After OS requests to down a link on a physical network port, the
traffic is no longer being processed but the physical link with
a link partner is still established.

Currently there is a feature (Link down on close) which allows
to physically bring the link down (after OS request).

With this patch new feature with similar capability is introduced:
TOTAL_PORT_SHUTDOWN
Allows to physically disable the link on the NIC's port.
If enabled, (after link down request from the OS)
no link, traffic or led activity is possible on that port.

If I40E_FLAG_TOTAL_PORT_SHUTDOWN is enabled, the
I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED must be explicitly forced to
true and cannot be disabled at that time.
The functionalities are exclusive in terms of configuration, but
they also have similar behavior (allowing to disable physical link
of the port), with following differences:
- LINK_DOWN_ON_CLOSE_ENABLED is configurable at host OS run-time
  and is supported by whole family of 7xx Intel Ethernet Controllers
- TOTAL_PORT_SHUTDOWN may be enabled only before OS loads (in BIOS)
  only if motherboard's BIOS and NIC's FW has support of it
- when LINK_DOWN_ON_CLOSE_ENABLED is used, the link is being brought
  down by sending phy_type=0 to NIC's FW
- when TOTAL_PORT_SHUTDOWN is used, phy_type is not altered, instead
  the link is being brought down by clearing bit
  (I40E_AQ_PHY_ENABLE_LINK) in abilities field of
  i40e_aq_set_phy_config structure

Introduced changes:
- new private flag I40E_FLAG_TOTAL_PORT_SHUTDOWN for handling the
  feature
- probe of NVM if the feature was enabled at driver's port
  initialization
- special handling on link-down procedure to let FW physically
  shutdown the port if the feature was enabled
Signed-off-by: NArkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: NAleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Convert all the remaining 'fall through" code comments to the newer
'fallthrough;' keyword.
Suggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

When mirror VI is enabled, replicate various VI config params
enabled on main VI to mirror VI. These include replicating MTU,
promiscuous mode, all-multicast mode, and enabled netdev Rx
feature offloads.

v3:
- Replace mirror VI refcount_t with normal u32 variable.
- Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
  was there in v1, but got missed in v2 during refactoring.

v2:
- Simplify the replication code by refactoring t4_set_rxmode()
  to handle mirror VI, instead of duplicating the t4_set_rxmode()
  calls in multiple places.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mirror VI is enabled, allocate the mirror Rxqs and setup the
mirror VI RSS table. The mirror Rxqs are allocated/freed when
the mirror VI is created/destroyed or when underlying port is
brought up/down, respectively.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Use mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
- Remove the un-needed mirror Rxq mutex.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add mirror Virtual Interface (VI) support to receive all ingress
mirror traffic from the underlying device. The mirror VI is
created dynamically, if the TC-MATCHALL rule has a corresponding
mirror action. Also request MSI-X vectors needed for the mirror VI
Rxqs. If no vectors are available, then disable mirror VI support.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Add mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/pcnet32.c:2928:12: warning:
'pcnet32_pm_resume' defined but not used [-Wunused-function]
 2928 | static int pcnet32_pm_resume(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/pcnet32.c:2916:12: warning:
'pcnet32_pm_suspend' defined but not used [-Wunused-function]
 2916 | static int pcnet32_pm_suspend(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: a86688fb ("pcnet32: Convert to generic power management")
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/amd8111e.c:1623:12: warning:
'amd8111e_resume' defined but not used [-Wunused-function]
 1623 | static int amd8111e_resume(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/amd8111e.c:1584:12: warning:
'amd8111e_suspend' defined but not used [-Wunused-function]
 1584 | static int amd8111e_suspend(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: 2caf751f ("amd8111e: Convert to generic power management")
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Shrink the code by using the managed variant of of_mdiobus_register().
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement a managed variant of of_mdiobus_register(). We need to make
mdio_devres into its own module because otherwise we'd hit circular
sumbol dependencies between phylib and of_mdio.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently have two managed helpers for mdiobus - devm_mdiobus_alloc()
and devm_mdiobus_register(). The idea behind devres is that the release
callback releases whatever resource the devm function allocates. In the
mdiobus case however there's no devres associated with the device by
devm_mdiobus_register(). Instead the release callback for
devm_mdiobus_alloc(): _devm_mdiobus_free() unregisters the device if
it is marked as managed.

This all seems wrong. The managed structure shouldn't need to know or
care about whether it's managed or not - and this is the case now for
struct mii_bus. The devres wrapper should be opaque to the managed
resource.

This changeset makes devm_mdiobus_alloc() and devm_mdiobus_register()
conform to common devres standards: devm_mdiobus_alloc() allocates a
devres structure and registers a callback that will call mdiobus_free().
__devm_mdiobus_register() allocated another devres and registers a
callback that will unregister the bus.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function is not documented. Add a short kerneldoc description.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Functions should only be static inline if they're very short. This
devres helper is already over 10 lines and it will grow soon as we'll
be improving upon its approach. Pull it into mdio_devres.c.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The idea behind devres is that the release callbacks are called if
probe fails. As we now check the return value of ixgbe_mii_bus_init(),
we can drop the call devm_mdiobus_free() in error path as the release
callback will be called automatically.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function may fail. Check its return value and propagate the error
code.
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Find ports accessible by the VF, based on the index of the
mac address stored for the VF in the adapter. If no mac address
is stored for the VF, use the port mask provided by firmware.
Signed-off-by: NNirranjan Kirubaharan <nirranjan@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qede source files.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qed source files.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: NAlexander Lobakin <alobakin@marvell.com>
Signed-off-by: NIgor Russkikh <irusskikh@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error return path when create_singlethread_workqueue fails currently
does not kfree tls and leads to a memory leak. Fix this by kfree'ing
tls before returning -ENOMEM.

Addresses-Coverity: ("Resource leak")
Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EF100 won't have an efx->type->tx_remove method, because there's
 nothing for it to do.  So make the call conditional.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saves a whole #include from nic.c.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ef100 will need to check this against NIC limits.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define it in nic_common.h, even though the ef100 driver will have a
 different implementation backing it (actually a WARN_ON_ONCE as it
 should never get called by ef100.  But it needs to still exist because
 common TX path code references it).
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ef100 will need this if it gets GSO skbs it can't handle (e.g. too long
 header length).
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ef100 RX path will also need to DMA-sync RX buffers.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor it a little as we go, and introduce efx_mcdi_set_mtu() which we
 will later use for ef100 to change MTU without touching other MAC settings.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Various left-over bits and pieces from efx.c that are needed by ef100.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both the licence notice and the SPDX tag were missing from this file.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most of it was already declared in mcdi_port_common.h, so just move the
 implementations to mcdi_port_common.c.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions are implemented in mcdi_port.c, which will not be linked
 into the EF100 driver; thus their prototypes should not be visible in
 common header files.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bcm_sf2 only appears to support pause modes on RGMII interfaces (the
enable bits are in the RGMII control register.)  Setup the pause modes
for RGMII connections.
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the bcm_sf2 to use the finalised speed and duplex in its
mac_link_up() call rather than the parameters in mac_config().
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

state->link has never been valid in mac_config() implementations -
while it may be correct in some calls, it is not true that it can be
relied upon.

Fix bcm_sf2 to use the correct method of handling forced link status.
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the B53 driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config(). This is
just a matter of moving the call to b53_force_port_config().
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>