- 25 10月, 2012 7 次提交
-
-
由 Alan Stern 提交于
In preparation for splitting the ehci-hcd driver into a core library and separate platform-specific driver modules, this patch (as1616) moves the console logging macros from ehci-dbg.c to ehci.h, where they will be available to the platform drivers. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Chen 提交于
Without this condition, all controllers will do this delay, and increase the resume time. Only enabled and unsuspended port needs this delay, but Some buggy hardware(like Synopsys usb controller) will clear suspend bit once they receive/send resume signal, so it takes resume bit as consideration. Tested it at Freescale i.mx6q Sabrelite board. Signed-off-by: NPeter Chen <peter.chen@freescale.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jingoo Han 提交于
The devm_ functions allocate memory that is released when a driver detaches. This makes the code smaller and a bit simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jingoo Han 提交于
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_clk_get() for these functions. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Thomas Abraham 提交于
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Thomas Abraham 提交于
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Warren 提交于
Almost nothing from this file is used, and the file will hopefully be deleted soon. Copy the tiny portions that are used directly into ehci-tegra.c. I believe that Venu Byravarasu is working on cleaning up our USB driver, and those cleanups will remove the need for these constants. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NVenu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 10月, 2012 1 次提交
-
-
由 Florian Fainelli 提交于
Commit cfa49b4b (USB: ohci: merge ohci_finish_controller_resume with ohci_resume) merged ohci_finish_controller_resume with ohci_resume but forgot to update the ohci-sm501 driver accordingly, thus causing the folllowing build failure: drivers/usb/host/ohci-sm501.c: In function 'ohci_sm501_resume': drivers/usb/host/ohci-sm501.c:241:2: error: implicit declaration of function 'ohci_finish_controller_resume' [-Werror=implicit-function-declaration] Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 10月, 2012 26 次提交
-
-
由 Florian Fainelli 提交于
This patch changes the ohci-platform driver to use the device managed helper function for requesting memory region and ioremapping memory resources. As a result the error path in the probe function is simplified, and the platform driver remove callback does no longer need to release and iounmap memory resources. devm_request_and_ioremap() will use either the ioremap() or ioremap_nocache() handler depending on the resource's CACHEABLE flag, so we are good with this change. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This patch changes the ehci-platform driver to use the device managed helper function for requesting memory region and ioremapping memory resources. As a result the error path in the probe function is simplified, and the platform driver remove callback does no longer need to release and iounmap memory resources. devm_request_and_ioremap() will use either the ioremap() or ioremap_nocache() handler depending on the resource's CACHEABLE flag, so we are good with this change. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
We meant to write "resource" instead of "recourse", this patch fixes this typo. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
Fix the obvious typo in the error message, we meant to write "resource" instead of "recourse". Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This patch converts the ohci-platform driver to use dev_err() functions instead of pr_err(). Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This patch converts the ehci-platform driver to make use of the dev_err() functions instead of pr_err(). Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
A previous patch converted the Alchemy platform to use the OHCI and EHCI platform drivers. As a result, all the common logic to handle USB present in drivers/usb/host/alchemy-common.c has no reason to remain here, so we move it to arch/mips/alchemy/common/usb.c which is a more appropriate place. This change was suggested by Manuel Lauss. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
All users have been converted to use the OHCI platform driver instead, thus making ohci-au1xxx obsolete, remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
All users have been converted to use the OHCI platform driver instead, thus making ohci-sh obsolete, so remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
All users have been converted to use the OHCI platform driver instead, thus making ohci-xls obsolete, remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
All users have been converted to use the OHCI platform driver instead, thus making ohci-cns3xxx, so remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
The users have been converted to use the platform OHCI driver instead, thus making the ohci-pnx8550 driver obsolete, so remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
Merge ohci_finish_controller_resume with ohci_resume as suggested by Alan Stern. Since ohci_finish_controller_resume no longer exists, update the various OHCI drivers to call ohci_resume() instead. Some drivers used to set themselves the bit HCD_FLAG_HW_ACCESSIBLE, which is now handled by ohci_resume(). Acked-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
As suggested by Alan Stern, the code checking for the OHCI RH already suspended is no longer required since the bug it fixes has not been seen in ages. Remove that check making ohci_suspend much simpler. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
As suggested by Alan Stern, move the ohci-pci.c ohci_pci_{suspend,resume} routines to ohci-hcd.c. Due to their move, also rename them to ohci_{suspend,resume} to make it clear they operate on ohci_hcd. Since they are not necessarily called, annotate them with __maybe_unused, and make them enclosed within an #ifdef CONFIG_PM / #endif section. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This patch modifies the ohci platform driver to accept the num_ports parameter to be set via platform_data. Setting the number of ports must be done after the call to ohci_hcd_init(). Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
