interesting.
We don't need them in the kernel logs by default.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

cat i915_reg.h | sort | uniq -d | grep define
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We used to carry a default HDMI value in entry 9, but this entry got
removed for both HSW and BDW.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We always write entries 0 to 8 from the DDI translation tables and then
entry 9 for HDMI/DVI with the help of the VBT. We then don't need the
failsafe HDMI entry in the DP/eDP/FDI tables.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Among the changes, the tables has only 10 entries instead of 12 on HSW
and the index the the 800mV/0dB entry has changed.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The knowledge about the HDMI/DVI DDI translation table was scattered
around.
  - info->hdmi_level_shift was initialized with 6, the index of the 800
    mV, 0dB translation
  - A check on the VBT value was done to ensure it wasn't overflowing
    the translation table (< 0xC)
  - The actual programming was done in intel_ddi.c

As we need to change that knowledge for Broadwell, let's gather
everything into one place.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With this bit enabled, HW changes the color when compressing frames for
debug purposes.

ALthough the simple way to enable a single bit is over intel_reg_write,
this value is overwriten on next update_fbc so depending on the workload
it is not possible to set this bit with intel-gpu-tools. So this patch
introduces a persistent way to enable false color over debugfs.

v2: Use DEFINE_SIMPLE_ATTRIBUTE as Daniel suggested
v3: (Ville) only do false color for IVB+ since according to spec bit is
    MBZ before IVB.
v4: We don't have FBC on valleyview nor on cherryview (Ben)
v5: s/!HAS_PCH_SPLIT/!HAS_FBC (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I'm not really that insisting on checkpath compliance, but ragged
function paramter alignment does get me. Please adjust your editor to
just do this for you.

Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Updated the error log as suggested by Imre
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHV display PHY registes have two swing margin/deemph settings. Make it
clear which ones we're using.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHV was forgotten the intel_{dp,hdmi}_prepare() were introduced (or the
chv patches were still in flight?). Call these when enabling the ports.

Things tend to work much better when we actually write something
to the port registers :)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Split chv_update_pll() into two parts ala:
 commit bdd4b6a6
 Author: Daniel Vetter <daniel.vetter@ffwll.ch>
 Date:   Thu Apr 24 23:55:11 2014 +0200

    drm/i915: Extract vlv_prepare_pll
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We enable the DPLL refclock already when bringing up the cmnlane power
well, so also leave it on when otherwise disabling the DPLL.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Punit seems a bit WIP still. Disable cdclk changes until we have
hardware where it works.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Looks like the Punit is supposed to support the 400MHz cdclk directly on
chv, so we don't need the vlv tricks.

FIXME: Punit doesn't seem ready for this yet on current hw
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>