Added vega20 overdrive support based on existing OD sysfs
APIs. However, the OD logics are simplified on vega20. So,
the behavior will be a little different and works only on
some limited levels.

V2: fix typo
    fix commit description
    revise error logs
    add support for clock OD

V3: separate clock from voltage OD settings
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display can notify smu to enable pwe after gpu suspend.
It is used in case when display resumes from S3 and wants to start
audio driver by enabling pwe
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use void * as function parameter type in order for extension.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some HW ip blocks need call SMU to enter/leave power gate state.
So export common set_powergating_by_smu interface.

1. keep consistent with set_clockgating_by_smu
2. scales easily to powergate other ip(gfx) if necessary
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In order to keep consistent with powergate_uvd/vce.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when user cat pp_od_clk_voltage
add display info about the sclk/mclk/vddc range that user can overdrive
output as:
OD_SCLK:
0:        300MHz        900mV
1:        400MHz        912mV
2:        500MHz        925mV
3:        600MHz        937mV
4:        700MHz        950mV
5:        800MHz        975mV
6:        900MHz        987mV
7:       1000MHz       1000mV
OD_MCLK:
0:        300MHz        900mV
1:       1500MHz        912mV
OD_RANGE:
SCLK:     300MHz       1200MHz
MCLK:     300MHz       1500MHz
VDDC:     700mV        1200mV

also
1. remove unnecessary whitespace before a quoted newline
2. change unit of frequency Mhz to MHz
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently smu only calculate average gpu power in real time.

for vddc/vddci/max power,
User need to set start time and end time, firmware can calculate
the average vddc/vddci/max power. but the type of return values
is not unified. For Vi, return type is uint.
For vega, return type is float.

so this struct can't be suitable for all asics.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. delete amdgpu_powerplay.c used for wrapping smu ip functions
2. delete struct pp_instance,
3. make struct hwmgr as the smu hw handle.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add power profiling mode dynamic switch based on the workloads.
Currently, support Cumpute, VR, Video, 3D,power saving with Cumpute
have highest prority, power saving have lowest prority.

in manual dpm mode, driver will stop auto switch, just save the client's
requests. user can set power profiling mode through sysfs.

when exit manual dpm mode, driver will response the client's requests.
switch based on the client's prority.

v2: squash in fixes from Rex
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The gfx/compute profiling mode switch is only for internally
test. Not a complete solution and unexpectly upstream.
so revert it.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use adev as input parameter to create powerplay instance
directly. delete cgs wrap layer for power play create.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

User can change power limit between
[0, 1] * max power limit.

Set power limit to 0, restore to max power limit.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is also supported with the read_sensor API and there
were no more users of the get_temperature API.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when cat pp_od_clk_voltage it show
OD_SCLK:
0:        300Mhz        800 mV
1:        466Mhz        818 mV
2:        751Mhz        824 mV
3:       1019Mhz        987 mV
4:       1074Mhz       1037 mV
5:       1126Mhz       1087 mV
6:       1169Mhz       1137 mV
7:       1206Mhz       1150 mV
OD_MCLK:
0:        300Mhz        800 mV
1:       1650Mhz       1000 mV

echo "s/m level clock voltage" to change
sclk/mclk's  clock and voltage

echo "r" to restore default value.
echo "c" to commit the user setting.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add odn_edit_dpm_table function
points for setting user assigned clock/voltage.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The additional output are: PSTATE_SCLK and PSTATE_MCLK value
in MHz as:

300 MHz (PSTATE_SCLK)
300 MHz (PSTATE_MCLK)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

when cat pp_power_profile_mode on Vega10
NUM        MODE_NAME BUSY_SET_POINT FPS USE_RLC_BUSY MIN_ACTIVE_LEVEL
  0 3D_FULL_SCREEN :             70  60          1              3
  1   POWER_SAVING :             90  60          0              0
  2          VIDEO*:             70  60          0              0
  3             VR :             70  90          0              0
  4       COMPUTER :             30  60          0              6
  5         CUSTOM :              0   0          0              0

the result show all the profile mode we can support and custom mode.
user can echo the num(0-4) to pp_power_profile_mode to select the profile
mode or can echo "5 value value value value" to enter CUSTOM mode.
the four parameter is set_point/FPS/USER_RLC_BUSY/MIN_ACTIVE_LEVEL.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

other parameter
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NErnst Sjöstrand <ernstp@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used to set up smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move powerplay and amdgpu shared structures
and definitions to kgd_pp_interface.h.  This
is the interface between the base driver
and powerplay.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Amdgpu asic types will be required for other drivers too.
Hence, its better to keep it in a separate include file.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

renamed amdgpu_dpm_funcs and moved to amd_shared.h
so can shared with powerplay.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RAVEN is a new APU.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add common fan enums that can be used for both
powerplay and dpm.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP is responsible for firmware loading on SOC-15 asics.

v2: fix memory leak (Ken)
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On SOC-15 parts, the GMC (Graphics Memory Controller) consists
of two hubs: GFX (graphics and compute) and MM (sdma, uvd, vce).

v2: drop sdma from Makefile, fix duplicate return statement.
Signed-off-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NKen Wang <Qingqing.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>