The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org

The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

fix the null pointer issue when runtime pm is triggered.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We recently improved our display atomic commit and tail sequence to
avoid some issues related to concurrency. One of the major changes
consisted of moving the interrupt disable and the stream release from
our atomic commit to our atomic tail (commit 6d90a208
("drm/amd/display: Move disable interrupt into commit tail")) .
However, the new code introduced inside our commit tail function was
inserted right after the function
drm_atomic_helper_update_legacy_modeset_state(), which has routines for
updating internal data structs related to timestamps. As a result, in
certain conditions, the display module can reach a situation where we
update our constants and, after that, clean it. This situation generates
the following warning:

 amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
 WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722
 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm]
 ...
 RIP:
 0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340
 [drm]
 ...
 Call Trace:
  ? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu]
  drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm]
  drm_get_last_vbltimestamp+0xad/0xc0 [drm]
  drm_reset_vblank_timestamp+0x63/0xd0 [drm]
  drm_crtc_vblank_on+0x85/0x150 [drm]
  amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu]
  commit_tail+0x99/0x130 [drm_kms_helper]
  drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper]
  amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
  drm_atomic_commit+0x4a/0x50 [drm]
  drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper]
  drm_mode_setcrtc+0x20b/0x7e0 [drm]
  ? tomoyo_path_number_perm+0x6f/0x200
  ? drm_mode_getcrtc+0x190/0x190 [drm]
  drm_ioctl_kernel+0xae/0xf0 [drm]
  drm_ioctl+0x245/0x400 [drm]
  ? drm_mode_getcrtc+0x190/0x190 [drm]
  amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
  __x64_sys_ioctl+0x91/0xc0
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 ...

For fixing this issue we rely upon a refactor introduced on
drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping
constant update from drm_atomic_helper_update_legacy_modeset_state()")
which decouples constant values update from
drm_atomic_helper_update_legacy_modeset_state to a new helper.
Basically, this commit uses this new helper and place it right after our
release module to avoid a situation where our CRTC struct gets wrong
values.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1349Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This has been stable for a while.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we have more than 4 displays we will run
into dummy irq calls or flip timout issues.
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There is a NULL pointer crash when DCN disabled on headless SKU.
On normal SKU, the variable adev->ddev.mode_config.funcs is
initialized in dm_hw_init(), and it is fine to access it in
amdgpu_device_resume(). But on headless SKU, DCN is disabled,
the funcs variable is not initialized, then crash arises.
Enable DCN to fix this issue.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NTianci.Yin <tianci.yin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In preparation to enabling hdcp on green sardine.

[How]
Add green-sardine ta f/w loading in psp_v12
Signed-off-by: NRoman Li <roman.li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we have more than 4 displays we will run
into dummy irq calls or flip timout issues.
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x

No need for a separate config option at this point.
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display Manager support for green_sardine
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display Core support for green_sardine
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable Green_Sardine VCN support and VCN firmware loading

v2: use apu flags
Signed-off-by: NThong Thai <thong.thai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch enable green_sardine_asd.bin loading.

v2: use apu flags
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize the SDMA IP for green_sardine.

v2: use apu flags
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable the gfx base HW function of green_sardine.

v2: use apu flags
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds common ip support for green_sardine.

v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds green_sardine support for gpu_info firmware and ip block setting.

v2: use apu flag
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Will be used for Green_Sardine which is a new APU.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

updated fw header v2 parser to set asd fw memory
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x

If we can't kvmalloc the pcrat_image, then we shouldn't memcpy
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update golden setting for sienna_cichlid.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Concurrent operation of VCN and JPEG decoder in DPG mode is
causing ring timeout due to power state.
Signed-off-by: NVeerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For kernel 5.10, this function was called twice right next to each
other in the same function due to what looks like a mis-merge.

Remove one of them.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Leads to improper dpm on older parts.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1353
Fixes: 8d89b96f ("drm/amd/powerplay: optimize the mclk dpm policy settings")
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit f8781228 ("drm/amdgpu:
Fix bug where DPM is not enabled after hibernate and resume").
It was intended to fix Hawaii S4(hibernation) issue but break S3. As
ixFEATURE_STATUS is filled with garbage data on resume which can be
only cleared by reloading smc firmware(but that will involve many
changes). So, we will revert this S4 fix and seek a new way.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NSandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So that the succeeding resume can be performed based on
a clean state.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NSandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Which can be used for S4(hibernation) support.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NSandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Correct some registers bitmasks and add mmBIOS_SCRATCH_7
reset.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NSandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can address the random SDMA hang after pci config reset
seen on Hawaii.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NSandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for headless NAVI ASICs
Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Navi14 0x7340/C9 SKU has no display and video support, remove them.
Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A kernel-doc markup can't be mixed with a random comment,
as it causes parsing problems.

While here, change an invalid kernel-doc markup into
a common comment.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/e899f50404e94ac9a7c3267dd34f951c1a44fb2b.1603791716.git.mchehab+huawei@kernel.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

	dm_comressor_info -> dm_compressor_info

The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9de495fa791596609eb2e73ba71cea99e09b2689.1603791716.git.mchehab+huawei@kernel.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

Running "make htmldocs: produce lots of warnings on those files:
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'
	./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init'

They're related to the repacement of some parameters by adev,
and due to a few renamed parameters.

While here, uniform the name of the parameter for it to be
the same on all functions using a pointer to struct amdgpu_device.

Update the kernel-doc documentation accordingly.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5755c2b361890b8ae5cea0f61dfd70b1c135eefe.1603791716.git.mchehab+huawei@kernel.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

It has been confirmed that the SMU metrics table should always reflect
the current fan speed even in manual mode.

Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11")
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fix the wrong fan speed in fan1_input when the fan control mode is manual.
the fan speed value is not correct when we set manual mode to fan1_enalbe - 1.
since the fan speed in the metrics table always reflects the real fan speed,we
can fetch the fan speed for both auto and manual mode.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Stop registering the SMU i2c bus on navi1x.  This leads to instability
issues when userspace processes mess with the bus and also seems to
cause display stability issues in some cases.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1314
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1341Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB

Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>