When saving a domain, the Xen tools need to remap all our mfns to
portable pfns.  In order to remap our p2m table, it needs to know
where all its pages are, so maintain the references to the p2m table
for it to use.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Rename dummy_shared_info to xen_dummy_shared_info and make it
non-static, in anticipation of users outside of enlighten.c
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When using sparsemem and memory hotplug, the kernel's pseudo-physical
address space can be discontigious.  Previously this was dealt with by
having the upper parts of the radix tree stubbed off.  Unfortunately,
this is incompatible with save/restore, which requires a complete p2m
table.

The solution is to have a special distinguished all-invalid p2m leaf
page, which we can point all the hole areas at.  This allows the tools
to see a complete p2m table, but it only costs a page for all memory
holes.

It also simplifies the code since it removes a few special cases.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a config option to set the max size of a Xen domain.  This is used
to scale the size of the physical-to-machine array; it ends up using
around 1 page/GByte, so there's no reason to be very restrictive.

For a 32-bit guest, the default value of 8GB is probably sufficient;
there's not much point in giving a 32-bit machine much more memory
than that.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We now support the use of memory hotplug, so the physical to machine
page mapping structure must be dynamic.  This is implemented as a
two-level radix tree structure, which allows us to efficiently
incrementally allocate memory for the p2m table as new pages are
added.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Make the needlessly global balloon_set_new_target() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Make sure resched interrupts appear in /proc/interrupts in the proper
place.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add xen handles realted definitions for xen memory which ia64/xen needs.
Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical
address (guest physical address) so that it is required to convert
guest kernel virtual address into pseudo physical address.
The xen guest handle represents such arguments.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

fix compilation error of ballon driver on ia64.
extent_start member is pointer argument. On x86 pointer argument for
xen hypercall is passed as virtual address.
On the other hand, ia64 and ppc, pointer argument is passed in pseudo
physical address. (guest physicall address.)
So they must be passed as handle and convert right before issuing hypercall.

  CC      drivers/xen/balloon.o
linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation':
linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation':
linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn':
linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment
linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec':
linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment
make[2]: *** [drivers/xen/balloon.o] Error 1
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

move arch/x86/xen/manage.c under drivers/xen/to share codes
with x86 and ia64.
ia64/xen also uses manage.c
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

For some perverse reason, if you call add_preferred_console() it prevents
setup_early_printk() from successfully enabling the boot console -
unless you make it a preferred console too...

Also, make xenboot console output distinct from normal console output,
since it gets repeated when the console handover happens, and the
duplicated output is confusing without disambiguation.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>

The pvfb backend indicates dynamic mode support by creating node
feature_resize with a non-zero value in its xenstore directory.
xen-fbfront sends a resize notification event on mode change.  Fully
backwards compatible both ways.

Framebuffer size and initial resolution can be controlled through
kernel parameter xen_fbfront.video.  The backend enforces a separate
size limit, which it advertises in node videoram in its xenstore
directory.

xen-kbdfront gets the maximum screen resolution from nodes width and
height in the backend's xenstore directory instead of hardcoding it.

Additional goodie: support for larger framebuffers (512M on a 64-bit
system with 4K pages).

Changing the number of bits per pixels dynamically is not supported,
yet.

Ported from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633Signed-off-by: NPat Campbell <plc@novell.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This isn't a security flaw (the backend can see all our memory
anyway).  But it's the right thing to do all the same.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

These are mostly for completeness and consistency with the other
frontends, as PVFB is typically compiled in rather than a module.

Derived from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e

While there, add module descriptions.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add z-axis motion to pointer events.  Backward compatible, because
there's space for the z-axis in union xenkbd_in_event, and old
backends zero it.

Derived from
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9
http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664Signed-off-by: NPat Campbell <plc@novell.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Without console= arguments on the kernel command line, the first
console to register becomes enabled and the preferred console (the one
behind /dev/console).  This is normally tty (assuming
CONFIG_VT_CONSOLE is enabled, which it commonly is).

This is okay as long tty is a useful console.  But unless we have the
PV framebuffer, and it is enabled for this domain, tty0 in domU is
merely a dummy.  In that case, we want the preferred console to be the
Xen console hvc0, and we want it without having to fiddle with the
kernel command line.  Commit b8c2d3df
did that for us.

Since we now have the PV framebuffer, we want to enable and prefer tty
again, but only when PVFB is enabled.  But even then we still want to
enable the Xen console as well.

Problem: when tty registers, we can't yet know whether the PVFB is
enabled.  By the time we can know (xenstore is up), the console setup
game is over.

Solution: enable console tty by default, but keep hvc as the preferred
console.  Change the preferred console to tty when PVFB probes
successfully, unless we've been given console kernel parameters.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add pte_flags() to extract the flags from a pte.  This is a special
case of pte_val() which is only guaranteed to return the pte's flags
correctly; the page number may be corrupted or missing.

The intent is to allow paravirt implementations to return pte flags
without having to do any translation of the page number (most notably,
Xen).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When enabling interrupts, we don't need to worry about preemption,
because we either enter with interrupts disabled - so no preemption -
or the caller is confused and is re-enabling interrupts on some
indeterminate processor.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The guest can legitimately change things like cr4.OSFXSR and
OSXMMEXCPT, so let it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the new sched_op hypercall, mainly because xenner doesn't support
the old one.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Xen will trap and emulate clts, but its better to use a hypercall.
Also, xenner doesn't handle clts.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When using "earlyprintk=xen", also write the console output to the raw
debug console.  This will appear on dom0's console if the hypervisor
has been compiled to allow it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add a couple of functions which can write directly to the Xen console
for debugging.  This output ends up on the host's dom0 console
(assuming it allows the domain to write there).
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used.  xen-unstable has now officially dropped
non-PAE support.  Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

driver uses symbols defined only on ARM
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Whether we sidestep it in init/main.c or not, such situations
will arise again; compiler does generate calls of strcat()
on optimizations, so we really ought to have an out-of-line
version...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... and we have few enough places using the latter to make it
simpler to do search and replace...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcpy() from userland pointer is a Bad Thing(tm)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fallout from commit 46d7b522 ("uml: move
hppfs_kern.c to hppfs.c")
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want sys/ptrace.h before any includes of linux/ptrace.h and
asm/user.h pulls the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>