The users have been converted to use the ehci platform driver instead, thus making the ehci-cns3xxx driver obsolete, so remove it. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
The platform code has been converted to use the ehci-platform driver instead thus obsoleting the ehci-au1xxx driver, which can be removed. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
Enhance the ehci-platform driver to also accept no_io_watchdog as a platform data parameter. When no_io_watchdog is set to 1, the ehci controller will set ehci->need_io_watchdog to 0. Since most EHCI controllers do need the I/O watchdog to be on, only let those which need it to turn the watchdog off. Make sure that we change need_io_watchdog after the call to ehci_setup() because ehci_setup() will unconditionnaly set need_io_watchdog to 1. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
The platform code has been migrated to register the ehci-platform driver, thus obsoleting the ehci-xls driver, which can be removed. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
The platform code registering the Loongson 1B EHCI driver has now been converted to register the ehci-platform driver instead, thus obsoleting the ehci-ls1x driver, which can be removed. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This driver is not registered by any in-tree users, and if really needed by some out of tree user, the same functionnality can be restored using the ohci-platform driver using the following platform_data parameters: big_endian_desc = 1 big_endian_mmio = 1 no_big_frame_no = 1 Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Florian Fainelli 提交于
This driver is not registered by any in-tree user. If needed it the EHCI driver can be reinstatied using the ehci-platform driver with caps_offset to 0x100. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1614) updates the isochronous scheduling in ohci-hcd to match the new semantics for URB_ISO_ASAP. Testing revealed a hardware bug in the way my OHCI controller handles expired isochronous TDs; consequently the patch tries hard to avoid creating them (unlike the ehci-hcd and uhci-hcd drivers). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1613) updates the isochronous scheduling in uhci-hcd to match the new semantics for URB_ISO_ASAP. The amount of code alteration is smaller than it looks because of a change in the indentation level. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1612) updates the isochronous scheduling and processing in ehci-hcd to match the new semantics for URB_ISO_ASAP. It also adds a missing "unlikely" in sitd_complete() to match the corresponding statement in itd_complete(), and it increments urb->error_count in a couple of places that had been overlooked. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 10月, 2012 3 次提交
-
-
由 Alan Stern 提交于
This patch (as1610) replaces multiplication and divison operations in ehci-hcd's isochronous scheduling code with a bit-mask operation, taking advantage of the fact that isochronous periods are always powers of 2. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1609) changes the way ehci-hcd uses the "Isochronous Scheduling Threshold" in its calculations. Until now the code has ignored the threshold except for certain Intel PCI-based controllers. This violates the EHCI spec. The new code takes the threshold into account always, removing the need for the fs_i_thresh quirk flag. In addition it implements the "full frame cache" setting more efficiently, moving forward only as far as the next frame boundary instead of always moving forward 8 microframes. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1608) reworks the logic used by ehci-hcd for scheduling isochronous transfers. Now the modular calculations are all based on a window that starts at the last frame scanned for isochronous completions. No transfer descriptors for any earlier frames can possibly remain on the schedule, so there can be no confusion from schedule wrap-around. This removes the need for a "slop" region of arbitrary size. There's no need to check for URBs that are longer than the schedule length. With the old code they could throw things off by wrapping around and appearing to end in the near future rather than the distant future. Now such confusion isn't possible, and the existing test for submissions that extend too far into the future will also catch those that exceed the schedule length. (But there still has to be an initial test to handle the case where the schedule already extends as far into the future as possible.) Delays caused by IRQ latency won't confuse the algorithm unless they are ridiculously long (over 250 ms); they will merely reduce how far into the future new transfers can be scheduled. A few people have reported problems caused by delays of 50 ms or so. Now instead of failing completely, isochronous transfers will experience a brief glitch and then continue normally. (Whether this is truly a good thing is debatable. A latency as large as 50 ms generally indicates a bug is present, and complete failure of audio or video transfers draws people's attention pretty vividly. Making the transfers more robust also makes it easier for such bugs to remain undetected.) Finally, ehci->next_frame is renamed to ehci->last_iso_frame, because that better describes what it is: the last frame to have been scanned for isochronous completions. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 10月, 2012 1 次提交
-
-
由 Ben Collins 提交于
ehci_fsl_setup_phy is supposed to return an int, but had a void return value in the case of controller_ver being invalid. Introduced by commit 3735ba8d ("powerpc/usb: fix bug of CPU hang when missing USB PHY clock"), which missed one return. Signed-off-by: NBen Collins <ben.c@servergy.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2012 2 次提交
-
-
由 Alexis R. Cortes 提交于
This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by: NAlexis R. Cortes <alexis.cortes@ti.com> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tony Prisk 提交于
Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on arch-vt8500 when using devicetree. Without this patch, arch-vt8500 cannot detect ehci attached devices. Signed-off-by: NTony Prisk <linux@prisktech.co.nz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-